43.060.20 标准查询与下载
共找到 213 条与 相关的标准，共 15 页
本标准规定了汽车发动机塑料进气歧管总成的术语和定义、结构示意图、基本要求、技术要求、试验方法、检验规则、标记、包装、运输及贮存、质量承诺等。 本标准适用于包含进气歧管壳体、节气门体密封圈、缸头法兰密封圈、嵌件的汽车发动机塑料进气歧管总成。
Automotive engine plastic intake manifold assembly
- ICS
- 43.060.20
- CCS
- C3670
- 发布
- 2019-12-26
- 实施
- 2020-02-10
What is ISO 17536 ‑ 4 - Road Vehicles about? ISO 17536 is a series of international standards on road vehicles that discusses aerosol separator performance. ISO 17536 ‑ 4 is the fourth part of the ISO 17536 series of documents that defines standardized and repeatable test procedures for the evaluation of blowby oil aerosol separators and filtering devices and specifies laboratory fractional separation efficiency in both open and closed crankcase ventilation systems.
Road Vehicles. Aerosol separator performance test for internal combustion engines - Laboratory fractional efficiency test method
- ICS
- 43.060.20
- CCS
- 发布
- 2019-11-30
- 实施
- 2019-11-30
本标准规定了汽车废气再循环电动阀的术语和定义、基本要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存及质量承诺。 本标准适用于以汽油、柴油为燃料的汽车废气再循环电动阀。
Automotive electric valve for exhaust gas recirculation
- ICS
- 43.060.20
- CCS
- C3670
- 发布
- 2019-11-27
- 实施
- 2020-01-17
This document defines standardized and repeatable test procedures for the evaluation of blowby oil aerosol separators and filtering devices and specifies laboratory fractional separation efficiency in both open and closed crankcase ventilation systems. Filter life is not evaluated in this document. The conditioned portion of this test only applies to filters that can meet the Dp stability requirements referenced in ISO/TS 17536-2. Conformance of a device to legislation is outside of the scope of this document. Due to limited precision using current equipment, this document is not suitable for filters above an efficiency of 99 %.
Road Vehicles — Aerosol separator performance test for internal combustion engines — Part 4: Laboratory fractional efficiency test method
- ICS
- 43.060.20
- CCS
- 发布
- 2019-11-15
- 实施
- 0000-00-00
Automotive diesel engine fuel heating device
- ICS
- 43.060.20
- CCS
- T30
- 发布
- 2019-11-11
- 实施
- 2020-04-01
Test methods for remanufactured turbocharger of passenger cars
- ICS
- 43.060.20
- CCS
- 发布
- 2019-11-01
- 实施
本标准规定了汽车发动机热端部件-冲压排气歧管（以下简称排气歧管）的术语和定义、基本要求、技术要求、试验方法、检验规则、标志、包装、运输及贮存、质量承诺。 本标准适用于冷冲压工艺生产的发动机热端部件用排气歧管，该产品应用于YC KAPPA发动机。
Hot end component of automotive engine-stamping exhaust manifold
- ICS
- 43.060.20
- CCS
- C3670
- 发布
- 2019-05-22
- 实施
- 2019-05-24
BS ISO 17536-4. Road Vehicles. Aerosol separator performance test for internal combustion engines - Part 4. Laboratory fractional efficiency test method
- ICS
- 43.060.20
- CCS
- 发布
- 2019-02-11
- 实施
- 2019-02-11
Inlet air cleaning equipment for internal combustion engines and compressors — Performance testing
- ICS
- 43.060.20
- CCS
- 发布
- 2018-11-07
- 实施
Inlet air cleaning equipment for internal combustion engines and compressors — Performance testing
- ICS
- 43.060.20
- CCS
- 发布
- 2018-11-07
- 实施
本标准适用于在用柴油车的环保定期检验、现场检查、抽样抽测等环节。
Specifications for compliance inspection of pollution control devices for in-use diesel vehicles
- ICS
- 43.060.20
- CCS
- T13
- 发布
- 2018-09-21
- 实施
- 2018-10-01
Road Vehicles - Aerosol separator performance test for internal combustion engines - Part 5: Engine fractional efficiency test method and upstream distribution sampling method
- ICS
- 43.060.20
- CCS
- 发布
- 2018-09-00
- 实施
本标准规定了术语与定义、基本要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存、质量与服务承诺。 本标准适用于M1类汽车排气消声器总成用不锈钢焊接钢管。
Stainless steel welded tube for automotive exhaust muffler assembly
- ICS
- 43.060.20
- CCS
- C3670
- 发布
- 2018-08-06
- 实施
- 2019-03-06
1 Scope This International Standard establishes and specifies uniform test procedures, conditions, equipment, and a performance report to permit the direct laboratory performance comparison of air cleaners . The basic performance characteristics of greatest interest are air flow restriction or differential pressure , dust collection efficiency , dust capacity , and oil carry-over on oil bath air cleaners . This test code therefore deals with the measurement of these parameters. This International Standard is applicable to air cleaners used on internal combustion engines and compressors generally used in automotive and industrial applications .
Inlet air cleaning equipment for internal combustion engines and compressors. Performance testing
- ICS
- 43.060.20
- CCS
- 发布
- 2018-04-30
- 实施
- 2018-04-30
Inlet air cleaning equipment for internal combustion engines and compressors — Performance testing
- ICS
- 43.060.20
- CCS
- 发布
- 2018-03-19
- 实施
Road vehicles - Aerosol separator performance test for internal combustion engines - Part 2: Laboratory test method
- ICS
- 43.060.20
- CCS
- 发布
- 2017-10-10
- 实施
Technical specifications for metal honeycomb carriers for exhaust catalytic converters
- ICS
- 43.060.20
- CCS
- T13
- 发布
- 2017-04-21
- 实施
- 2017-10-01
Test methods for automotive air filters
- ICS
- 43.060.20
- CCS
- T13
- 发布
- 2017-01-09
- 实施
- 2017-07-01
