37.040.99 有关摄影技术的其他标准 标准查询与下载

ISO 15740:2013 摄影. 电子静像成像. 用于数码摄影设备的图像传输协议 (PTP)

This International Standard provides a common communication protocol for exchanging images with and between digital still photography devices (DSPDs). This includes communication between DSPDs and host computers, printers, other digital still devices, telecommunications kiosks and image storage and display devices. This protocol is transport-and platform-independent.

Photography.Electronic still picture imaging.Picture transfer protocol (PTP) for digital still photography devices

DS/ISO 15739:2013 摄影 电子静态图片成像 噪声测量

This International Standard specifies methods for measuring and reporting the noise versus signal level and dynamic range of digital still cameras. It applies to both monochrome and colour electronic digital still cameras.

Photography - Electronic still-picture imaging - Noise measurements

DS/ISO 12234-1:2012 电子静止图像成像 可移动存储器 第1部分：基本可移动存储器模型

This part of ISO 12234 specifies a basic removable-memory reference model for digital electronic still-picture cameras. The reference model includes image file formats for storing image data and metadata, file system requirements for storing and retrievin

Electronic still-picture imaging - Removable memory - Part 1: Basic removable-memory model

BS ISO 12234-1:2012 电子静止图像影像.移动存储.基本移动式存储模型

Electronic still-picture imaging. Removable memory. Basic removable-memory model

DB35/T 1275-2012 数码相框技术要求和测试方法

本标准规定了数码相框的术语和定义、技术要求及试验方法。 本标准适用于数码相框（以下简称产品）的设计、生产和检验等。

Digital photo frame technical requirements and test methods

ISO 12234-1:2012 电子静止图像影像.移动存储.第1部分:基本移动式存储模型

This part of ISO 12234 specifies a basic removable-memory reference model for digital electronic still-picture cameras. The reference model includes image file formats for storing image data and metadata, file system requirements for storing and retrieving the image files on the removable memory, and media profiles which are specific to a given storage technology. The reference model allows the image data and metadata to be interchanged among the various components of an electronic imaging system by using the removable storage media.

Electronic still-picture imaging - Removable memory - Part 1: Basic removable-memory model

DS/ISO 18930:2012 成像材料 彩色反射印刷品 在室外条件下评价图像稳定性的方法

This International Standard describes test equipment and test procedures for determining the colour stabilityof photographic colour images when subjected to outdoor conditions. It does not specify limits of acceptabilityor failure criteria. Instead, it provides means for measuring image changes that take place during the aging ofpictorial photographic images and indicates the critical image-change parameters that should be reported. Theuser of this standard shall determine which test end points best simulate the intended display application.This International Standard is applicable to pictorial images made with digital printing media, for example:prints on

Imaging materials - Pictorial colour reflection prints - Methods for evaluating image stability under outdoor conditions

KS A ISO 18932-2011(2021) 成像材料胶粘剂安装系统规范

Imaging materials－Adhesive mounting systems－Specifications

KS A ISO 18932-2011(2016) 成像材料胶粘剂安装系统规范

Imaging materials－Adhesive mounting systems－Specifications

KS A ISO 18932:2011 成像材料.黏着固定法.细节规范

이 표준은 사진, 전기진단사진, 정전기사진, 열 전사사진, 잉크젯 방식 사진과 같은 인화물

Imaging materials－Adhesive mounting systems－Specifications

KS A ISO 12234-1:2011 电子式静止影像图像.移动式记忆装置.第1部分:基本移动式存储模块

이 표준에서는 전자식 정지 영상 카메라에서 데이터를 저장하기 위한 기본적인 이동식 메모리의

Electronic still-picture imaging-Removable memory-Part 1:Basic removable-memory model

BS ISO 18930:2011 成像材料.图案颜色反射印品.室外条件下评估影像稳定性的方法

Imaging materials. Pictorial colour reflection prints. Methods for evaluating image stability under outdoor conditions

BS ISO 18934:2011 成像材料.多媒体档案.储存环境

Imaging materials. Multiple media archives. Storage environment

ISO 18930:2011 成像材料.插图彩色映像打印.室外条件下图像稳定性评估法

This International Standard describes test equipment and test procedures for determining the colour stability of photographic colour images when subjected to outdoor conditions. It does not specify limits of acceptability or failure criteria. Instead, it provides means for measuring image changes that take place during the aging of pictorial photographic images and indicates the critical image-change parameters that should be reported. Users of this International Standard should determine which test end-points best simulate the intended display application. This International Standard is applicable to pictorial images made with digital printing media, for example: — prints on coated papers, coated and uncoated clear and opaque films, vinyl, polyester, synthetic papers and other plastic substrates, laminated and not laminated; — dye-based and pigment-based inkjet prints with aqueous, solvent, phase-change, or UV curing inks; — thermal dye and mass transfer; — dye sublimation prints; — digitally-printed dye-diffusion-transfer prints; — liquid- and dry-toner xerographic prints; — liquid toner electrostatic prints; — digitally printed images made with traditional chromogenic and silver dye-bleach photographic materials; — colour direct thermal prints. In these digital printing processes, the ink laydown is controlled by means of digital pixel information, and all of the settings and controls of the printing system can be documented and repeated. In contrast, for many analogue printing systems, the control over the ink film thickness can be subject to manual adjustment. Window graphics on the outside of windows are covered by this International Standard. Window graphics on the inside of windows, for which sunlight is filtered by a layer of glass, will be covered by ISO 18937. This International Standard does not include test procedures for physical stability of images, supports or binder materials. However, it is recognized that in some instances physical degradation such as support embrittlement, image layer cracking, or delamination of an image layer from its support, rather than image stability, will determine the useful life of a print material. NOTE Image print stability results determined for one printer model, ink set, printing mode, print resolution and media combination are not applicable to image prints produced through another printer model, ink set, printing mode, print resolution and media combination, even if the ink jet cartridges and/or media used in testing are the same.

Imaging materials - Pictorial colour reflection prints - Methods for evaluating image stability under outdoor conditions

ISO 18934:2011 成像材料.多媒体档案.保存环境

Imaging materials - Multiple media archives - Storage environment

DIN ISO 18902:2010 成像材料.已加工的成像材料.相册、框架和存储材料(ISO 18902-2007 +勘误表1-2009)

Imaging materials - Processed imaging materials - Albums, framing and storage materials (ISO 18902:2007 + Cor. 1:2009)

DS/ISO 18932:2009 成像材料 粘合剂安装系统 规范

This International Standard provides specifications for adhesive mounting materials for use in attaching prints, including photographic, electrophotographic, electrostatic, thermal transfer or inkjet prints to mounting boards, album leaves, file cards and other supports. This International Standard covers both pressure-sensitive and thermally-activated adhesives. Spray adhesives are specifically excluded from this International Standard.This International Standard is not applicable to situations in which the permanent mounting of a photograph is not recommended.

Imaging materials - Adhesive mounting systems - Specifications

LST ISO 12234-2:2008 电子静态图片成像 可移动存储器 第2部分：TIFF/EP 图像数据格式（ISO 12234-2:2001，相同）

Electronic still-picture imaging - Removable memory - Part 2: TIFF/EP image data format (ISO 12234-2:2001, identical)

DS/ISO 18916:2008 成像材料 加工成像材料 外壳材料的照相活性试验

This International Standard specifies the procedure for the photographic activity and dye coupler reactivity tests.This International Standard is applicable to general photographic enclosure materials such as paper, tissue, cardboard, mat board and plastics. It is also applicable to components of photographic enclosure materials such as adhesives, inks, paints, labels, and tape.This International Standard evaluates possible chemical interactions between enclosures with processed silver-gelatin, colour (dye-gelatin), inkjet prints made with dye-based and pigment-based inks, thermal dye diffusion transfer (“dye sub”) prints, digitally printed dye-diffusion-tr

Imaging materials - Processed imaging materials - Photographic activity test for enclosure materials

DB62/T 1738-2008 甘肃省摄影企业等级划分

Classification of Photography Enterprises in Gansu Province