47.020.10 船体及其构件 标准查询与下载

BS ISO 23121-2:2019 船舶和海洋技术 防止船舶进水的充气浮力支持系统 浮力室

What is ISO 23121-2 - Buoyancy chamber of Inflatable buoyancy support systems about?    ISO 23121-2 is the second part of the ISO 23121-1 series of standards that specifies general requirements, the materials and test methods for the buoyancy chamber of inflatable buoyancy support systems, which serve residual buoyancy for damaged ships not to sink or capsize, and which can be installed in machinery spaces and/or cargo holds.   Who is ISO 23121-2 -   Buoyancy chamber of Inflatable buoyancy support systems for?  

Ships and marine technology. Inflatable buoyancy support systems against flooding of ships - Buoyancy chamber

BS ISO 23121-1:2019 船舶和海洋技术 防止船舶进水的充气浮力支持系统 供气系统

What is ISO 23121-1 - Gas supply system of Inflatable buoyancy support systems about? ISO 23121-1 is the first part of the ISO 23121-1 series of standards that specifies general requirements, the installation, and the activation of the gas supply system of inflatable buoyancy support systems.  Inflatable buoyancy support systems serves as residual buoyancy for damaged ships not to sink or capsize and can be installed in machinery spaces and/or cargo holds. ISO 23121-1 is intended to ensure the functions of the gas supply system, which uses a gas media, such as an asphyxiant, to inflate the buoyancy chamber of the inflatable buoyancy support systems. Who is ISO 23121-1 - Gas supply system of Inflatable buoyancy support systems for ? ISO 23121-1 on gas supply system is useful for: Inflatable buoyancy support systems manufacturers Inflatable buoyancy support systems install...

Ships and marine technology. Inflatable buoyancy support systems against flooding of ships - Gas supply system

KS V ISO 8468-2019 船舶和海洋技术 船舶驾驶台布局和相关设备 要求和指南

Ships and marine technology — Ship’s bridge layout and associated equipment — Requirements and guidelines

KS V 2342-2019 小型船舶用风雨密/非风雨密钢门

Weathertight / Non-weathertight steel doors for small ship

ISO 23121-2:2019 船舶和海洋技术.防止船舶浸水的充气浮力支撑系统.第2部分:浮力室

This document specifies general requirements, the materials and test methods for the buoyancy chamber of inflatable buoyancy support systems, which serve residual buoyancy for damaged ships not to sink or capsize, and which can be installed in machinery spaces and/or cargo holds.

Ships and marine technology — Inflatable buoyancy support systems against flooding of ships — Part 2: Buoyancy chamber

ISO 23121-1:2019 船舶和海洋技术.防止船舶浸水的充气浮力支撑系统.第1部分:供气系统

This document specifies general requirements, the installation and the activation of the gas supply system of inflatable buoyancy support systems, which serve residual buoyancy for damaged ships not to sink or capsize, and which can be installed in machinery spaces and/or cargo holds. It is intended to ensure the functions of the gas supply system, which uses a gas media, such as an asphyxiant, to inflate the buoyancy chamber of the inflatable buoyancy support systems.

Ships and marine technology — Inflatable buoyancy support systems against flooding of ships — Part 1: Gas supply system

T/CANSI 13-2019 海洋平台结构焊缝缺陷修补工艺要求

本标准规定了海洋平台结构焊缝修补的工艺准备、工艺要求、工艺过程及检验。 本标准适用于海洋工程用的一般强度结构钢、高强度结构钢、超高强度结构钢的焊缝缺陷修补。

Technical requirements of hull structure steel welds repair in offshore platform

ASTM F1092-19 玻璃纤维（GRP）拉挤露天风雨和防护、方形栏杆系统的标准规范

1.1 This specification provides the material requirements, construction, installation, and testing requirements for openweather deck, storm-and-guard, fiberglass square railing systems. Components are to be manufactured by the pultrusion process. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 The following safety hazards caveat pertains only to the test methods portion, Section 9, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Fiberglass (GRP) Pultruded Open-Weather Storm and Guard, Square Railing Systems

ASTM F1142-19 人孔盖组件 螺栓 半冲洗 过滤和防水标准规范

1.1 This specification provides design and construction criteria for a semi-flush, oiltight and watertight bolted manhole cover assembly. 1.2 The manhole cover assembly depicted in this specification is for use in decks or bulkheads requiring oiltight and watertight covers that are not required to be completely flush. Manhole cover assemblies shall be complete with covers, mounting rings, gaskets, welded studs, washers, and nuts. 1.3 Handles, if required, shall be as specified in the ordering information. 1.4 This specification is not applicable to certain hazardous cargos (see Section 46 CFR 153.254 and 46 CFR 154.340). 1.5 This specification provides design and construction for manhole cover assemblies subjected to lateral pressures such as resulting from vehicle loads or hydrostatic pressures. Where manhole cover assemblies are subjected to primary or cyclic loads, other reinforcement or construction criteria may be necessary to integrate the manhole assembly with the required structural reinforcement for openings in decks or bulkheads. Design of the manhole cover assembly for primary or cyclic loads is beyond the scope of this specification. 1.6 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Manhole Cover Assembly, Bolted, Semi-Flush, Oiltight and Watertight

KS V 2344-2019 船舱钢质空心门

Ship’s cabin steel hollow doors

KS V 0021-2019 造船术语表（船体部分 基本设计）

Glossary of terms for shipbuilding(Hull part — Basic design)

KS V ISO 6042-2019 船舶和海洋技术 风雨密单扇钢门

Ships and marine technology — Weathertight single-leaf steel doors

ASTM E1317-19 表面处理易燃性的标准试验方法

1.1 This fire-test-response standard covers a procedure for measuring fire properties associated with flammable behavior of surface finishes used on noncombustible substrates (Note 1). In particular, these include surface finishes intended for use as surfacing materials and ceiling veneers including any adhesives used to fasten the veneers to ceilings, paints, and exposed treatment of insulating materials. NOTE 1—This test method was originally developed to closely follow the test procedure of IMO Resolution A.653(16) (1).2 ISO 5658-2 also describes similar test equipment. The test procedure used by IMO for regulation of surface finishes is IMO 2010 FTP Code Part 5 (2), which has replaced IMO Resolution A.653(16). 1.2 Tests performed according to this test method are intended to yield fire properties that, when appropriately interpreted, are potentially useful to select materials and surface treatments that will limit the rapid growth and spread of fire. 1.3 This test method requires a specific range of specimen radiant thermal exposure for measuring fire properties. 1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.5 This standard is used to measure and describe the response of materials, products, or assemblies to heat and flame under controlled conditions, but does not by itself incorporate all factors required for fire hazard or fire risk assessment of the materials, products, or assemblies under actual fire conditions. 1.6 Fire testing is inherently hazardous. Adequate safeguards for personnel and property shall be employed in conducting these tests. 1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see Section 7. 1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Flammability of Surface Finishes

ASTM F1070-19 船用非密封门的标准规范

1.1 This specification to be used in conjunction with Specification F1073, covers the principal dimensions and the mechanical requirements for manufacturing steel, aluminum, and glass-reinforced plastic non-tight, personnel doors and dutch doors, with the exception of joiner, joiner dutch doors, and expanded metal doors, for marine use. 1.2 The doors will be used in non-tight bulkheads. 1.3 When fire protection requirements are applicable to the location of these doors, then the use of aluminum and glassreinforced plastic doors shall be unacceptable. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Doors, Non-Tight, for Marine Use

ASTM F1143-19 螺栓连接、凸起、油密和水密的人孔盖组件的标准规范

1.1 This specification provides design and construction criteria for a raised, bolted, oiltight and watertight manhole cover assembly. 1.2 The manhole cover assemblies depicted in this specification are for use in decks or bulkheads in which the manhole cover assemblies must be of the raised type. Manhole cover shall be complete with coaming, gasket, welded studs or bolts, washers, and nuts. 1.3 Determination of the use of handles will be as specified in the ordering information. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.5 This specification is not applicable to certain hazardous cargos (see 46 CFR 153.254 and 46 CFR 154.340). 1.6 This specification provides design and construction for manhole cover assemblies subjected to lateral pressures such as resulting from vehicle loads or hydrostatic pressures. Where manhole cover assemblies are subjected to primary or cyclic loads, other reinforcement or construction criteria may be necessary to integrate the manhole assembly with the required structural reinforcement for openings in decks or bulkheads. Design of the manhole cover assembly for primary or cyclic loads is beyond the scope of this specification. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Manhole Cover Assembly, Bolted, Raised, Oiltight and Watertight

ASTM F1197-19 滑动防水门控系统标准规范

1.1 This specification covers the design, manufacture, and testing of controls and operating mechanisms for use with sliding watertight doors meeting the requirements of Specification F1196. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Sliding Watertight Door Control Systems

ASTM F1144-19 螺栓连接半冲洗油密和水密铰链式人孔盖组件的标准规范

1.1 This specification provides design and construction criteria for a semi-flush, oiltight and watertight bolted hinged manhole cover assembly. 1.2 The manhole cover assemblies depicted on this specification are for use in decks or bulkheads requiring oiltight and watertight covers that are not required to be completely flush. Manhole cover assemblies shall be complete with covers, mounting rings, gaskets, studs, washers, hinge assemblies, and nuts. 1.3 Handles, if required, shall be as specified in the ordering information. 1.4 Values stated in inch-pound units are to be regarded as standard. 1.5 This standard is not applicable to certain hazardous cargos. (See 46 CFR 153.254 and 46 CFR 154.340.) 1.6 This specification provides design and construction for manhole cover assemblies subjected to lateral pressures such as resulting from vehicle loads or hydrostatic pressures. Where manhole cover assemblies are subjected to primary or cyclic loads, other reinforcement or construction criteria may be necessary to integrate the manhole assembly with the required structural reinforcement for openings in decks or bulkheads. Design of the manhole cover assembly for primary or cyclic loads is beyond the scope of this specification. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Manhole Cover Assembly, Bolted, Semi-Flush, Oiltight and Watertight, Hinged

ASTM F1073-19 船用水密/气密/气密、防风雨和非密封门用门配件的标准规范

1.1 This specification covers the principal design and type of material for manufacturing fittings for watertight/gastight/ airtight, weathertight, and non-tight doors, for marine use. Note that “gastight” is commercial terminology which also means “airtight” in naval terminology. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 The fittings are intended for use on all doors for marine use, except joiner and expanded metal doors. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Door Fittings, for Watertight /Gastight /Airtight, Weathertight, and Non-Tight Doors, for Marine Use

ASTM F1069-19 船用防水气密和防风雨门的标准规范

1.1 This specification, to be used in conjunction with Specification F1073, covers the principal dimensions and the mechanical requirements for manufacturing steel, aluminum, and glass-reinforced plastic, individually dogged, watertight, gastight/airtight, and weathertight doors, for personnel access through bulkheads, complete with frames, for marine use intended to maintain the structural and tightness integrity of bulkheads. 1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 The following safety hazards caveat pertains to the test method portion, Section 8, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Doors, Watertight, Gastight/Airtight and Weathertight, Individually Dogged, for Marine Use

BS ISO 5894:2018 船舶和海洋技术 带螺栓盖的人孔

What is this standard about? This document specifies requirements for watertight and oiltight manholes of the current types with bolted covers, for general shipboard use other than for pressure vessels. It specifies the dimensions for the holes in the plating and the number, size and position of the fasteners. It is applicable to manholes of raised coaming, surface mounted or recessed cover types. The details of the manholes are at the discretion of the manufacturer.

Ships and marine technology. Manholes with bolted covers