43.060.20 标准查询与下载

QC/T 631-2009 汽车排气消声器总成技术条件和试验方法

本标准规定了汽车排气消声器总成的术语和定义、技术条件、试验方法、检验规则、标志、包装、运输及贮存。 本标准适用于M类和N类机动车辆用的排气消声器总成。

Automotive exhaust muffler assembly technical specification and test methods

TIS 1694-2008 内燃机和压缩机的空气进气清洁装置.性能测试

Inlet air cleaning equipment for internal combustion engines and compressors.performance testing

GOST R 53637-2009 汽车涡轮增压器.一般技术要求和测试方法

Automotive turbochargers. General technical requirements and test methods

KS R ISO 7312-2008 道路车辆 空气滤清器连接 A型和B型

Road vehicles－Air filter connections－Types A and B

KS R ISO 7312:2008 道路车辆空气滤清器连接类型A和B

Road vehicles－Air filter connections－Types A and B

KS R ISO 5011:2008 内燃机和压缩机的空气进气清洁设备.性能测试

이 표준은 공기 청정기의 성능을 시험실에서 직접 비교하기 위한 일관적인 시험방법, 조건,

Inlet air cleaning equipment for internal combustion engines and compressors－Performance testing

CAS 161-2008 节气门清洗剂

本标准规定了节气门清洗剂的技术要求、试验方法、检验规则、标志、包装、运输及贮存。 本标准适用于以多种有机溶剂及适量添加剂复配而成的汽油机节气门清洗剂。

Throttle cleaning agent

KS R 0099-2008 道路车辆 燃油喷射泵测试 第1部分；动态条件

ROAD VEHICLES - FUEL INJECTION PUMP TESTING - PART 1 ; DYNAMIC CONDITIONS

KS R 0100-2008 道路车辆锛岩燃油喷射泵测试锛岭艺术2锛振静态条件

Road vehicles－Fuel injection pump testing－Part 2：Static conditions

QC/T 795.2-2007 道路车辆 乘驾室用空气滤清器 第2部分:气体过滤测试

QC/T 795 的本部分规定了测试乘驾室用空气滤清器对有害气体的动态吸附的若干试验方法。这些测试方法适用于那些提高乘驾室内空气质量的空气滤清器，它们能减少来自外部环境或内循环中的有害气体和异味的浓度。 这些方法可测试滤清器的压力降以及去除有害气体和可挥发物的效率。

Road vehicles- Air filters for passenger compartment-Part 2: Test for gaseous filtration

QC/T 786-2007 汽车 柴油机 具有垂直安装面的燃油滤清器座 安装和连接尺寸

本标准规定了柴油机（压缩点火式）具有垂直安装面的燃油滤清器滤座的安装和连接尺寸。 本标准适用于螺栓固定的滤清器和装有QC/T 767-2006规定的外径不大于88mm的旋装式燃油滤清器滤座。

Diesel engines-Heads for fuel mters with vertical flange-Mounting and connecting dimensions

QC/T 787-2007 汽车 柴油机 具有水平安装面的燃油滤清器滤座 安装和连接尺寸

本标准规定了柴油机（压缩点火式）旋装式燃油滤清器滤座的安装和连接尺寸。 本标准适用于装有 QC/T 767-2006 规定的外径不大于 88mm 的旋装式燃油滤清器滤座。

Diesel engines Heads for fuel alters with hodzontal nange-Mounting and connecting dimensions

QC/T 794-2007 内燃机工业滤纸

本标准规定了内燃机工业滤纸（以下简称滤纸）的术语和定义、分类、要求、试验方法、检验规则及标志、包装、运输和储存。 本标准适用于内燃机滤清器用滤纸。

Internal-combustion engine industry filter paper

QC/T 795.1-2007 道路车辆 乘驾室用空气滤清器 第1部分:粉尘过滤测试

QC/T 795 的本部分规定了测试乘驾室用空气滤清器对进入驾乘室空气中的污物（包括灰尘和花粉等）进行过滤的若干试验方法。本部分以此在实验室中评价或比较乘驾室空气滤清器和滤芯的性能。 通过测试可给出滤清器的下述信息：压力降、分级过滤效率和储灰量等。

Road vehicles-Air filters for passenger compartment-Part 1: Test for particulate filtration

KS R 2059-2007(2022) 卡车和公共汽车的调平阀

Levelling valve for trucks and buses

KS R 2059-2007 货车、客车平液阀门

이 규격은 트럭 및 버스용 공기 스프링 장치에 사용하는 레벨링 밸브에 대해서 규정한다.

Levelling valve for trucks and buses

KS R 2059-2007(2017) 卡车和公共汽车调平阀

Levelling valve for trucks and buses

SANS 20059:2007 关于批准备用消声系统的统一规定

Covers replacement silencing systems for vehicles of category M1 and N1.

Uniform provisions concerning the approval of replacement silencing systems

GSO ISO 12103-2:2007 道路车辆 过滤器评估用试验粉尘 第2部分：氧化铝试验粉尘

This part of ISO 12103 specifies the particle size distribution of five inorganic test dusts used for the evaluation of filters. These dust are used in conjunction with various test procedures designed to evaluate, in general, fuel and lubricating oil filters for internal combustion engines by gravimetric methods. The dusts may also be used for a number of other applications, such as for abrasion tests, where distinct, known particle size distributions of hard, abrasive material are required.

Road vehicles -- Test dust for filter evaluation -- Part 2: Aluminium oxide test dust

GSO ISO 7750-1:2007 商用车 空气滤清器滤芯尺寸 第1部分：A 型和 B 型滤清器

This part of ISO 7750 specifies the dimensions necessary for interchangeability of filter elements for air filters generally used in commercial vehicles. Two element types, A and B, are specified; they differ in the bottom and cup design and require different installation conditions (see annex A). Types A and B are not interchangeable. The selected sizes specified in tables 1 and 2 are based upon popular elements currently on the market. This part of ISO 7750 may be used for other air filter applications where no specific standards exist.

Commercial vehicles – Dimensions of air filter elements Part 1 : Types A and B