47.020.10 船体及其构件 标准查询与下载

ASTM F1143-19(2024) 螺栓连接、凸起、油密和水密的人孔盖组件标准规范

Standard Specification for Manhole Cover Assembly, Bolted, Raised, Oiltight and Watertight

ASTM F1069-19(2024) 船用水密门、气密门/气密门和防风雨门的标准规范

Standard Specification for Doors, Watertight, Gastight/Airtight and Weathertight, Individually Dogged, for Marine Use

ASTM F1144-19(2024) 铰链式螺栓连接、半冲洗、油密和水密人孔盖组件的标准规范

Standard Specification for Manhole Cover Assembly, Bolted, Semi-Flush, Oiltight and Watertight, Hinged

T/CANSI 113-2023 船用扶手

本文件规定了船用扶手（简称扶手）的分类和标记、要求、试验方法、检验规则、标志、包装、运输、贮存。

Handrails of ships

T/QGCML 1905-2023 船用脚手架搭设及拆除技术规范

本文件规定了船用脚手架搭设及拆除的基本规定、脚手架材料、构配件基本要求、脚手架构造要求、脚手架搭设、脚手架拆卸、脚手架质量控制、脚手架材料管理要求、安全管理和安全要求。 本文件适用于船用脚手架的搭设及拆除。

Technical specifications for erection and dismantling of marine scaffolding

ISO 3796:2023 船舶和海洋技术 外部单扇门的清晰开口

Ships and marine technology — Clear openings for external single-leaf doors

T/CSNAME 069-2023 船用聚氨酯漂浮型护舷

本文件规定了船用聚氨酯漂浮型护舷(以下简称护舷)的结构、分类和标记、要求、试验方法、检验规则以及标志、包装、运输与贮存。 本文件适用于船用聚氨酯漂浮型护舷的设计、制造和检验。

Marine polyurethane floating fender

ASTM F3040/F3040M-13(2023) 非结构船用连接舱壁机械静载荷测试的标准测试方法

1.1  This test method covers a procedure for evaluating the strength of non structural marine joiner of A, B, and C-Class bulkhead and liner systems. A, B, and C-Class bulkheads are defined and discussed in 2.1 . 1.2  The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined. 1.3  This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4  This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Mechanical Static Load Testing of Non-Structural Marine Joiner Bulkheads

ASTM F1071-94(2023) 钢板网金属隔板的标准规范

1.1  This specification covers steel expanded-metal bulkhead panels suitable for use in storerooms, shops, and as protection against personnel hazards. 1.2  The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3  This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Expanded-Metal Bulkhead Panels

ASTM F1072-94(2023) 钢板网门标准规范

1.1  This specification covers steel expanded-metal doors suitable for installation in expanded-metal bulkheads, structural bulkheads, and structural arches. 1.2  The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3  This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Expanded-Metal Doors

ASTM F1385-07(2023) 货舱平台的标准实施规程

1.1  This practice covers design, construction, and installation criteria for platforms in cargo tanks. 1.2  Where platforms are attached to ladders see Figs. 1- 4 . FIG. 1 Cargo Platform—Bulkhead FIG. 2 Cargo Platform Elevation FIG. 3 Cargo Platform—Girder FIG. 4 Cargo Platforms Showing Typical Sections 1.3  The values stated in SI units are to be regarded as standard. The values given in parentheses after SI units are included for information only and are not considered standard. 1.4  This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5  This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Platforms in Cargo Tanks

ASTM F783-88(2023) 钉书钉、抓手、把手和马镫横档的标准规范

1.1  This specification covers design, construction for steel staples, handgrabs, handles, and individual stirrup rungs. 1.2  The staples, handgrabs, and handles depicted in this specification are for use on steel structures including all parts of ships' structure as necessary. The individual stirrup rungs are for use on bulkheads or structure as deemed necessary. 1.3  The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4  This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Staple, Handgrab, Handle, and Stirrup Rung

ASTM F985-18(2023) 试点平台标准规范

1.1  This specification covers design and construction details for pilot platforms. 1.2  The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3  This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Pilot Platform

ASTM F1068-90(2023) 船用双门、气密/气密、独立门锁的标准规范

1.1  This specification, to be used in conjunction with Specification F1073 , covers the principal dimensions and the mechanical requirements for manufacturing steel and aluminum individually dogged, airtight/gastight double doors for personnel access through bulkheads, complete with frames, intended to maintain the structural and the air and gas tightness integrity of the bulkheads. 1.2  The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3  The following precautionary caveat pertains only to the Test Methods portion, Section 6 , of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4  This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Doors, Double, Gastight/Airtight, Individually Dogged, for Marine Use

ASTM F821/F821M-23 船用内部钢制家用门和框架标准规范

1.1 This specification covers the construction of standard and custom-built interior steel doors and frames for ships including U.S. Coast Guard certificated vessels with domestic routes. 1.2 Doors and frames are to be hollow metal construction with the door insulated for sound or fire. 1.3 The doors are intended for use in staterooms, lavatories, passageways, and other areas protected from weather. 1.4 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Domestic Use Doors and Frames, Steel, Interior, Marine

ISO/DIS 3796 船舶和海洋技术 外部单扇门的清晰开口

Ships and marine technology — Clear openings for external single-leaf doors

ISO/FDIS 3796:2023 船舶和海洋技术 外部单扇门的清晰开口

Ships and marine technology — Clear openings for external single-leaf doors

T/NESIF 0020-2022 玻璃钢渔船船体成型缺陷检测及维修方法

检测及维修方法

Detection and repair method of hull forming defect of FRP fishing boat

T/NESIF 0023-2022 玻璃钢渔船球鼻艏结构制作技术要求

制作技术要求

Technical requirements for the fabrication of bulbous bow structures of FRP fishing boats

T/NESIF 0018-2022 玻璃钢渔船尾框底骨安装技术要求

安装技术要求

Technical requirements for the installation of the bottom frame of the stern frame of the FRP fishing boat