35.260 办公机械 标准查询与下载
共找到 215 条与 办公机械 相关的标准，共 15 页
This technical specification introduces safeguards to reduce the likelihood of room flash-over as a result of accidental ignition of exterior housings of audio/video and information communication technology products likely to be used in the home, caused by a candle flame. NOTE According to AC/22/2009 and SMB decision 135/20, this technical specification should currently only be used for television sets. It can be used for other products only if a risk assessment indicates problems with these products.
Safeguards againts accidentally caused candle flame ignition for audio/video, communication and information technology equipment
- ICS
- 35.260
- CCS
- 发布
- 2014-12-25
- 实施
This International Standard specifies the principal widths to be retained for fabric printing ribbons of 19 mm (0.75 in) width and less, on spools, intended for office machines and printing machines used for information processing. In case of two-coloured fabric printing ribbons, this International Standard also specifies the widths of the colour bands. Ribbons of more than 19 mm width are the subject of International Standard ISO 3866.
Office machines and printing machines used for information processing -- Widths of fabric printing ribbons on spools
- ICS
- 35.260
- CCS
- 发布
- 2013-12-31
- 实施
This International Standard lays down rules with the essential object of facilitating the storage and distribution of printing ribbons on the premises of manufacturers, dealers and users. It specifies the type and form of the minimum information to appear on containers used as a packaging unit for printing ribbons wound on spools or cores.
Printing ribbons -- Minimum markings to appear on containers
- ICS
- 35.260
- CCS
- 发布
- 2013-12-31
- 实施
This International Standard applies to dictation machines, transcription machines and to combined dictation and transcription machines. Its purpose is — to define the role of these machines; — to list and describe elements intended to ensure the simple and effective operation of machines and, where appropriate, to specify basic operating requirements for those elements.
Dictation equipment -- Basic operating requirements
- ICS
- 35.260
- CCS
- 发布
- 2013-12-31
- 实施
Office machines－Minimum information to be included in specification sheets－Part 3：Postal franking machines
- ICS
- 35.260
- CCS
- 发布
- 20131126
- 实施
- 20131126
Office machines－Minimum information to be included in specification sheets－Part 3：Postal franking machines
- ICS
- 35.260
- CCS
- 发布
- 2013-11-26
- 实施
Abstract Identifies the minimum line and character capacity of address masters as a first attempt to work towards the rationalization of the existing capacity of address masters.
Office machines -- Line and character capacity of address masters
- ICS
- 35.260
- CCS
- 发布
- 2013-09-09
- 实施
Abstract Includes the principal widths to be retained for narrow one-time paper or plastic printing ribbons (19 mm width and less) intended for office machines and printing machines used for information processing. Also defines the location of the marking indicating the approach of the end of the ribbons for office machines. Reference: ISO 2257.
Office machines and printing machines used for information processing - Widths of one-time paper or plastic printing ribbons and marking to indicate the end of the ribbons
- ICS
- 35.260
- CCS
- 发布
- 2013-09-09
- 实施
Information technology equipment - Safety - Part 1: General requirements
- ICS
- 35.260
- CCS
- 发布
- 2013-05-28
- 实施
Office machines - Destruction of data carriers - Part 3: Process for destruction of data carriers
- ICS
- 35.260
- CCS
- Y54
- 发布
- 2013-02
- 实施
Information technology. Office equipment
- ICS
- 35.260
- CCS
- Y54
- 发布
- 2013-01-31
- 实施
- 2013-01-31
Information technology equipment - Safety - Part 1: General requirements
- ICS
- 35.260
- CCS
- 发布
- 2013
- 实施
- 0000-00-00
Classification for Serviceability of an Office Facility for Structure and Building Envelope
- ICS
- 35.260
- CCS
- P20
- 发布
- 2013
- 实施
Information technology - Office equipment - Information to be included in specification sheets - Data projectors
- ICS
- 35.260
- CCS
- Y54
- 发布
- 2012-12
- 实施
Office machines - Destruction of data carriers - Part 2: Requirements for equipment for destruction of data carriers
- ICS
- 35.260
- CCS
- Y54
- 发布
- 2012-10-01
- 实施
Office machines - Destruction of data carriers - Part 1: Principles and definitions
- ICS
- 35.260
- CCS
- Y54
- 发布
- 2012-10-01
- 实施
Information technology equipment - Safety - Part 1: General requirements
- ICS
- 35.260
- CCS
- 发布
- 2012-05-10
- 实施
1.1 This classification covers pairs of scales for classifying an aspect of the serviceability of an office facility, that is, the capability of an office facility to meet certain possible requirements to enable work groups or project groups to function effectively and productively. 1.2 Within that aspect of serviceability, each pair of scales, shown in Figs. 1-4, are for classifying one topic of serviceability. Each paragraph in an Occupant Requirement Scale (see Figs. 1-4) summarizes one level of serviceability on that topic, which occupants might require. The matching entry in the Facility Rating Scale (see Figs. 1-4) is a translation of the requirement into a description of certain features of a facility which, taken in combination, indicate that the facility is likely to meet that level of required serviceability. 1.3 The entries in the Facility Rating Scale (see Figs. 1-4) are indicative and not comprehensive. They are for quick scanning to estimate approximately, quickly, and economically, how well an office facility is likely to meet the needs of one or another type of occupant group over time. The entries are not for measuring, knowing, or evaluating how an office facility is performing. 1.4 This classification can be used to estimate the level of serviceability of an existing facility. It can also be used to estimate the serviceability of a facility that has been planned but not yet built, such as one for which single-line drawings and outline specifications have been prepared. 1.5 This classification indicates what would cause a facility to be rated at a certain level of serviceability but does not state how to conduct a serviceability rating nor how to assign a serviceability score. That information is found in Practice E1334. The scales in this classification are complimentary to and compatible with Practice E1334. Each requires the other.
Standard Classification for Serviceability of an Office Facility for Meetings and Group Effectiveness
- ICS
- 35.260
- CCS
- 发布
- 2012-04-01
- 实施
1.1 This classification covers pairs of scales for classifying an aspect of the serviceability of an office facility, that is, the capability of an office facility to meet certain possible requirements for special facilities and technologies. 1.2 Each pair of scales shown in Figs. 1-6 printed side-byside on a page, are for classifying one topic of serviceability within that aspect of serviceability. Each paragraph in an Occupant Requirement Scale (see Figs. 1-6) summarizes one level of serviceability on that topic that occupants might require. The matching entry in the Facility Rating Scale (See Figs. 1-6) is a translation of the requirement into a description of certain features of a facility that, taken in combination, indicate that the facility is likely to meet that level of required serviceability. 1.3 The entries in the Facility Rating Scale (See Figs. 1-6) are indicative and not comprehensive. They are for quick scanning, to estimate approximately, quickly, and economically, how well an office facility is likely to meet the needs of one or another type of occupant group over time. The entries are not for measuring, knowing, and evaluating how an office facility is performing. 1.4 This classification can be used to estimate the level of serviceability of an existing facility. It can also be used to estimate the serviceability of a facility that has been planned but not yet built, such as one for which single-line drawings and outline specifications have been prepared. 1.5 This classification indicates what would cause a facility to be rated at a certain level of serviceability, but it does not state how to conduct a serviceability rating nor how to assign a serviceability score. That information is found in Practice E1334. The scales in this classification are complementary to and compatible with Practice E1334. Each requires the other.
Standard Classification for Serviceability of an Office Facility for Special Facilities and Technologies
- ICS
- 35.260
- CCS
- 发布
- 2012-04-01
- 实施
IEC/TS 62441:2011 Introduces safeguards to reduce the likelihood of room flash-over as a result of accidental ignition of exterior housings of audio/video and information communication technology products likely to be used in the home, caused by a candle flame. This second edition of IEC 62441 cancels and replaces the first edition published in 2006 and constitutes a technical revision. This edition includes the following technical changes with respect to the previous edition: - acceptance of wood with a minimum thickness as equivalent to V-1; - interpretation information regarding vertical surfaces.
Safeguards against accidentally caused candle flame ignition for audio/video, communication and information technology equipment
- ICS
- 35.260
- CCS
- 发布
- 2012-02-24
- 实施
- 2012-07-23 (7)
