37.100.01 标准查询与下载
共找到 593 条与 相关的标准，共 40 页
ISO 14861:2015 specifies requirements for systems that are used to produce, from digital data, images on electronic displays that are intended to simulate a characterized printing condition defined by a set of characterization data and spot colours defined by a physical reference. Recommendations are provided with regard to equipment selection, setup, operating, and environmental conditions. Appropriate test methods associated with these requirements are specified.
Graphic technology — Requirements for colour soft proofing systems
- ICS
- 37.100.01
- CCS
- 发布
- 2021-07-01
- 实施
ISO 20654:2017 defines a metric for assessing intermediate tones of a spot ink. This method for the calculation of Spot Colour Tone Value (SCTV) produces approximately uniform visual spacing of tones between substrate and solid. It can be calculated from spectral reflectance or colorimetric measurements of the solid ink, substrate and one or more patches of intermediate tones to be measured.
Graphic technology — Measurement and calculation of spot colour tone value
- ICS
- 37.100.01
- CCS
- 发布
- 2021-07-01
- 实施
ISO 16763:2016 specifies quality requirements and tolerances of bound products and intermediate components. It is applicable to products requiring industrial binding, for example, books, magazines, catalogues and brochures.
Graphic technology — Post-press — Requirements for bound products
- ICS
- 37.100.01
- CCS
- 发布
- 2021-07-01
- 实施
ISO 16762:2016 specifies the requirements for the handling, storage and transfer of printed products between printing and post-press. It also identifies information that may be necessary for successful completion of post-press operations (job ticket). In addition, the handling of materials used within the post-press operation is specified.
Graphic technology — Post-press — General requirements for transfer, handling and storage
- ICS
- 37.100.01
- CCS
- 发布
- 2021-07-01
- 实施
ISO/TS 15311-1:2016 defines print metrics, measurement methods and reporting requirements for printed sheets that are suitable for all classes of printed products. Guidance as to which of these metrics to apply to any given category of product along with acceptable conformance criteria is provided in subsequent parts of ISO/TS 15311. Although ISO/TS 15311-1:2016 is expected to be used primarily to measure prints from digital printing systems, the metrics are general and can be applied to other kinds of print.
Graphic technology — Requirements for printed matter for commercial and industrial production — Part 1: Measurement methods and reporting schema
- ICS
- 37.100.01
- CCS
- 发布
- 2021-07-01
- 实施
ISO 18620:2016 specifies a simple extensible format for the exchange of tone adjustment curves between applications including but not limited to colour management, calibration and raster image processor systems.
Graphic technology — Prepress data exchange — Tone adjustment curves exchange
- ICS
- 37.100.01
- CCS
- 发布
- 2021-07-01
- 实施
薄膜水性油墨凹版印刷技术要求 1 范围本文件规定了薄膜水性油墨凹版印刷的术语和定义、过程控制要求、印品质量要求和检验方法。 本文件适用于薄膜水性油墨凹版印刷的生产、工艺过程控制和产品质量检验。 2 规范性引用文件 下列文件中的内容通过文中的规范性引用而构成本文件必不可少的条款。其中，注日期的引用文件， 仅该日期对应的版本适用于本文件；不注日期的引用文件，其最新版本（包括所有的修改单）适用于本 文件。GB 19298 食品安全国家标准 包装饮用水 GB 31640 食品安全国家标准 食用酒精 GB 38507—2020 油墨中可挥发性有机化合物（VOCs）含量的限值 GB/T 7707—2008 凹版装潢印刷品 GB/T 13217.4—2020 油墨黏度检验方法 GB/T 26394 水性薄膜凹印复合油墨 GB/T 28383 卷筒料凹版印刷机 GB/T 36059—2018 纸包装凹版印刷过程 质量控制及检验方法 GB/T 36064—2018 塑料软包装凹版印刷过程质量控制及检验方法 GB/T 38608—2020 油墨中可挥发性有机化合物（VOCs）含量的测定方法 CY/T 9 电子雕刻凹版技术要求及检验方法 CY/T 132.2—2017 绿色印刷 产品合格判定准则 第 2 部分：包装类印刷品 HJ 371—2018 环境标志产品技术要求 凹印油墨和柔性油墨 JJG 119—2018 实验室 pH（酸度）计 QB/T 4103 水性凹版塑料薄膜表印油墨 3 术语和定义 下列术语和定义适用于本文件。
Thin film water-based ink gravure printing technical requirements
- ICS
- 37.100.01
- CCS
- C231
- 发布
- 2021-06-15
- 实施
- 2021-06-18
Graphic technology – Process control for the production of half-tone colour separations, proofs and production prints – Part 6: Flexographic printing
- ICS
- 37.100.01
- CCS
- 发布
- 2021-06-04
- 实施
- 2021-06-04
Graphic technology – Process control for the production of half-tone colour separations, proof and production prints – Part 8: Validation print processes working directly from digital data
- ICS
- 37.100.01
- CCS
- 发布
- 2021-06-04
- 实施
- 2021-06-04
This document specifies requirements for systems that are used to produce offset prints for process colour reproduction on metallic substrates, which have been printed with a white coating. It is intended for flat printed sheet metal applications. It does not cover shaped or pre-formed metal such as preformed cans. Recommendations are provided with regard to appropriate test methods associated with these requirements. This document differs from the method used to produce an offset print on paper or board in ISO 12647-2 in that it considers the colour values of a typical white coated metal substrate intended for metal decoration, using offset lithography and substrates that are independent of backing colour.
Graphic technology - Process control for the production of half-tone colour separations, proof and production prints - Part 9: Metal decoration printing processes using offset lithography
- ICS
- 37.100.01
- CCS
- 发布
- 2021-06-00
- 实施
This document specifies requirements that can be used for determining the conformance of systems that produce a hard-copy validation print, directly from digital data, which is intended to simulate the expected appearance of material printed in accordance with a characterized printing condition. It is not intended for use in determining the conformance of production printing systems (digital or conventional) since many aspects of production printing are not covered in this document.
Graphic technology - Process control for the production of half-tone colour separations, proof and production prints - Part 8: Validation print processes working directly from digital data
- ICS
- 37.100.01
- CCS
- 发布
- 2021-05-00
- 实施
Water Norms Part 1: Agriculture
- ICS
- 37.100.01
- CCS
- P 40
- 发布
- 2021-03-06
- 实施
- 2021-06-06
Water Ratings Part 2: Industry
- ICS
- 37.100.01
- CCS
- P 40
- 发布
- 2021-03-06
- 实施
- 2021-06-06
Water Ratings Part 3: Living
- ICS
- 37.100.01
- CCS
- P 40
- 发布
- 2021-03-06
- 实施
- 2021-06-06
BS ISO 14298. Graphic technology. Management of security printing processes
- ICS
- 37.100.01
- CCS
- 发布
- 2021-01-15
- 实施
- 2021-01-15
本标准规定了金银卡纸UV胶印产品油墨、外观、爆线、墨层耐磨性?、模切尺寸误差?、图像定位允差（套印误差）、实地颜色 、阶调值复制范围、阶调值增加与扩展（网点印刷要求）、阶调值和中间调扩展允差、符合性等内容的技术要求以及相应的检验方法。
Quality and test method for the UV offset prints on gold/silver foil paper/card
- ICS
- 37.100.01
- CCS
- C231
- 发布
- 2020-12-28
- 实施
- 2020-12-28
Graphic technology. Requirements for printed matter for commercial and industrial production. Measurement methods and reporting schema
- ICS
- 37.100.01
- CCS
- 发布
- 2020-12-09
- 实施
- 2020-12-09
Graphic technology - Requirements for printed matter for commercial and industrial production - Part 1: Measurement methods and reporting schema
- ICS
- 37.100.01
- CCS
- A17
- 发布
- 2020-12-00
- 实施
Process control requirements and inspection methods for precision coating of roll plastic film
- ICS
- 37.100.01
- CCS
- A 17
- 发布
- 2020-11-16
- 实施
- 2021-02-01
Sheet-fed offset printing machine maintenance procedures
- ICS
- 37.100.01
- CCS
- A 17
- 发布
- 2020-11-16
- 实施
- 2021-02-01
