43.040.70 联轴器 标准查询与下载

KS R ISO 1102:2014 商用道路车辆 50mm的牵引杆孔 互换性

이 표준은 트레일러의 연결 장치 구성품의 호환성 및 견인 차량과 이 연결 장치가 있는 트레일러 사이의 호환성상 필요한 50 mm 드로바 아이의 특성에 대하여 규정한다.이 표준은 최대 총 질량이 3.5톤을 초과하는 상용차와 트레일러용 연결 장치에 적용한다.?

Commercial road vehicles — 50 mm drawbar eye — Interchangeability

KS R ISO 1102-2014(2019) 商业道路车辆 - 50毫米拉杆眼 - 互换性

Commercial road vehicles — 50 mm drawbar eye — Interchangeability

SAE J684-2014 挂车联结器连接装置和安全链汽车类型

This SAE Standard includes couplings, hitches, and safety chains used in conjunction with all types of trailers or towed vehicles whose Gross Vehicle Weight Rating (GVWR) does not exceed 4540 kg (10 000 lb). This includes such types as utility, boat, camping, travel, and special purpose trailers which are normally towed by conventional passenger cars, light-duty commercial vehicles, light trucks, and multipurpose passenger vehicles. This document is intended primarily for ball-and-socket type of couplings and hitches. It should not be construed as a limitation to this type alone but should apply where appropriate to ring-and-pintle, clevis-and-pin, or any o

Trailer Couplings, Hitches, and Safety Chains-Automotive Type

DB13/T 1826-2013 汽车离合器分泵总成技术条件

本标准规定了汽车离合器分泵总成(以下简称“分泵总成”)的规格、技术要求、试验方法、检验规则、标志、包装、运输、贮存。 本标准适用于汽车用非石油基制动液的液压离合器分泵总成。

Technical specification for automobile clutch slave cylinder assembly

KS R 2005-2013 汽车用U形夹配件

Clevis fitting parts for automobiles

BS ISO 13044-2:2013 道路车辆. 重型商用汽车组合用24 V全自动耦合系统 (FACS).50 mm牵引座. 电气和气胎接口

Road vehicles. Fully automatic coupling systems 24 V (FACS) for heavy commercial vehicle combinations. 50 mm fifth wheel couplings. Electrical and pneumatic interface

GSO ISO 8035:2013 重量超过 3.5 吨的商用道路车辆和公共汽车 前牵引装置

This International Standard specifies the characteristics required of attachments mounted on the front of commercial road vehicles and buses (as defined in ISO 3833) of maximum total authorized mass over 3,5 t (ISO-M08). The attachment permits the use of ropes, cables or bars, at the choice of the manufacturer, allowing the vehicle to be towed, or otherwise manoeuvred by other vehicles, or to be used for manoeuvring other vehicles. It excludes attachments for emergency operations, e.g. recovery of road vehicles after an accident. This International Standard does not apply to special purpose vehicles and standard vehicles used for special applications.

Commercial road vehicles and buses over 3,5 t -- Front towing attachments

GSO ISO 3842:2013 公路车辆 第五轮 可互换

This International Standard lays down the dimensional characteristics necessary for mounting and interchangeability of the fifth wheel mounted on a mounting plate (standard fifth wheel, Clause 4) or directly on the frame (direct-mounted fifth wheel, Clause 5) of towing vehicles for semi-trailers. It applies to the fifth wheels intended to hitch on semi-trailers equipped with a: — 50 coupling pin as defined in ISO 337; — 90 coupling pin as defined in ISO 4086. Dimensions not specified are left to the discretion of the component manufacturer. Test conditions and strength requirements to be met by 50 and 90 fifth wheel coupling are specified in ISO 8717.

Road vehicles -- Fifth wheels -- Interchangeability

GSO ISO 1726-2:2013 道路车辆 机车与半挂车之间的机械耦合 第2部分：低机械耦合机车与大型半挂车之间的互换性

This part of ISO 1726 specifies dimensions to ensure interchangeability between a low coupling height tractor vehicle and a coupled high-volume semi-trailer, the two together constituting a high-volume articulated vehicle. It specifies certain interchangeability dimensions, including those of the optimised gooseneck contour, as well as operating dimensions related to angle values. The specifications are primarily intended to permit semi-trailers to be coupled with two-axle tractors. However, three-axle tractors are not excluded, provided they are in compliance with the requirements of this part of ISO 1726. This part of ISO 1726 does not provide limitations of maximum gross mass and overall dimensions, which are generally laid down by legislative requirements.

Road vehicles -- Mechanical couplings between tractors and semi-trailers -- Part 2: Interchangeability between low-coupling tractors and high-volume semi-trailers

GSO ISO 4086:2013 道路车辆 半挂车用 90 型第五轮螺栓 可互换

This International Standard specifies the characteristics of the 90 [89 mm (3,5") diameter] semi-trailer fifth wheel kingpin used for coupling extra-heavy-duty vehicles exceeding the limitations of weight generally laid down by official requirements. It is applicable to fifth wheel kingpins intended for engaging 90 fifth wheels as defined in ISO 3842[1]. This International Standard also specifies the dimensional characteristics required for mounting and interchangeability. NOTE The dimensions of the 50 semi-trailer fifth wheel kingpin, normally used to couple semi-trailers to tractors in compliance with mass limitations usually set by compulsory regulations, are given in ISO 337[2].

Road vehicles -- 90 semi-trailer fifth wheel kingpin -- Interchangeability

GSO ISO 3584:2013 道路车辆 牵引杆联轴器 可互换

This International Standard specifies the characteristics necessary for the mounting and interchangeability of drawbar couplings on the frame (cross member, drawbeam or mounting bracket) of towing vehicles for trailers. This International Standard is applicable to drawbar couplings intended for connection to trailers equipped with a drawbar eye on the drawbar of the trailer. Characteristics not specified are left to the discretion of the component manufacturer.

Road vehicles -- Drawbar couplings -- Interchangeability

GSO ISO 337:2013 道路车辆 50 半挂车牵引座连接销 基本尺寸和安装/互换性尺寸

Abstract This second edition cancels and replaces the first edition (1973). Specifies the dimensions of the 50 coupling pin /dia. 50,8 mm (2 in)/ which is used for coupling semi-trailers to prime movers, taking into account the limitations of weight generally laid down by official requirements. Some figures illustrate shapes and the difference of types.

Road vehicles -- 50 semi-trailer fifth wheel coupling pin -- Basic and mounting/interchangeability dimensions

GSO ISO 8717:2013 商用道路车辆—第五轮联轴器—强度试验

This International Standard specifies the test conditions and strength requirements to be met by 50 and 90 fifth wheel couplings (see ISO 3842).

Commercial road vehicles -- Fifth wheel couplings -- Strength tests

GSO ISO 8755:2013 商用越野车 40 毫米拉杆凸耳 可互换

This International Standard specifies the characteristics of 40 mm drawbar eyes, necessary for the interchangeability of the coupling components on trailers and permitting interchangeability between towing vehicles and trailers equipped with these components. This International Standard is applicable to mechanical connections designed for commercial vehicles and trailers, the maximum total mass of which is above 3,5 t.

Commercial road vehicles -- 40 mm drawbar eye -- Interchangeability

GSO ISO 11406:2013 商用道路车辆 带有后置挂钩和拖车牵引杆的牵引车的机械连接 互换性

This International Standard specifies the requirements for the various elements and dimensions of towing vehicles with rear-mounted coupling and of drawbar trailers, to ensure interchangeability. NOTE Annex B gives examples of different configurations of vehicle combinations; this International Standard deals only with No. B.1.1. This International Standard is applicable to road trains for commercial transport of cargo of the greatest possible variety; it does not cover dedicated or special combinations. Nor does it specify limitations of maximum gross mass and overall dimensions, which are generally laid down by legislative requirements. Vehicles whose couplings form the subject of this International Standard are not interchangeable with vehicles whose couplings are mounted forward and below (which form the subject of ISO 11407 [1]).

Commercial road vehicles -- Mechanical coupling between towing vehicles with rear-mounted coupling and drawbar trailers -- Interchangeability

GSO ISO 1726-3:2013 道路车辆 机车和半挂车之间的机械连接 第 III 部分：半挂车第五轮接触面积要求

This part of ISO 1726 specifies the test conditions of a static test to be performed on the semi-trailer contact area to the fifth wheel. It ensures the ability of the semi-trailer to couple the greatest possible variety of tractor vehicles equipped with a fifth wheel coupling in accordance with ISO 3842.

Road vehicles -- Mechanical couplings between tractors and semi-trailers -- Part 3: Requirements for semi-trailer contact area to fifth wheel

GSO ISO 1726-1:2013 道路车辆 机车和半挂车之间的机械连接 第1部分：机车和普通货运半挂车之间的互换性

This International Standard specifies dimensions to ensure interchangeability between a tractor vehicle and a coupled semi-trailer, the two together constituting an articulated vehicle. It specifies certain interchangeability dimensions, including those of the gooseneck contour, as well as operating dimensions related to angle values. The specifications permit the same semi-trailer to be used with either two- or three-axle tractors. Annex A gives interface technical specifications for tractors designed for towing high-cube semi-trailers, including ISO containers having an external height of 2,9 m. This International Standard covers articulated vehicles used in commercial cargo transport of the greatest possible variety. However, it may not be applicable to special combination types such as low-bed or tipper vehicles. This International Standard does not provide limitations of maximum gross mass and overall dimensions, which are generally laid down by legislative requirements.

Road vehicles -- Mechanical coupling between tractors and semi-trailers -- Part 1: Interchangeability between tractors and semi-trailers for general cargo

GSO ISO 8716:2013 道路车辆 第五轮关键螺栓 强度测试

This International Standard specifies strength test conditions and requirements for 50 and 90 fifth wheel kingpins. NOTE See ISO 337 [1] and ISO 4086 [2].

Road vehicles -- Fifth wheel kingpins -- Strength test

GSO ISO 11407:2013 商用道路车辆 牵引车的机械联轴器（联轴器安装在拖车的前轴、下轴和中轴上） 互换性

This International Standard specifies the interchangeability requirements of the various elements and dimensions for the mechanical coupling of towing vehicles whose coupling is mounted forward and below to centre-axle trailers. It is applicable to road trains for the commercial transport of low-density, high-volume cargo of the greatest possible variety. It is also applicable to corresponding equipment in cases where the same vehicle makes up part of a road train having more than one trailer. It is not applicable to dedicated or special combinations such as coupling systems with an extensible drawbar; nor does it specify limitations on maximum gross mass and overall dimensions, which are generally laid down by legislative requirements. Vehicle combinations whose couplings form the subject of this International Standard (see Annex B for examples) are not interchangeable with those whose couplings are rear-mounted (see ISO 11406).

Commercial road vehicles -- Mechanical coupling between towing vehicles, with coupling mounted forward and below, and centre-axle trailers -- Interchangeability

DS/ISO 13044-2:2013 道路车辆 用于重型商用车组合的全自动 24 V 耦合系统（FACS） 第2部分：50 毫米第五轮耦合器 电气和气动接口

This part of ISO 13044 specifies the mechanical, electrical/electronic and pneumatic characteristics of a fully automated fifth wheel coupling system to ensure interchangeability between a tractor vehicle and a coupled semi-trailer(s) with 24 V nominal su

Road vehicles - Fully automatic coupling systems 24 V (FACS) for heavy commercial vehicle combinations - Part 2: 50 mm fifth wheel couplings - Electrical and pneumatic interface