39.040.10 手表 标准查询与下载
共找到 355 条与 手表 相关的标准，共 24 页
本标准规定了手表用金属带扣(以下简称“带扣”)的术语和定义、分类、要求、试验方法、检验规则及标志、包装、运输、贮存。本标准适用于金属材料制造的各类手表带扣,其他材料制造的带扣亦可参照使用。
Metal buckle for wristwatches
- ICS
- 39.040.10
- CCS
- Y11
- 发布
- 2013-10-17
- 实施
- 2014-03-01
ISO 23160:2011 specifies tests for the evaluation of the resistance of watch cases and their bracelets to wear, scratching and impacts occurring when wearing the watch. ISO 23160:2011 is applicable mainly to complete watch cases fitted with bracelets. However, certain tests can be applied to the watch case only, to the complete or partial bracelet, or to specially prepared samples.
Watch cases and accessories -- Tests of the resistance to wear, scratching and impacts
- ICS
- 39.040.10
- CCS
- 发布
- 2013-04-01
- 实施
This International Standard specifies overall fixing dimensions of wristwatch-cases to which bracelets or straps are fastened by means of a set of fixing pins and tubes. This International Standard is applicable to wristwatch-cases with four or with two lugs.
Timekeeping instruments-Wristwatch - cases – Fixing dimensions of non -spring-bar types
- ICS
- 39.040.10
- CCS
- 发布
- 2013-04-01
- 实施
This Standard specifies the classification and water resistibility of water resistant watches for general use (hereafter referred to as "water-resistant watches"). This Standard does not apply to water resistant watches for special use such as diving.
Water resistant watches for general use.Classification and water resistibility
- ICS
- 39.040.10
- CCS
- Y11
- 发布
- 2013-03-21
- 实施
Watchmaking - Practical method of quality control of jeweled anchor watches
- ICS
- 39.040.10
- CCS
- Y11
- 发布
- 2013-01-05
- 实施
- 2013-01-05
本标准规定了液晶式电波手表（以下简称“手表”）的产品分类、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于具有石英谐振器、能接收无线长波时码信号以校准时间、标称工作电压为DC3.00V、具有时、分、秒显示的液晶式手表，手表机心、具有相同功能的其他计时器可参照使用。
Radio-controlled liquid crystal displaying quartz watches
- ICS
- 39.040.10
- CCS
- Y11
- 发布
- 2012-11-07
- 实施
- 2013-03-01
本标准规定了陀飞轮手表（以下简称“手表”）的定义、产品分类、要求、试验方法、检验规则及标志、包装、运输、贮存。 本标准适用于陀飞轮手表及其机心。
Tourbillon watches
- ICS
- 39.040.10
- CCS
- Y11
- 发布
- 2012-11-07
- 实施
- 2013-03-01
本标准规定了指针、液晶数字式石英手表（以下简称“手表”）的产品分类、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于具有石英谐振器、标称工作电压为DC 1.50V或DC 3.00V的以指针和液晶两种方式指示时间的石英手表，具有相同功能的其他计时器可参照使用。
Analogue and liquid crystal digital quartz watches
- ICS
- 39.040.10
- CCS
- Y11
- 发布
- 2012-11-07
- 实施
- 2013-03-01
本标准规定了指针式电波手表（以下简称“手表”）的产品分类、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于具有石英谐振器、能接收无线长波时码信号以校准指示时间、标称工作电压为DC3.00V的指针式手表。手表机心、使用该类机心的其它计时仪器及标称工作电压为DC1.50V的指针式电波手表可参照使用。
Radio-controlled analogue quartz watches
- ICS
- 39.040.10
- CCS
- Y11
- 发布
- 2012-11-07
- 实施
- 2013-03-01
本标准规定了指针式石英表用线路板组件（以下简称“线路板”）的要求、试验方法、检验规则、标志、包装、运输、贮存。 本标准适用于具有石英谐振器、标称工作电压为DC 1.5V的指针式手表及具有石英谐振器的不戴在手上、指示时刻的指针式表类线路板。
Printed circuit board component for analogue quartz watches
- ICS
- 39.040.10
- CCS
- Y11
- 发布
- 2012-11-07
- 实施
- 2013-03-01
本标准规定了指针式石英表用单相永磁步进电动机（以下简称“电机”）的技术要求和试验方法。 本标准适用于指针式石英表（以下简称“手表”）用单相永磁步进电动机。
Technical specifications and test methods of single-phase permanent magnet stepper motors for analogue quartz watches
- ICS
- 39.040.10
- CCS
- Y11
- 发布
- 2012-11-07
- 实施
- 2013-03-01
This Standard specifies the classification and performance requirements of watches that are designed to withstand a magnetic field (hereafter referred to as “magnetic resistant watches”).
Horology -- Magnetic resistant watches -- Classification and performance
- ICS
- 39.040.10
- CCS
- Y11
- 发布
- 2012-03-21
- 实施
Watch cases and accessories. Tests of the resistance to wear, scratching and impacts
- ICS
- 39.040.10
- CCS
- Y11
- 发布
- 2011-07-31
- 实施
- 2011-07-31
1 Scope This International Standard establishes the requirements and specifies the test methods used to verify the water resistance of watches. Moreover, it indicates the marking which the manufacturer is authorized to apply to them. Divers' watches, specified as such, are covered by ISO 6425 which establishes special requirements.
Horology. Water-resistant watches
- ICS
- 39.040.10
- CCS
- 发布
- 2011-06-30
- 实施
- 2011-06-30
Horology. Water-resistant watches
- ICS
- 39.040.10
- CCS
- Y11
- 发布
- 2011-06-30
- 实施
- 2011-06-30
This International Standard specifies tests for the evaluation of the resistance of watch cases and their WwWristlets to wear, scratching and impacts occurring when wearing the watch. This International Standard is applicable mainly to complete watch cases fitted with wristlets. However, certain tests can be applied to the watch case only, to the complete or partial WwWristlet，or to specially prepared Samples. NOTE In order to simulate the state of degradation of a worn watch, it is possible to combine all tests described in this International Standard, by agreement between the contracting parties.
Watch cases and accessories - Tests of the resistance to wear, scratching and impacts
- ICS
- 39.040.10
- CCS
- Y11
- 发布
- 2011-06
- 实施
本标准规定了使用宝石和贵金属的手表的要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于具有下列条件之一的机械手表或指针式石英手表。 ——外观件镶嵌宝石； ——表盘面粘接宝石； ——外观件全部或部分使用纯度千分数不低于本标准规定的贵金属及其合金。 怀表、使用非功能宝石和贵金属及其合金材料的机芯亦可参照使用。
Watches with jewels and precious metal alloys
- ICS
- 39.040.10
- CCS
- Y11
- 发布
- 2011-05-18
- 实施
- 2011-08-01
本标准规定了手表用碳化物金属陶瓷表壳体及表带的技术要求、试验方法、检验规则及包装、标志、运输、贮存。 本标准适用于以碳化钨（WC）或碳化钛（TiC）为主要成分的碳化物金属陶瓷材料制造的表壳体及表带，其它成分的碳化物金属陶瓷材料制造的表壳体及表带亦可参照使用。
Cermet casings of watches.Part 2: Carbide cermet casings
- ICS
- 39.040.10
- CCS
- Y11
- 发布
- 2011-05-18
- 实施
- 2011-08-01
本标准规定了钟表宝石元件的分类、要求、试验方法、检验规则及标志、包装。 本标准适用于安装在钟表机心上的钟表功能宝石元件，也适用于安装在仪表及各种装置上的功能宝石元件。
Horological jewel
- ICS
- 39.040.10
- CCS
- Y11
- 发布
- 2010-12-29
- 实施
- 2011-04-01
Watchmaking - Connection dimensions of the pushers with the box
- ICS
- 39.040.10
- CCS
- Y11
- 发布
- 2010-11-01
- 实施
- 2010-11-20
