45.100 索道设备 标准查询与下载
共找到 212 条与 索道设备 相关的标准，共 15 页
This document specifies additional safety requirements for reversible bicable aerial ropeways without carrier truck brakes. This standard is applicable to the various types of installations and takes into account their environment. It contains: — additional requirements relating to the integrity of the haul rope loop; — additional requirements intended to prevent specific operational incidents; — requirements concerning the attachment of the carriers to the haul rope. It does not apply to installations for the transportation of goods, nor to inclined lifts.
Safety requirements for cableways installations designed to carry persons - General requirements - Additional requirements for reversible bi-cable aerial ropeways without carrier truck brakes
- ICS
- 45.100
- CCS
- P52
- 发布
- 2004-10-28
- 实施
- 2004-10-28
This part of EN 12927 specifies the safety requirements applicable to long splicing of steel wires 6 strand hauling, carrying-hauling and towing ropes for installations for passenger transportation by rope. This standard is applicable to the various types installations systems and their environment. This part of EN 12927 applies to the requirements for the long splicing, repair and shortening of hauling and carrying hauling ropes that meet the requirements of EN 12385-8. This part of EN 12927 does not apply to installations for the transportation of goods, nor to inclined lifts.
Safety requirements for cableways installation designed to carry persons - Ropes - Long splicing of 6 strand hauling, carrying hauling and towing ropes
- ICS
- 45.100
- CCS
- P52
- 发布
- 2004-10-28
- 实施
- 2004-10-28
This part of EN 12927 specifies the safety requirements applicable to the selection criteria for ropes and their end fixings for installations for passenger transportation by rope. Its requirements are to be met taking into account the various types installations systems and their environment. This part of EN 12927 provides guidance on the selection of ropes and their end fixing for use on cableways. It does not apply for transportation of goods nor to inclined lifts.
Safety requirements for cableways installation designed to carry persons - Ropes - Selection criteria for ropes and their end fixing
- ICS
- 45.100
- CCS
- P52
- 发布
- 2004-10-28
- 实施
- 2004-10-28
This document specifies the safety requirements applicable to the operation of installations for passenger transportation by rope. This standard is applicable to the various types of installations and takes into account their environment. This document applies to the operation of an installation and to the passenger transport conditions and also contains requirements for passengers. It is applicable to individual installations or a set of installations. It does not cover legal provisions for the transport service nor transport obligations It includes requirements relating to the prevention of accidents and protection for workers. It does not apply to installations for the transportation of goods nor to inclined lifts.
Safety requirements for Cableway installations designed to carry persons - Operation
- ICS
- 45.100
- CCS
- P52
- 发布
- 2004-10-28
- 实施
- 2004-10-28
This part of EN 12929 specifies the safety requirements for general requirements for cableway installations designed to carry persons. These requirements are applied to the various types of installations and their environment. This document defines general technical characteristics and prescribes design principles and general safety requirements. It does not deal with details of operation and maintenance, nor with calculations and detailed requirements for the manufacture of components. This Part 1 does not deal with special requirements applicable to bicable reversible aerial ropeways without carrier truck brakes, which are the subject of Part 2. It includes requirements relating to the prevention of accidents and the protection of workers. It does not apply to cableways for the transportation of goods, nor to inclined lifts.
Safety requirements for cableways installation designed to carry persons - General requirements - Requirements for all installations
- ICS
- 45.100
- CCS
- P52
- 发布
- 2004-10-27
- 实施
- 2004-10-27
This part of EN 12927 specifies the minimum requirements of MRT equipment and procedures for use in the examination of steel wire ropes used on cableways for passenger transport. Performance requirements and testing of MRT equipment and qualification of personnel engaged in carrying out MRT are also included. This part of EN 12927 does not include requirements relating to the protection of workers.
Safety requirements for cableways installation designed to carry persons - Ropes - Magnetic rope testing (MRT)
- ICS
- 45.100
- CCS
- P52
- 发布
- 2004-10-27
- 实施
- 2004-10-27
This document specifies the safety requirements applicable to carrier recovery and passenger evacuation from cableway installations designed to carry persons, with the exception of ski-tows. This standard is applicable to various types of installations and takes into account their environment. This document establishes the requirements relating to the methods and equipment to be used to ensure the safety of passengers on cableways in the event of extended stoppage of the installation. It covers only the situation resulting from immobilization of the carriers, even if the passengers are not in immediate danger. It does not cover specific operations resulting from an accident. It includes requirements relating to the prevention of work accidents and to worker protection. It does not apply to installations for the transportation of goods by rope or to inclined lifts. It does not deal with construction provisions relating to carriers.
Safety requirements for cableway installations designed to carry persons - Recovery and evacuation
- ICS
- 45.100
- CCS
- P52
- 发布
- 2004-10-27
- 实施
- 2004-10-27
This document specifies the safety requirements applicable for the tensioning devices for cableway installations designed to carry persons. This standard is applicable to the various types of installations and takes into account their environment. This document applies to the design, manufacture, installation, maintenance and operation of rope tensioning devices and anchorages for cableway installations designed to carry persons. It includes requirements relative to the prevention of accidents and the protection of workers. It does not apply either to installations intended for the transport of goods or to inclined lifts.
Safety requirements for cableways installations designed to carry person - Tensionong Devices
- ICS
- 45.100
- CCS
- P52
- 发布
- 2004-10-27
- 实施
- 2004-10-27
This part of EN 12927 specifies the safety requirements for the storage, transportation, installation and tensioning of ropes for installations for the transportation of passenger by rope. It also includes the requirements for adjusting, measuring and recording the condition of the rope during and on completion of the installation. It provides the safety requirements and measures to reduce the effect of hazards to the rope and possible hazards from the rope to persons and equipment during these operations. It does not apply to installations for the transportation of goods, nor to inclined lifts.
Safety requirements for cableway installations designed to carry person - Ropes - Storage, transportation, installation and tensioning
- ICS
- 45.100
- CCS
- P52
- 发布
- 2004-10-27
- 实施
- 2004-10-27
This document specifies the general safety requirements applicable to the calculations for cableway installations designed to carry persons. This document is applicable to the various types of installations and takes into account their environment. This document contains: — general requirements for calculations and their presentation; — general requirements relating to the actions to be taken into account in the calculation of components as a basis for the requirements of the standards EN 13223, EN 13107, EN 12927 (Parts 1 to 6) and EN 1908; — requirements relating to verification of ropes by calculation; — requirements relating to the determination of the drive power; — requirements for the actions of the ropes and carriers on the support structures and for the deformations of these support structures. This document does not apply to installations for the transportation of goods nor to inclined lifts.
Safety requirements for cableway installations designed to carry persons - Calculations
- ICS
- 45.100
- CCS
- P52
- 发布
- 2004-10-27
- 实施
- 2004-10-27
This part of EN 12927 specifies the safety requirements applicable to maintaining, inspecting and repairing steel wire ropes and their related installations for passenger transportation by rope. It is essential to meet its requirements taking into account the various types of installation systems and their environment. Some requirements concern synthetic ropes. Requirements relating to the protection of workers are not included in this part of EN 12927. This part does not apply to installations for transportation of goods, nor to inclined lifts.
Safety requirments for cableways installations designed to carry persons - Ropes - Inspection, repair and maintenance
- ICS
- 45.100
- CCS
- P52
- 发布
- 2004-10-26
- 实施
- 2004-10-26
This part of EN 12927 specifies the safety requirements applicable to discard criteria for steel ropes for passenger transportation by rope. This standard is applicable to the various types of installations and takes into account their environment. This part of EN 12927 applies to all types of ropes and end fixing used in cableways for passenger transport. Some requirements concern synthetic ropes. Requirements relating to the protection of workers are not included in this part of EN 12927. This part of EN 12927 is not applicable to installations for the transportation of goods nor to inclined lifts.
Safety requirements for cableway installations designed to carry persons - Ropes - Discard criteria
- ICS
- 45.100
- CCS
- P52
- 发布
- 2004-10-26
- 实施
- 2004-10-26
This document specifies safety requirements for the mechanical and electrical devices of the drive system and other mechanical devices for cableway installations designed to carry persons. This standard is applicable to the various types of installations and takes into account their environment.This document applies to the design, production, installation, maintenance and operation of the mechanical and electrical devices of the drive system and other mechanical devices for cableway installations designed to carry persons.It includes requirements relating to the prevention of accidents and protection for workers.It does not apply to installations for the tr
Safety requirements for cableway installations designed to carry persons - Drive systems and other mechanical equipment
- ICS
- 45.100
- CCS
- 发布
- 2004
- 实施
This document specifies the safety requirements applicable toThe operation of installations for passenger transportation by rope.This standard is applicable toThe various types of installations and takes into accountTheir environment.This document applies toThe operation of an installation and toThe passenger transport conditions and also contains requirements for passengers.It is applicable to individual installations or a set of installations.It does not cover legal provisions forThe transport service nor transport obligationsIt includes requirements relating toThe prevention of accidents and protection for workers.It does not apply to installations forThe transportation of goods nor to inclined lifts.
Safety requirements for cableway installations designed to carry persons - Operation
- ICS
- 45.100
- CCS
- 发布
- 2004
- 实施
この規格は，特殊索道() (以下，索道という。)の制動機能をを試験する方法について規定する。注() ここでの特殊索道とは，いす式搬器(外部に開放された座席で構成されるいす式搬器をいう。)を使用して人を運送する索道をいう。
Braking test methods -- Chair lifts
- ICS
- 45.100
- CCS
- J81
- 发布
- 2002-08-26
- 实施
本标准规定了适用于水面宽500m、水深30m,流速5m/s、吊重400kg以下的中小型江河水文缆道测验设备及仪器的定义、分类、组成、型号命名、技术要求、试验方法、检验规则及标志、包装、运输、贮存等要求。
General specifications for equipment and instrument of hydrometric cableway measurements
- ICS
- 45.100
- CCS
- J81
- 发布
- 1999-10-22
- 实施
- 1999-12-01
本标准适用于GB/T 12739中所列各种规格的驱动机。
Circulating material ropeway.Drive.Specifications
- ICS
- 45.100
- CCS
- J81
- 发布
- 1999-06-28
- 实施
- 2000-01-01
本标准适用于JB/T 2790中所规定的各种规格的导向轮。
Circulating material ropeway.Sheave.Specifications
- ICS
- 45.100
- CCS
- J81
- 发布
- 1999-06-28
- 实施
- 2000-01-01
本标准适用于JB/T 2792中规定的各种规格的牵引拉紧装置。
Circulating material ropeway.Tension derice of hauling rope.Specifications
- ICS
- 45.100
- CCS
- J81
- 发布
- 1999-06-28
- 实施
- 2000-01-01
本标准适用于GB/T 12740中规定的DS型四连杆式货车。
Circulating material ropeway.Cars.Specifications
- ICS
- 45.100
- CCS
- J81
- 发布
- 1999-06-28
- 实施
- 2000-01-01
