37.040.20 相纸、胶卷和暗盒 标准查询与下载

ISO/TR 20791-1:2020 摄影.摄影反射印刷品.第1部分:图像质量的评定方法

Photography — Photographic reflection prints — Part 1: Evaluation methods of image quality

ISO 18936:2020 成像材料 - 加工颜色照片 - 测量热稳定性的方法

This document describes test methods for determining the long-term dark storage stability of colour photographic images. It is applicable to colour photographic images made with traditional photographic materials. These images are generated with systems such as chromogenic, silver dye-bleach, dye transfer, dye-diffusion- transfer “instant”, and similar systems. The test method specified in this document also covers the dark-stability of digital colour images produced with dry- and liquid-toner electrophotography, thermal dye transfer (sometimes called “dye sublimation”), and inkjet printing systems.

Imaging materials — Processed colour photographs — Methods for measuring thermal stability

BS ISO 18941:2020 成像材料 彩色反光印花 臭氧气体褪色稳定性试验方法

What is  ISO 18941 about ?      ISO 18941 describes the equipment, methods, and procedures for generating a known ozone exposure and the subsequent measurement and quantification of the amount of change produced within both digitally printed hardcopy images and traditional analog photographic color print images due to that exposure.    The test method described in ISO 18941 uses increased levels of ozone to achieve an accelerated test. If the principal “gas fading” mechanism for a system is not ozone, this method might not be suitable and might give misleading results as to resistance of the test image to polluted air.     Who is  ISO 18...

Imaging materials. Colour reflection prints. Test method for ozone gas fading stability

ISO 18941:2020 成像材料 - 彩色反射印刷 - 臭氧气体褪色稳定性测试方法

This document describes the equipment, methods and procedures for generating a known ozone exposure and the subsequent measurement and quantification of the amount of change produced within both digitally printed hardcopy images and traditional analogue photographic colour print images due to that exposure. The test method described in this document uses increased levels of ozone to achieve an accelerated test. If the principal “gas fading” mechanism for a system is not ozone, this method might not be suitable and might give misleading results as to resistance of the test image to polluted air.

Imaging materials — Colour reflection prints — Test method for ozone gas fading stability

ISO/TR 18942:2020 成像材料.家用照相彩色印刷品图像持久性的评定

Imaging materials — Evaluation of image permanence of photographic colour prints in consumer home applications

20/30381918 DC BS ISO 18947-1 成像材料和印刷品 耐磨性 第 1 部分：一般摩擦测试方法

BS ISO 18947-1. Imaging materials and prints. Abrasion resistance - Part 1. General rub testing methods

20/30381921 DC BS ISO 18947-2 成像材料和印刷品 耐磨性 第 2 部分：照相照片的摩擦测试

BS ISO 18947-2. Imaging materials and prints. Abrasion resistance - Part 2. Rub testing of photographic prints

ISO 18937:2020 成像材料 - 摄影反射印刷 - 测量室内光稳定性的方法

This document describes test equipment and procedures for measuring the light stability of colour photographic reflection prints designed for display, when subjected to a filtered xenon-arc light source simulating daylight through windows at specified temperatures and relative humidity. This document is applicable to photographic reflection prints, made with analogue and digital print processes. The recommended test methods can be applied to both colour and black-and-white photographic prints. This test method assesses colour and density change.

Imaging materials — Photographic reflection prints — Methods for measuring indoor light stability

KS A ISO 6846-2019 摄影 黑白连续色调纸 打印时ISO感光度和ISO范围的测定

Photography－Black-and-white continuous-tone papers－Determination of ISO speed and ISO range for printing

KS A 3604-2019 安全摄影胶片

Safety photographic films

HG/T 3558-2019 胶片、片基含湿量测定方法

Method for determination of moisture content of films and film bases

ASTM E1735-19 测定工业射线照相成像系统从4到25兆电子伏的相对图像质量响应的标准实施规程

1.1 This standard provides a practice whereby industrial radiographic imaging systems or specific factors that affect image quality (that is, hardware, techniques, etc.) may be comparatively assessed using the concept of relative image quality response (RIQR) when exposed to X-radiation sources having photon energies from 4 to 25 MeV. The RIQR method presented within this practice is based upon the use of equivalent penetrameter sensitivity (EPS) described within Practice E1025 and Section 5 of this practice. For special applications, the user may design a non-standard RIQIabsorber configuration; however, the RIQI configuration shall be controlled by a drawing similar to Fig. 1. Use of a non-standard RIQI-absorber configuration shall be described in the user’s written technique and approved by the RT Level III. 1.2 This practice is not intended to qualify the performance of a specific radiographic technique nor for assurance that a radiographic technique will detect specific discontinuities in a specimen undergoing radiographic examination. 1.3 This practice is not intended to be used to classify or derive performance classification categories for radiographic imaging systems. For example, performance classifications of radiographic film systems may be found within Test Method E1815, manufacturer characterization of computed radiography (CR) systems may be found in Practice E2446, and manufacturer characterization of digital Detector Array (DDA) systems may be found in Practice E2597. 1.4 This standard is not intended to be used with Cobalt 60 sources or X-ray sources below 4 MeV. For low energy X-ray applications (below 4 MeV), Test Method E746 provides a similar RIQR standard practice. 1.5 The values stated in either SI or inch-pound units are to be regarded as the standard. The values given in parentheses are for information only. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Determining Relative Image Quality Response of Industrial Radiographic Imaging Systems from 4 to 25 MeV

ISO/TS 21139-1:2019 商业印刷品的持久性和耐久性.第1部分:使用轮廓的定义和规范的指导原则

Permanence and durability of commercial prints — Part 1: Definition of use profiles and guiding principles for specifications

BS ISO 18949:2019 成像材料 反射彩色摄影照片 低湿度条件下稳定性测试方法

What is ISO 18949 - Reflection colour photographic prints about ? ISO 18949 discusses evaluating the reflection colour photographic prints .   ISO 18949 describes test methods to evaluate reflection colour photographic prints with regard to changes in image appearance resulting from exposure to low relative humidity.   The observed changes relate primarily to substrate yellowing. Other observed humidity related physical damage factors such as curl, cockle, cracking, or delamination due to humidity cycling are also within the scope of this test method.    Who is ISO 18949 - Reflection colour photographic prints for ? ISO 18949

Imaging materials. Reflection colour photographic prints. Method for testing stability under low humidity conditions

ISO 18949:2019 成像材料.反射彩色照相版画.低湿度条件下稳定性试验方法

This document describes test methods to evaluate reflection colour photographic prints with regard to changes in image appearance resulting from exposure to low relative humidity. The observed changes relate primarily to substrate yellowing. Other observed humidity related physical damage factors such as curl, cockle, cracking, or delamination due to humidity cycling are also within the scope of this test method.

Imaging materials — Reflection colour photographic prints — Method for testing stability under low humidity conditions

ISO/TS 21139-21:2019 商业印刷品的持久性和耐久性.第21部分:橱窗展示.光和臭氧稳定性

Permanence and durability of commercial prints — Part 21: In-window display — Light and ozone stability

HG/T 5501-2018 彩色激光打印片

Color laser printing sheet

HG/T 5502-2018 N-甲基-4-（对甲酰苯乙烯基）吡啶甲基硫酸盐

N-Methyl-4-(p-formylstyryl)pyridylmethylsulfate

BS ISO 18944:2018 成像材料.反射色摄影印制品.测试打印结构和测量

Imaging materials. Reflection colour photographic prints. Test print construction and measurement

ASTM E2245-11(2018) 使用光学干涉仪的薄的反射膜的残余应变测量的标准测试方法

1.1 This test method covers a procedure for measuring the compressive residual strain in thin films. It applies only to films, such as found in microelectromechanical systems (MEMS) materials, which can be imaged using an optical interferometer, also called an interferometric microscope. Measurements from fixed-fixed beams that are touching the underlying layer are not accepted. 1.2 This test method uses a non-contact optical interferometric microscope with the capability of obtaining topographical 3-D data sets. It is performed in the laboratory. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Residual Strain Measurements of Thin, Reflecting Films Using an Optical Interferometer