37.040.20 相纸、胶卷和暗盒 标准查询与下载

HG/T 4865-2015 紫外光固化(UV)油墨用阳图热敏计算机直接制版(CTP)版材

本标准规定了紫外光固化(UV)油墨用阳图热敏CTP版的要求、试验方法、检验规则、包装及标志、贮存和运输。 本标准适用于以铝版基为支持体涂布热敏感光层制成的耐UV油墨阳图热敏CTP版。该版材用于波长为830 nm激光光源的计算机直接制版机的制版。

Thermal CTP Plate for UV-ink Printing

HG/T 4866-2015 非银数字化医疗影像喷墨蓝胶片

本标准规定了非银数字化医疗影像喷墨蓝胶片的要求，检验方法，检验规则，包装、标志、运输和贮存。 本标准适用于非银数字化医疗影像喷墨蓝胶片。

Non-silver digital medical image ink-jet blue film

HG/T 4867-2015 数码一体速印机用热敏版纸

本标准规定了数码一体速印机用热敏版纸的型号及组成，要求，试验方法，检验规则，标志、包装、运输和贮存。 本标准适用于数码一体速印机用热敏版纸。

Master for digital duplicator

HG/T 4868-2015 数码一体速印机用油墨盒

本标准规定了数码一体速印机用油墨盒的型号及分类，要求，试验方法，检验规则，标志、包装、运输和贮存。 本标准适用于数码一体速印机所用的盒装油墨。

Digital ink cartridge for digital duplicator

HG/T 4744-2014 照相明胶 重均分子量及其分布的测定 凝胶过滤色谱法

本标准规定了照相明胶的重均分子量及其分布的测定方法。 本标准适用于感光材料用照相明胶的重均分子量及其分布的测定。

Determination of average molecular weight and molecular weight distribution of photographic gelatin by GFC

HG/T 4743-2014 低化学处理紫激光光聚合CTP版

本标准规定了低化学处理紫激光光聚合CTP (计算机直接制版，computer to plate)版的要求、试验方法、检验规则、包装及标志、贮存和运输。 本标准适用于以铝版基为支持体、涂布紫激光光敏层以及保护层制成的低化学处理紫激光光聚合CTP版。用于波长为405 nm激光光源的计算机直接制版机的制版，并采用低化学处理方式(处理液pH值在7. 2～9. 5之间)进行显影加工。

Low chemical processing violet photopolymer CTP plates

GSO ISO 10505:2014 摄影 胶片均方根颗粒度 测量方法

This International Standard describes a method for determining the intrinsic root mean square granularity (rms-granularity) of photographic films. Intrinsic rms-granularity refers to those density fluctuations produced solely by the distribution of developed image forming centres in the photographic emulsion. Continuous-tone monochrome (silver absorbing species) and colour (dye absorbing species) materials coated on a transmitting support can be measured by the procedures described in this International Standard. This International Standard is intended for imaging systems with viewing magnifications between 5× and 12× (see Annex A). The following kinds of granularity measurements are not covered by this International Standard, even though they are photographically important: — reflecting materials (photographic papers); — materials having emulsion coated on both sides of the support (e.g. some X-ray films); — the estimation of the noise power spectrum (Wiener spectrum).

Photography -- Root mean square granularity of photographic films -- Method of measurement

BS ISO 18944:2014 成像材料.反射色摄影印制品.测试打印结构和测量

Imaging materials. Reflection colour photographic prints. Test print construction and measurement

ISO 18944:2014 成像材料.反射彩色摄影照片.测试打印结构和测量

Imaging materials - Reflection colour photographic prints - Test print construction and measurement

ISO/CD 18937-3:2014 成像材料 相片室内光稳定性的测量方法 第3部分：LED灯曝光

Imaging materials — Methods for measuring indoor light stability of photographic prints — Part 3: LED lamp exposure

HG/T 4578-2014 喷墨计算机直接制版(CTP)版材

本标准规定了喷墨计算机直接制版(CTP)版材的技术要求、检验方法、检验规则,以及包装标志、贮存和运输的要求。本标准适用于经粗化和阳极氧化处理过的铝版基为支持体的带喷墨打印接收层的喷墨计算机直接制版(CTP)版材。

CTP plate with inkjet printing

HG/T 4579-2014 喷墨计算机直接制版(CTP)墨水

本标准规定了喷墨计算机直接制版(CTP)墨水的技术要求、检验方法、检验规则,以及包装标志、贮存和运输的要求。本标准适用于用于喷墨计算机直接制版(CTP)版材制版的通过加热固化的喷墨计算机直接制版(CTP)墨水。

Inkjet printing ink for CTP plate

HG/T 4577-2014 数字化喷墨印刷紫外光固化油墨

本标准规定了喷墨印刷机用无溶剂的数字化喷墨印刷紫外光固化油墨的产品要求、试验方法、检验规则和标志、包装、运输及贮存。本标准适用于采用压电型喷头喷墨印刷机用无溶剂的数字化喷墨印刷紫外光固化油墨,主要有黄、品、青、黑四种颜色。

UV-curable ink for digital inkjet printing

ISO 18937:2014 成像材料. 已冲洗照片. 室内光稳定性的测量方法

This International Standard describes test equipment and procedures for measuring the light stability of images of colour photographic reflection prints designed for display in, for example, houses, apartments, other dwelling places, offices and commercial display, when subjected to certain illuminants at specified temperatures and relative humidities. This International Standard also addresses colour photographic reflection prints designed for display in galleries and museums. Indoor illumination conditions described in this International Standard include a) simulated indoor daylight typical home display, b) simulated direct sunlight in-window display, c) fluorescent illumination using “cool white”, and d) other types of illumination sources, such as other fluorescent lamps, tungsten halogen, LED, OLED and metal halide lamps. This International Standard is applicable to reflection colour prints made with colour hardcopy materials. Included are inkjet prints, thermal dye diffusion transfer (“dye-sub”) prints, liquid- and dry-toner electrophotographic prints, prints made with traditional chromogenic (“silver-halide”) photographic colour materials and, in general, all types of colour prints made with direct analog and digital print processes. The recommended evaluation methods can also be applied to black-and-white photographic prints. This International Standard does not include test procedures for determining the effects of light exposure on the physical stability of images, supports or binder materials. However, it is recognized that in some instances, physical degradation, such as support embrittlement, image layer cracking or delamination of an image layer from its support, rather than the stability of the image itself, will determine the useful life of a print material. Print image stability results determined for one printer model, software settings, colourant and media combination might not be applicable to image prints produced through another printer model, software settings, colourant and media combination.

Imaging materials - Photographic reflection prints - Methods for measuring indoor light stability

BS ISO 18937:2014 成像材料. 已冲洗照片. 室内光稳定性的测量方法

Imaging materials. Photographic reflection prints. Methods for measuring indoor light stability

GSO ISO 18936:2013 照相材料 彩色照片处理 热稳定性测量方法

This International Standard describes test methods for determining the long-term dark storage stability of colour photographic images. It is applicable to colour photographic images made with traditional photographic materials. These images are generated with chromogenic, silver dye-bleach, dye transfer, dye-diffusion-transfer “instant” systems and similar systems. The test method specified in this International Standard also covers the dark-stability of digital colour images produced with dry- and liquid-toner electrophotography, thermal dye transfer (sometimes called “dye sublimation”), and inkjet printing systems.

Imaging materials -- Processed colour photographs -- Methods for measuring thermal stability

GSO ISO 14807:2013 摄影 -透射和反射测量光强度 -一种确定性能的方法

This International Standard defines a common set of reporting parameters and describes the methods to be used in the determination and presentation of individual densitometer performance and manufacturer-reported performance specifications. This International Standard applies to transmission and reflection densitometers typically manufactured for and used by the photographic, graphic arts and radiographic trades.

Photography -- Transmission and reflection densitometers -- Method for determining performance

GSO ISO 18941:2013 照相材料彩色反射相片臭氧气体稳定性褪色试验方法

This International Standard describes the equipment, methods and procedures for generating a known ozone exposure and the subsequent measurement and quantification of the amount of change produced within both digitally printed hardcopy images and traditional analogue photographic colour print images due to that exposure. The test method described in this International Standard uses increased levels of ozone to achieve an accelerated test. If the principal “gas fading” mechanism for a system is not ozone, this method might not be suitable and might give misleading results as to resistance of the test image to polluted air.

Imaging materials -- Colour reflection prints -- Test method for ozone gas fading stability

GSO ISO 18055-1:2013 摄影和成像 喷墨介质：分类、命名法和尺寸 第1部分：照片级介质（胶片和纸张）

This part of ISO 18055 establishes a classification of photo-grade inkjet papers and films with regard to nomenclature, formats and thickness/grammage. It does not include non-photo-grade media, non-paper/film media, or media intended solely for laser printing.

Photography and imaging -- Inkjet media: Classification, nomenclature and dimensions -- Part 1: Photo-grade media (paper and film)

GSO ISO 18922:2013 照相材料 照相胶片的冲洗 耐划伤性的测定方法

This International Standard is applicable to evaluating the scratch resistance of dry, processed photographic film. It specifies two test methods for evaluating the scratch resistance on either the emulsion or the base side. The two test methods usually give comparable results. It provides empirical laboratory tests made under controlled conditions, but does not necessarily predict the actual scratch resistance of a film in any particular commercial machine. Method A (see Clause 3) gives a measure of the minimum load requirement to produce a scratch, requires less elaborate evaluation equipment and is less stringent in its requirements of the optical condition of the specimens. Method B (see Clause 4) provides a measurement of haze produced by various stylus loads, is a more complete measure of scratch characteristics of a material and is the preferred method.

Imaging materials -- Processed photographic films -- Methods for determining scratch resistance