37.040.99 有关摄影技术的其他标准 标准查询与下载

GSO ISO/TS 22028-4:2015 成像和图形技术 用于存储、流通和交换数字图像的可扩展颜色编码 第4部分：欧洲颜色倡议委员会 (ECI) 的彩色图像编码（红、绿、蓝 (RGB)）

  Scope is not provided for this standard

Photography and graphic technology -- Extended colour encodings for digital image storage, manipulation and interchange -- Part 4: European Colour Initiative RGB colour image encoding [eciRGB (2008)]

GSO ISO/TS 22028-3:2015 摄影和成像技术 用于数字图像存储、处理和交换的可扩展颜色编码 第3部分：彩色图像度量编码的参考输入平均值 (RIMM RGB)

This part of ISO 22028 specifies a family of scene-referred extended colour gamut RGB colour image encodings designated as reference input medium metric RGB (RIMM RGB). Digital images encoded using RIMM RGB can be manipulated, stored, transmitted, displayed or printed by digital still picture imaging systems. Three precision levels are defined using 8-, 12- and 16-bits/channel. An extended luminance dynamic range version of RIMM RGB is also defined, designated as extended reference input medium metric RGB (ERIMM RGB). Two precision levels of ERIMM RGB are defined using 12- and 16-bits/channel. FP-RIMM RGB, a floating point version of RIMM RGB, defines the expression method of RIMM RGB in a floating point figure. Three precision levels of FP-RIMM RGB are defined using 16-, 32- and 64-bits/channel.

Photography and graphic technology -- Extended colour encodings for digital image storage, manipulation and interchange -- Part 3: Reference input medium metric RGB colour image encoding (RIMM RGB)

GSO ISO 22028-2:2015 摄影和图形技术 -用于数字图像存储、处理和交换的可扩展颜色编码 第2部分：参考输出介质的公制RGB颜色图像编码（ROMM RGB）

This part of ISO 22028 defines a family of extended colour-gamut output-referred RGB colour image encodings designated as reference output medium metric RGB (ROMM RGB). Digital images encoded using ROMM RGB can be manipulated, stored, transmitted, displayed, or printed by digital still picture imaging systems. Three precision levels are defined using 8-, 12- and 16-bits/channel.

Photography and graphic technology -- Extended colour encodings for digital image storage, manipulation and interchange -- Part 2: Reference output medium metric RGB colour image encoding (ROMM RGB)

BS ISO 18943:2014 成像材料. 用于图像存储的磁硬盘驱动器. 养护和处理

Imaging materials. Magnetic hard drives used for image storage. Care and handling

GSO ISO 12234-1:2014 电子成像图像 可移动存储器 第1部分：可移动主存储器模型

This part of ISO 12234 specifies a basic removable-memory reference model for digital electronic still-picture cameras. The reference model includes image file formats for storing image data and metadata, file system requirements for storing and retrieving the image files on the removable memory, and media profiles which are specific to a given storage technology. The reference model allows the image data and metadata to be interchanged among the various components of an electronic imaging system by using the removable storage media.

Electronic still-picture imaging -- Removable memory -- Part 1: Basic removable-memory model

GSO ISO 12234-2:2014 摄影 电子图像 可移动存储器 第2部分：TIFF/EP 图像数据格式

This part of ISO 12234 specifies the TIFF/EP data format described in ISO 12234-1.

Electronic still-picture imaging -- Removable memory -- Part 2: TIFF/EP image data format

ISO 18943:2014 成像材料. 用于图像存储的磁硬盘驱动器. 养护和处理

Imaging materials - Magnetic hard drives used for image storage - Care and handling

JB/T 9430-2014 36mm×24mm幻灯放映画面检验版

本标准规定了36 mm×24 mm幻灯放映画面检验版(以下简称检验版)的型式与尺寸、技术要求、试验方法、检验规则以及标志、包装、运输和贮存。本标准适用于放映画幅尺寸为36 mm×24 mm的幻灯机检验、鉴定、调整用的放映画面检验版。

36 mm×24 mm test target for slide projector

JB/T 9431-2014 250mm×250mm透射式投影画面检验版

本标准规定了250 mm×250 mm透射式投影画面检验版(以下简称检验版)的型式与尺寸、技术要求、试验方法、检验规则以及标志、包装、运输和贮存。本标准适用于工作台面为250 mm×250 mm的透射式投影器的检验、鉴定、调整用的画面检验版。

250 mm×250 mm test target for overhead projector

JB/T 11853-2014 透射式投影器 可靠性要求及试验方法

本标准规定了透射式投影器(以下简称投影器)的术语和定义、可靠性要求、试验方法、可靠性特征量的估计方法及试验记录和报告。本标准适用于批试阶段或批量生产的A型(250 mm×250 mm)和B型(285 mm×285 mm)投影器的可靠性鉴定试验和验收试验,非A型和B型投影器也可参照使用。

Reliability requirements and test methods of overhead projectors

JB/T 5381-2014 透射式投影器 画面畸变测试版技术条件

本标准规定了透射式投影器画面畸变测试版(以下简称测试版)的技术要求、试验方法以及标志、包装、运输和贮存。本标准规定的画面畸变测试版适用于GB/T 27509-2011规定的A型(250 mm×250 mm)和B型(285 mm×285 mm)透射式投影器。本标准不适用于非透射式投影器画面崎变的测试。

Technical specifications of screen distortion test target for overhead projectors

GSO ISO 18923:2013 成像材料聚酯磁带基储存规范

This International Standard provides recommendations concerning the storage conditions, storage facilities, enclosures, and inspection for recorded polyester-base magnetic tapes in roll form. It covers analog and digital tape and includes tape made for audio, video, instrumentation and computer use. This International Standard is applicable to medium-term and extended-term storage of magnetic tape as defined in 3.18 and 3.7 and also is applicable to magnetic-tape records intended as master tapes, which should not be in frequent use. Deviations from these recommendations, whether before or after recording, may result in shortened life expectancy. For example, adverse conditions during shipment, handling, or usage. This International Standard is not applicable to "work" or "use" copies (see informative annex C).

Imaging materials -- Polyester-base magnetic tape -- Storage practices

GSO ISO 18932:2013 成像材料 粘合剂安装系统 规格

This International Standard provides specifications for adhesive mounting materials for use in attaching prints, including photographic, electrophotographic, electrostatic, thermal transfer or inkjet prints to mounting boards, album leaves, file cards and other supports. This International Standard covers both pressure-sensitive and thermally-activated adhesives. Spray adhesives are specifically excluded from this International Standard. This International Standard is not applicable to situations in which the permanent mounting of a photograph is not recommended.

Imaging materials -- Adhesive mounting systems -- Specifications

GSO ISO 18934:2013 摄影资料 多媒体归档 存储环境

This International Standard provides suggested guidelines for four temperature and humidity macro-environments for archives that contain a variety of recording media, based on the corresponding ISO storage standards for those media. Whenever possible, this International Standard recommends that users follow the storage environments in the ISO storage standards. This International Standard does not replace those ISO storage standards. In addition to environment recommendations, those standards also include other vital information pertinent to the long-term keeping of recording materials, such as inspection, housing, and handling guidelines. Although microenvironments within a storage enclosure can be dependent upon the macro-environment, they are not the focus of this International Standard. The storage of traditional paper collections is not within the scope of this International Standard. However, many archives containing mixed recording media also include such collections. Archivists are encouraged to review the appropriate standards (see References [1] and [2]) for those materials. Nitrate-base photographic films are also included in this International Standard, since they are often stored together with other materials. NOTE Nitrate-base films represent a fire hazard and need to be stored in accordance with the National Fire Protection Association standard[3] in the United States, or other applicable national standards. Moreover, fumes from decomposing nitrate film and acetate-base film can have detrimental effects on other materials stored in the same area[11]. A solution to this problem is to isolate such films in a separate storage area. This International Standard does not address the various strategies to upgrade substandard environments that deviate from those recommended by ISO standards.

Imaging materials -- Multiple media archives -- Storage environment

GSO ISO 15740:2013 摄影 静态图像的电子摄影 数字成像设备的图片传输协议 (PTP)

This International Standard provides a common communication protocol for exchanging images with and between digital still photography devices (DSPDs). This includes communication between DSPDs and host computers, printers, other digital still devices, telecommunications kiosks and image storage and display devices. This protocol is transport- and platform-independent.

Photography -- Electronic still picture imaging -- Picture transfer protocol (PTP) for digital still photography devices

GSO ISO 18930:2013 成像材料 彩色反射印刷品 室外条件下图像稳定性评价方法

This International Standard describes test equipment and test procedures for determining the colour stability of photographic colour images when subjected to outdoor conditions. It does not specify limits of acceptability or failure criteria. Instead, it provides means for measuring image changes that take place during the aging of pictorial photographic images and indicates the critical image-change parameters that should be reported. Users of this International Standard should determine which test end-points best simulate the intended display application. This International Standard is applicable to pictorial images made with digital printing media, for example: — prints on coated papers, coated and uncoated clear and opaque films, vinyl, polyester, synthetic papers and other plastic substrates, laminated and not laminated; — dye-based and pigment-based inkjet prints with aqueous, solvent, phase-change, or UV curing inks; — thermal dye and mass transfer; — dye sublimation prints; — digitally-printed dye-diffusion-transfer prints; — liquid- and dry-toner xerographic prints; — liquid toner electrostatic prints; — digitally printed images made with traditional chromogenic and silver dye-bleach photographic materials; — colour direct thermal prints. In these digital printing processes, the ink laydown is controlled by means of digital pixel information, and all of the settings and controls of the printing system can be documented and repeated. In contrast, for many analogue printing systems, the control over the ink film thickness can be subject to manual adjustment. Window graphics on the outside of windows are covered by this International Standard. Window graphics on the inside of windows, for which sunlight is filtered by a layer of glass, will be covered by ISO 18937. This International Standard does not include test procedures for physical stability of images, supports or binder materials. However, it is recognized that in some instances physical degradation such as support embrittlement, image layer cracking, or delamination of an image layer from its support, rather than image stability, will determine the useful life of a print material. NOTE Image print stability results determined for one printer model, ink set, printing mode, print resolution and media combination are not applicable to image prints produced through another printer model, ink set, printing mode, print resolution and media combination, even if the ink jet cartridges and/or media used in testing are the same.

Imaging materials -- Pictorial colour reflection prints -- Methods for evaluating image stability under outdoor conditions

GSO ISO 15739:2013 摄影 电子静态图片成像 噪声测量

This International Standard specifies methods for measuring and reporting the noise versus signal level and dynamic range of digital still cameras. It applies to both monochrome and colour electronic digital still cameras

Photography -- Electronic still-picture imaging -- Noise measurements

BS ISO 15740:2013 摄影. 电子静物图象成像. 数字静物摄影设备的图象传送协议(PTP)

Photography. Electronic still picture imaging. Picture transfer protocol (PTP) for digital still photography devices

GSO ISO 18916:2013 照相材料 制造材料的照相 容器材料的照相活性测试

This International Standard specifies the procedure for the photographic activity and dye coupler reactivity tests. This International Standard is applicable to general photographic enclosure materials such as paper, tissue, cardboard, mat board and plastics. It is also applicable to components of photographic enclosure materials such as adhesives, inks, paints, labels, and tape. This International Standard evaluates possible chemical interactions between enclosures with processed silver-gelatin, colour (dye-gelatin), inkjet prints made with dye-based and pigment-based inks, thermal dye diffusion transfer (“dye sub”) prints, digitally printed dye-diffusion-transfer prints, liquid- and dry-toner xerographic prints, liquid-toner electrostatic prints, and diazo images after long-term storage. It does not pertain to harmful physical interactions such as blocking (sticking together), dye bleed, adhesive migration, or plasticizer exudation. It does not pertain to important criteria of enclosures such as their inherent chemical stability, physical integrity, and workmanship. Passing the photographic activity test (PAT) does not indicate that a material is archival. This term has no clear definition and is not used in this standard. Photo-safe, storage enclosures and their components are covered in ISO 18902, which includes passing the criteria of the photographic activity test. If a particular brand of commercially made enclosure materials is found to be safe for long-term storage purposes, there is no assurance that subsequent batches will contain the same ingredients of the same purity, chemical inertness, concentrations, or sound and sturdy construction. For this reason, materials are tested annually or upon each formulation or supplier change. For materials which are manufactured in a variety of colours, such as papers and inks, each colour is evaluated and reported separately. For enclosures intended for use with any of the above imaging processes, only the black-and-white PAT described in Clauses 4 to 7 are applicable. The dye coupler reactivity test is optional as the results are valid only for the specific colour print product being investigated. Different colour print products can have different staining sensitivities. For enclosures intended for use with diazo images, only the diazo PAT described in 8.5 is applicable

Imaging materials -- Processed imaging materials -- Photographic activity test for enclosure materials

GSO ISO 22028-1:2013 摄影和图形技术 用于数字图像存储、操作和交换的可扩展颜色编码 第1部分：体系结构和要求

ISO 22028-1:2004 specifies a set of requirements to be met by any extended-gamut colour encoding that is to be used for digital photography and/or graphic technology applications involving digital image storage, manipulation and/or interchange. ISO 22028-1:2004 is applicable to pictorial digital images that originate from an original scene, as well as digital images with content such as text, line art, vector graphics and other forms of original artwork. ISO 22028-1:2004 also describes a reference image-state-based digital imaging architecture, encompassing many common workflows, that can be used to classify extended colour encodings into a number of different image states. However, ISO 22028-1:2004 does not specify any particular workflow(s) that are to be used for digital photography and/or graphic technology applications

Photography and graphic technology -- Extended colour encodings for digital image storage, manipulation and interchange -- Part 1: Architecture and requirements