43.040.20 照明、信号和警告设备 标准查询与下载

SAE J1319-2015 后雾灯系统

This SAE Recommended Practice provides test procedures, requirements, and guidelines for rear fog lamp systems.

Rear Fog Lamp Systems

GSO ISO/TR 9819:2015 道路车辆 交通信号装置光度要求规则对照表

This Technical Report establishes a comparison of regulations on the requirements for light signalling devices to be installed into road vehicles and their trailers. It may be applied in the lack of detailed specifications to choose the photometric requirements or standard for the appropriate lamps regarding their design data and design test values. Sample(s) of light signalling devices taken from production or stock, etc. are to be tested in compliance with the appropriate test documents under "performance requirements" in NA and "conformity of production" in EU.

Road vehicles -- Comparison tables of regulations on photometric requirements of light signalling devices

SAE J2595-2015 密封光束机动车前照灯的性能要求

This SAE Recommended Practice is intended as a guide toward standard practice and is subject to change to keep pace with experience and technical advances. This document establishes performance requirements, material requirements, design requirements, and design guidelines for sealed beam headlamps.

Performance Requirements for Sealed Beam Motor Vehicle Headlamps

GA/T 1256-2015 发光式道路交通指挥棒

本标准规定了发光式道路交通指挥棒的术语和定义、命名、技术要求、试验方法、检验规则、包装、运输与贮存。 本标准适用于发光式道路交通指挥棒的研制、生产、检验和验收。

Luminous road traffic baton

DB52/T 996-2015 货车及挂车反射器型车身反光标识

Truck and trailer reflector body reflective marking

GOST R IEC 60810-2015 道路车辆用灯具. 性能要求

Lamps for road vehicles. Performance requirements

KS R ISO 4148-2014(2019) 道路车辆 - 特殊警示灯 - 尺寸

Road vehicles — Special warning lamps — Dimensions

KS R ISO 4148:2014 道路车辆 专用警告信号灯 尺寸

Road vehicles — Special warning lamps — Dimensions

KS R 5064-2014 汽车前照灯测试仪

Head light testers for autombiles

KS R 5070-2014 汽车倒车灯开关

Back-up lamp switches for automobiles

IEC 60810:2014 道路车辆用灯.性能要求

"This International Standard is applicable to lamps (filament lamps@ discharge lamps and LED light sources) to be used in headlamps@ fog-lamps and signalling lamps for road vehicles. It is especially applicable to those lamps which are listed in IEC 60809. However@ the standard may also be used for other lamps falling under the scope of this standard. It specifies requirements and test methods for the measurement of performance characteristics such as lamp life@ luminous flux maintenance@ torsion strength@ glass bulb strength and resistance to vibration and shock. Moreover@ information on temperature limits@ maximum lamp outlines and maximum tolerable voltage surges is given for the guidance of lighting and electrical equipment design. For some of the requirements given in this standard@ reference is made to data given in tables. For lamps not listed in such tables@ the relevant data are supplied by the lamp manufacturer or responsible vendor. The performance requirements are additional to the basic requirements specified in IEC 60809. They are@ however@ not intended to be used by authorities for legal type-approval purposes. NOTE 1 In the various vocabularies and standards@ different terms are used for ""incandescent lamp"" (IEC 60050- 845:1987@ 845-07-04) and ""discharge lamp"" (IEC 60050-845:1987@ 845-07-17). In this standard@ ""filament lamp"" and ""discharge lamp"" are used. However@ where only ""lamp"" is written both types are meant@ unless the context clearly shows that it applies to one type only. NOTE 2 This standard does not apply to luminaires. NOTE 3 In this standard@ the term LED light source is used@ in other standards the term LED lamps can be used to describe similar products."

Lamps for road vehicles - Performance requirements

SAE J914-2014 长度小于12 m的车辆用侧转向灯

This SAE Standard provides installation requirements, test procedures, design guidelines, and performance requirements for side turn signal lamps for vehicles less than 12 m in length.

Side Turn Signal Lamps for Vehicles Less than 12 m in Length

SAE J585-2014 总体宽度小于2032mm的机动车辆用尾灯(后位灯)

This SAE Standard provides test procedures, requirements, and guidelines for tail lamps (rear position lamps) intended for use on vehicles of less than 2032 mm in overall width.

Tail Lamps (Rear Position Lamps) for Use on Motor Vehicles Less than 2032 mm in Overall Width

SAE J759-2014 照明识别代码

This SAE Recommended Practice provides the lighting function identification codes for use on all passenger vehicles, trucks, trailers, motorcycles, and emergency vehicles.

Lighting Identification Code

SAE J1424-2014 5443kg(12000 lb)GVWR载荷下车辆使用的货物照明灯

This SAE Recommended Practice provides test procedures, performance requirements, and guidelines for cargo lamps intended for use on vehicles under 5443 kg (12000 lb) GVWR.

Cargo Lamps for Use on Vehicles Under 5443 kg (12 000 lb) GVWR

SAE J595-2014 认可的应急、维护和服务车辆用定向闪烁光学警告装置

This document provides design guidelines, test procedure references, and performance requirements for directional, single color, flashing optical warning devices used on authorized emergency, maintenance and service vehicles. It is intended to apply to, but not limited to, surface land vehicles.

Directional Flashing Optical Warning Devices for Authorized Emergency, Maintenance, and Service Vehicles

SAE J2042-2014 整体宽度为2032 mm或更长的机动车用限界灯、旁侧示廓灯和标志灯

This SAE Standard provides test procedures, requirements, and guidelines for clearance, sidemarker, and identification lamps intended for use on vehicles 2032 mm or more in overall width. A clearance lamp, sidemarker lamp, or an identification lamp conforming to the requirements of this document may be used on vehicles less than 2032 mm in overall width.

Clearance, Sidemarker, and Identification Lamps for Use on Motor Vehicles 2032 mm or More in Overall Width

DIN EN 60810:2014 道路机动车辆用灯.性能要求(IEC 60810-2003+A1-2008+A2-2013).德文版本EN 60810-2003+A1-2008+A2-2013

Lamps for road vehicles - Performance requirements (IEC 60810:2003 + A1:2008 + A2:2013); German version EN 60810:2003 + A1:2008 + A2:2013

SAE J2039-2014 大型车辆用的转弯单个灯

This SAE Recommended Practice provides test procedures, requirements, and guidelines for side turn signal lamps intended for use on vehicles 12 m or more in overall length, except pole trailers. Side turn signal lamps conforming to the requirements of this document may be used on other large vehicles such as trucks, truck tractors, buses, and other applications where this type of lighting device is desirable. It is not intended for use on shorter vehicles due to the higher intensity requirements of SAE J2039 compared to the SAE J914 devices.

Side Turn Signal Lamps for Long Vehicles

KS R 5040-2013 汽车润滑油压力警示灯开关

Warning lamp switches of lubricating oil pressure for automobiles