43.040.70 联轴器 标准查询与下载
共找到 225 条与 联轴器 相关的标准，共 15 页
The eyes of motor-vehicle towing-devices. Safety requirements
- ICS
- 43.040.70
- CCS
- 发布
- 2005
- 实施
- 2007-01-01
This International Standard specifies the interchangeability requirements of the various elements and dimensions for the mechanical coupling of towing vehicles whose coupling is mounted forward and below to centre-axle trailers. It is applicable to road trains for the commercial transport of low-density, high-volume cargo of the greatest possible variety. It is also applicable to corresponding equipment in cases where the same vehicle makes up part of a road train having more than one trailer. It is not applicable to dedicated or special combinations such as coupling systems with an extensible drawbar; nor does it specify limitations on maximum gross mass and overall dimensions, which are generally laid down by legislative requirements. Vehicle combinations whose couplings form the subject of this International Standard (see Annex B for examples) are not interchangeable with those whose couplings are rear-mounted (see ISO 11406).
Commercial road vehicles - Mechanical coupling between towing vehicles, with coupling mounted forward and below, and centre-axle trailers - Interchangeability
- ICS
- 43.040.70
- CCS
- T25
- 发布
- 2004-11
- 实施
This document establishes minimum performance criteria and definition of terms for the towing interface between a towing vehicle and fifth wheel or gooseneck trailer at or below 13 608 kg (30 000 lb) gross trailer weight. This establishes criteria for the hitch, tow vehicle attachment structure, trailer attachment structure, and coupling. This document is intended as a guide for manufacturers of fifth wheel and/or gooseneck trailers at or below 13 608 kg (30 000 lb) gross trailer weight and of tow vehicles and of components necessary to tow these trailers. Regulatory authorities desiring to formulate regulations may use this standard as a guide. This document is also intended for voluntary use by others associated with manufacturing of these products.
Fifth Wheel and Gooseneck Attachment Performance Up to 13 608/kg (30 000/lb) Trailer GVW
- ICS
- 43.040.70
- CCS
- T33
- 发布
- 2003-10-01
- 实施
- 2017-11-30
This Technical Specification specifies the maximum allowable wear and the limit dimensions of worn components of in-use mechanical couplings, which, when respected, will ensure the safe operation on the road of heavy commercial vehicles fitted with such couplings. It is applicable to the following standardized mechanical couplings: — 40 mm and 50 mm drawbar couplings (see ISO 3584); — 40 mm and 50 mm drawbar eyes (see ISO 8755 and ISO 1102); — 50 mm and 90 mm fifth wheel kingpins (see ISO 337 and ISO 4086); — hook couplings and toroidal eyes (see ECE Regulation No. 55).
Road vehicles - Drawbar couplings, drawbar eyes, fifth wheel kingpins, hook couplings and toroidal eyes - Wear limits for in-use mechanical couplings
- ICS
- 43.040.70
- CCS
- T23
- 发布
- 2003-03
- 实施
Lays down the requirements which mechanical coupling devices and components shall meet in order to be regarded internationally as being mutually compatible.
Uniform provisions concerning the approval of mechanical coupling components of combinations of vehicles
- ICS
- 43.040.70
- CCS
- T33
- 发布
- 2003-02-28
- 实施
Road vehicles－Fifth wheels－Interchangeability
- ICS
- 43.040.70
- CCS
- 发布
- 2002-12-31
- 实施
이 규격은 세미 트레일러 견인차 프레임(보조 프레임 또는 브래킷) 위의 제5륜 연결기의
Road vehicles-Fifth wheels-Interchangeability
- ICS
- 43.040.70
- CCS
- T35
- 发布
- 2002-12-31
- 实施
- 2002-12-31
Lashing and securing arrangements on road vehiclesfor sea transportation on Ro/Ro ships－Part 2：Semi-trailers
- ICS
- 43.040.70
- CCS
- 发布
- 2001-12-31
- 实施
이 규격은 로로선(Ro/Ro Ship)에 도로 차량을 싣는데 있어서 능률적이고 견고한 고박
Lashing and securing arrangements on road vehiclesfor sea transportation on Ro/Ro ships－Part 1：Commercial vehicles and combinations of vehicles(semi-trailers excluded)
- ICS
- 43.040.70
- CCS
- T43
- 发布
- 2001-12-31
- 实施
- 2001-12-31
이 규격은 ISO 3833에서 규정된 세미트레일러를 로로 선박(Ro/Ro Ship)에 싣는
Lashing and securing arrangements on road vehiclesfor sea transportation on Ro/Ro ships－Part 2：Semi-trailers
- ICS
- 43.040.70
- CCS
- T71
- 发布
- 2001-12-31
- 实施
- 2001-12-31
Lashing and securing arrangements on road vehiclesfor sea transportation on Ro/Ro ships－Part 2：Semi-trailers
- ICS
- 43.040.70
- CCS
- 发布
- 2001-12-31
- 实施
Lashing and securing arrangements on road vehiclesfor sea transportation on Ro/Ro ships－Part 1：Commercial vehicles and combinations of vehicles(semi-trailers excluded)
- ICS
- 43.040.70
- CCS
- 发布
- 2001-12-31
- 实施
Lashing and securing arrangements on road vehiclesfor sea transportation on Ro/Ro ships－Part 1：Commercial vehicles and combinations of vehicles(semi-trailers excluded)
- ICS
- 43.040.70
- CCS
- 发布
- 2001-12-31
- 实施
This International Standard specifies strength test conditions and requirements for 50 and 90 fifth wheel kingpins. NOTE See ISO 337 and ISO 4086 .
Road vehicles - Fifth wheel kingpins - Strength test
- ICS
- 43.040.70
- CCS
- T72
- 发布
- 2001-12
- 实施
This International Standard specifies strength test conditions and requirements for the 40 mm and 50 mm drawbar couplings and corresponding drawbar eyes for hinged drawbars. NOTE See ISO 3584 for couplings, and ISO 1102 and ISO 8755 for eyes.
Road vehicles - Drawbar couplings and eyes for hinged drawbars - Strength tests
- ICS
- 43.040.70
- CCS
- T72
- 发布
- 2001-12
- 实施
This International Standard specifies the characteristics necessary for the mounting and interchangeability of drawbar couplings on the frame (cross member, drawbeam or mounting bracket) of towing vehicles for trailers. This International Standard is applicable to drawbar couplings intended for connection to trailers equipped with a drawbar eye on the drawbar of the trailer. Characteristics not specified are left to the discretion of the component manufacturer.
Road vehicles - Drawbar couplings - Interchangeability
- ICS
- 43.040.70
- CCS
- T43
- 发布
- 2001-11
- 实施
This International Standard specifies the characteristics of the 90 [89 mm (3,5") diameter] semi-trailer fifth wheel kingpin used for coupling extra-heavy-duty vehicles exceeding the limitations of weight generally laid down by official requirements. It is applicable to fifth wheel kingpins intended for engaging 90 fifth wheels as defined in ISO 3842 . This International Standard also specifies the dimensional characteristics required for mounting and interchangeability. NOTE The dimensions of the 50 semi-trailer fifth wheel kingpin, normally used to couple semi-trailers to tractors in compliance with mass limitations usually set by compulsory regulations, are given in ISO 337 .
Road vehicles - 90 semi-trailer fifth wheel kingpin - Interchangeability
- ICS
- 43.040.70
- CCS
- T33
- 发布
- 2001-10
- 实施
This International Standard specifies the characteristics of 40 mm drawbar eyes, necessary for the interchangeability of the coupling components on trailers and permitting interchangeability between towing vehicles and trailers equipped with these components. This International Standard is applicable to mechanical connections designed for commercial vehicles and trailers, the maximum total mass of which is above 3,5 t.
Commercial road vehicles - 40 mm drawbar eye - Interchangeability
- ICS
- 43.040.70
- CCS
- T33
- 发布
- 2001-10
- 实施
This International Standard specifies the characteristics of 50 mm drawbar eyes, necessary for the interchangeability of the coupling components on trailers and permitting interchangeability between towing vehicles and trailers equipped with these components. This International Standard is applicable to mechanical connections designed for commercial vehicles and trailers, the maximum total mass of which is above 3,51.
Commercial road vehicles - 50 mm drawbar eye - Interchangeability
- ICS
- 43.040.70
- CCS
- T33
- 发布
- 2001-10
- 实施
