37.040.25 射线照相胶片 标准查询与下载
共找到 185 条与 射线照相胶片 相关的标准，共 13 页
GB/T 24791的本部分描述了乳腺X射线屏/片/片夹/加工系统的感光特性曲线形状、平均斜率与感光度的测定方法。 片夹可以是任何形式，只要确保屏/片紧密接触，防止胶片被周围光线曝光即可。片夹可以是一种经常在实验中使用的不漏光的真空袋，或者在乳腺X射线照相过程中使用的X射线成像暗盒。
Photography.Sensitometry of screen/film system for medical radiography.Part 3:Determination of sensitometric curve shape,speed and average gradient for mammography
- ICS
- 37.040.25
- CCS
- G80
- 发布
- 2009-12-15
- 实施
- 2010-06-01
GB/T 24791的本部分规定了医疗X射线照相中感光曲线形状、感光度与平均斜率及屏/片/片夹/加工系统的测定方法。本测定方法不适用于如乳腺X射线摄影术、牙科射线摄影术和直接曝光医疗放射照相系统等特殊放射照相。 片夹可以是任何形式，只要确保屏/片紧密接触，防止胶片被周围光线曝光即可。片夹可以是一种经常在试验中使用的不漏光的真空袋，或者在医疗X綫照相过程中使用的X射线成像暗盒。
Photography.Sensitometry of screen/film system for medical X-radiography.Part 1:Determination of sensitometric curce shape ,speed and average gradient
- ICS
- 37.040.25
- CCS
- G80
- 发布
- 2009-12-15
- 实施
- 2010-06-01
本标准规定了银盐(CTP)版的要求、试验方法、检验规则、包装及标志、贮存和运输。 本标准适用于以铝版基为支持体、卤化银为感光层、以绿激光(532nm)或紫激光(405nm、410nm)为曝光光源的银盐版。
Silver halid diffusion CTP plates
- ICS
- 37.040.25
- CCS
- G81
- 发布
- 2009-09-30
- 实施
- 2010-02-01
GB／T l9348本部分的目的是确定胶片系统的性能。 GB／T l9348本部分适用于工业射线照相(无损检测)胶片系统与规定的铅增感屏组合的分类。其目的是为了保证射线照相的影像质量——它受胶片系统的影响——从而与其他国际标准如IS0 5579的要求相符。GB／T l9348本部分不适用于荧光增感胶片的分类。 评定照相处理的方法在GB／T l9348．2《无损检测 工业射线照相胶片 第2部分：用参考值方法控制胶片处理》中有规定，当给出工作条件时，依据GB／T l9348．2能控制胶片系统的性能。
Non-destructive testing-Industrial radiographic films-Part 1:Classification of film systems for industrial radiography
- ICS
- 37.040.25
- CCS
- G81
- 发布
- 2003-10-29
- 实施
- 2004-05-01
GB／T l9348本部分规定了控制胶片处理系统的程序。
Non-destructive testing-Industrial radiographic films-Part 2:Control of film processing by means of reference values
- ICS
- 37.040.25
- CCS
- G81
- 发布
- 2003-10-29
- 实施
- 2004-05-01
Standard Practice for Determining Relative Image Quality Response of Industrial Radiographic Imaging Systems below 4 MeV
- ICS
- 37.040.25
- CCS
- 发布
- 2023-12-01
- 实施
本文件规定了管道焊缝射线底片数字化入库及智能评定的基本规定、技术流程、焊缝底片数字化扫描、焊缝底片数据库、焊缝底片图像预处理、焊缝底片缺陷智能评定及复评、智能识别及复评结果的验证、同口底片识别、焊片信息管理系统、报告编写及成果入库等要求。 本文件适用于射线底片数字化入库及智能评定工作。
Technical specification for digital scanning, identification and archiving of radiographic radiographs of pipe welds
- ICS
- 37.040.25
- CCS
- M731
- 发布
- 2023-11-16
- 实施
- 2023-11-16
Non-destructive testing — Qualification of radiographic film digitisation systems — Part 2: Minimum requirements
- ICS
- 37.040.25
- CCS
- 发布
- 2023-08-21
- 实施
Non-destructive testing — Qualification of radiographic film digitisation systems — Part 1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative
- ICS
- 37.040.25
- CCS
- 发布
- 2023-08-21
- 实施
Medical electrical equipment - Part 2-43: Particular requirements for the basic safety and essential performance of X-ray equipment for interventional procedures
- ICS
- 37.040.25
- CCS
- 发布
- 2022-12-05
- 实施
Medical electrical equipment - Part 2-43: Particular requirements for the basic safety and essential performance of X-ray equipment for interventional procedures
- ICS
- 37.040.25
- CCS
- 发布
- 2022-12-05
- 实施
1.1 This practice covers the fabrication of Sensitivity Indicators (SI), which can be used to determine the relative quality of film radiographic images produced by direct, thermal neutron radiographic examination. 1.2 Units—The values stated in inch-pound units are to be regarded as standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Practice for Fabrication of Neutron Radiographic Sensitivity Indicators
- ICS
- 37.040.25
- CCS
- 发布
- 2022-12-01
- 实施
Medical blue sensitive X-ray film
- ICS
- 37.040.25
- CCS
- G81
- 发布
- 2022-09-30
- 实施
- 2023-04-01
Non-destructive testing — Industrial radiographic films —Part 2: Control of film processing by means of reference values
- ICS
- 37.040.25
- CCS
- 发布
- 2022-08-10
- 实施
Non-destructive testing — Industrial radiographic films —Part 2: Control of film processing by means of reference values
- ICS
- 37.040.25
- CCS
- 发布
- 2022-08-10
- 实施
Non-destructive testing — Industrial radiographic film —Part 1: Classification of film systems for industrial radiography
- ICS
- 37.040.25
- CCS
- 发布
- 2022-08-10
- 实施
Non-destructive testing — Industrial radiographic film —Part 1: Classification of film systems for industrial radiography
- ICS
- 37.040.25
- CCS
- 发布
- 2022-08-10
- 实施
Standard Practice for Fabrication of Neutron Radiographic Sensitivity Indicators
- ICS
- 37.040.25
- CCS
- 发布
- 2021-11-01
- 实施
Methods of evaluating dose equivalent by fast neutron film badges
- ICS
- 37.040.25
- CCS
- 发布
- 20210929
- 实施
- 20210929
1.1 This practice covers the material and fabrication of a Beam Purity Indicator (BPI), which can be used to determine the relative quality of radiographic images produced by direct, thermal neutron radiographic examination. 1.2 Units—The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Practice for Fabrication of the Neutron Radiographic Beam Purity Indicators
- ICS
- 37.040.25
- CCS
- 发布
- 2020-06-01
- 实施
