398 标准查询与下载

DS 717:1985 塑料花盆

Denne standard fastlægger dimensioner og krav til urtepotter af plast.

Flower pots of plastic

DS/ISO 7965/1:1985 包装.包装袋.坠落试验.第1部分:纸袋

This part of ISO 7965 specifies a method of vertical impact testing on a filled paper sack by dropping. It may be performed either as a single test to investigate the effects of vertical impact or as part of a sequence of tests designed to measure the ability of a sack to withstand a distribution system that includes a vertical impact hazard. This part of ISO 7965 specifies the testing procedure and how the results of tests should be presented. It is based on ISO 2248, but is specifically related to paper sacks.

Packaging. Sacks. Drop test. Part 1: Paper sacks

DS/ISO 3394:1985 刚性的矩形包装件尺寸.运输包装

This International Standard sets fortn a series of dimensions for rigid rectangular transport packages, based on the standard plan dimension (module) of 600 mm x 400 mm (23.62 in x 15.75 in).

Dimensions of rigid rectangular packages. Transport packages

DS/ISO 1361:1984 薄金属容器.开顶式二重卷边罐圆形罐头.内径

This International Standard establishes a list of recommended diameters for round steel plate and aluminium cans for food and drinks, double-seamed after filling. Standard diameters of cans for carbonated drinks and certain other specific products are indicated in the appropriate parts of ISO 3004.

Light gauge metal containers. Open-top cans. Round cans. Internal diameters

DS/ISO 6599/1:1984 包装.包装袋.试验的环境调节.第1部分:纸袋

This part of ISO 6599 specifies the conditioning atmospheres and the method for conditioning samples of intact, empty paper sacks before and during testing. If only conventional paper tests are to be carried out on the material of a sack, samples of this material shall be cut out and conditioned as specified in ISO 187.

Packaging. Sacks. Conditioning for testing. Part 1: Paper sacks

DS/ISO 7023:1984 包装.包装袋.试验用取样法

This International Standard specifies a method of obtaining a representative sample of empty sacks for testing. This International Standard is applicable when sampling in order to assess the average quality of a consignment of empty sacks. The method is not suited to sampling for production control. The method applies to all types of empty sacks. NOTE — It should be noted that the sample is representative only of those sacks available for sampling. Considerable caution should be exercised when extrapolating the results from such sampling to a larger consignment.

Packaging. Sacks. Method of sampling empty sacks for testing

DS/ISO 4180/1:1982 满装的运输包装.性能试验计划编制的一般规则.第1部分:一般原则

This International Standard establishes general rules to be used for the compilation of performance test Schedules for complete, filled transport packages intended for use within any distribution system, whether transported by road, rail, sea, air or inland waterway, or by a combination of these modes of transport. This part states the general principles entailed in compiling test schedules. It also gives the factors to be considered in assessing the criteria of acceptance of such packages after they have been subjected to a package performance test schedule. ISO 4180/2 incorporates all the quantitative data necessary to establish test intensities and other quantitative features of test Schedules. The two parts are intended to be read in conjunction with one another.

Complete, filled transport packages. General rules for the compilation of performance test schedules. Part 1: General principles

DS/ISO 4180/2:1982 满装的运输包装.性能试验计划表编制的一般规则.第2部分:定量的数据

This International Standard establishes general rules to be used for the compilation of performance test Schedules for com-plete, filled transport packages intended for use within any distribution system, whether transported by road, rail, sea, air or inland waterway, or by a combination of these modes of transport. ISO 4180/1 states the general principles entailed in compiling test Schedules. It also gives the factors to be considered in assessing the criteria of acceptance of such packages after they have been subjected to a package performance test schedule. This part incorporates all the quantitative data necessary to establish test intensities and other quantitative features of test schedules. The two parts are intended to be read in conjunction with one another.

Complete, filled transport packages. General rules for the compilation of performance test schedules. Part 2: Quantitative data

DS/ISO 4178:1980 满装的运输包装.分类检验.要记录的信息

This International Standard specifies the information to be recorded when carrying out distribution trials involving complete, filled transport packages. It is applicable to distribution systems in which the hazards of stacking, vertical impact, horizontal impact, and vibration are encountered or are likely to be encountered.

Complete filled transport packages. Distribution trials. Information to be recorded

DS/EN 76:1980 某些预包装食品的包装．玻璃和金属容器的容量

1 This European Standard specifies capacities of glass and round rigid metal containers for the packaging of preserves (and semi-preserves) of vegetable products (fruit, vegetables, toma-toes, potatoes) for human consumption. 2 Excluded from this standard are containers for pre-packaging jams, marmalades, chestnut pa-ste, soups, sauces, baby foods, fruit and vegetable juices and all frozen and dried vegetable pro-ducts. Also excluded are vent-hole and "a decollage" metal containers.

Packages for certain prepasked foodstuffs. Capacities of glass and metal containers

DS/EN 23-1:1979 洗衣粉和清洁粉包装 纸箱和桶的尺寸和体积形成纤维板

Packages for washing and cleaning powder. Dimensions an volumes of cartons an d drumms form fibre board

DS 992:1978 包装 危险品用棱纹玻璃瓶

Packageing. Ribbed glass bottles for dangerous goods

DS 2068:1968 矿泉水玻璃瓶 25厘升

Glass bottles for mineral water. 25 cl

DS 53:1967 啤酒用玻璃瓶

The standard specifies dimensions for glass bottles for beer of 70 and 35 cl capacity.

Glass bottles for beer

DS 389:1967 瓶子和玻璃瓶用螺纹

The standard establishes a nominal profile for screw threads for bottles and glass jars.

Screw threads for bottles and glass jars