47.020.30 管路系统 标准查询与下载

GB/T 2030-1980 青铜吸入通海阀

青铜吸入通海阀

Bronze suction valve for seaward sluice

GB/T 2029-1980 铸钢吸入通海阀

铸钢吸入通海阀

Cast steel suction valve for seaward sluice

GB/T 1953-1984 船用低压外螺纹青铜截止止回阀

船用低压外螺纹青铜 截止止回阀

Marine low pressure bronze male threaded stop check valves

GB/T 1952-1980 船用低压外螺纹青铜止回阀

船用低压外螺纹青铜止回阀

Low pressure bronze male screw-thread check valve for marine use

GB/T 598-1980 船用外螺纹青铜填料旋塞

船用外螺纹青铜填料旋塞

Marine bronze external screwed packed cocks

GB/T 569-1965 船用法兰连接尺寸和密封面

本标准适用于GB568-65所规定的船舶管路法兰。 本标准亦适用于船用设备与管子或附件相连接的法兰。

Marine pipe flanges--Connection dimensions and mating face

GB/T 568-1965 船用法兰类型

本标准适用于普通的船舶管路法兰。 本标准不适用于输送有毒或爆炸性介质及有特殊要求的船舶管路法兰。

Marine pipe flanges--Types

T/GDIOT 007-2024 半潜运输装备压排载管道超声检测技术规范

本文件规定了半潜运输装备压排载管道中无缝钢管、焊接钢管和PE管超声检测的一般要求、检测设备和器材、检测实施、缺陷评定和检测报告等规范。

Technical specifications for ultrasonic testing of pressure and discharge pipelines for semi-submersible transportation equipment

24/30461207 DC ISO 17579 船舶和海洋技术 气动快关阀的设计与试验要求

ISO 17579 Ships and marine technology. Design and testing requirements of pneumatic quick-closing valves

T/CANSI 146-2024 船用阀门远程机械传动装置

本标准规定了船用阀门远程机械传动装置（简称远传装置）的分类、要求、试验方法、检验规则及标志、包装、运输和储存。

Marine valve mechanical remote Transmission device

T/CANSI 147-2024 船用阀门安全机械连锁装置

本文件规定了船用阀门安全机械联锁装置的分类、要求、试验方法、检验规则、标志、包装、运输和贮存。

Marine valve safety mechanical interlock device

T/QGCML 2437-2023 船舶用高压截止阀

本文件规定了船舶用高压截止阀的术语和定义、型号、技术要求、试验方法、检验规则、标志、包装、运输及贮存。 本文件适用于船舶用高压截止阀的生产与检验。

High pressure stop valve for ships

T/CSNAME 075-2023 船用塑料管

本文件规定了船用聚乙烯PE100、聚丙烯塑料管（简称塑料管）的分类、要求、检验规则和标志、包装、运输、贮存。 本文件适用于船舶及海洋工程生活用给排水、压载水、舱底水、空调冷热水等系统的塑料管设计和制造。

marine plastic pipe

T/GDIOT 007-2023 半潜运输装备压排载结构超声检测技术规范

标准规定了半潜运输装备压排载结构中无缝钢管、焊接钢管和PE管超声检测的一般要求、检测设备和器材（包括超声相控阵检测仪及相控阵探头、超声导波检测仪及导波探头）、检测实施、缺陷评定和检测报告等内容。

Technical specifications for ultrasonic testing of pressure and discharge structures of semi-submersible transportation equipment

ISO/CD 17579:2023 船舶与航海技术 气动快关阀的设计和试验要求

Ships and marine technology — Design and testing requirements of pneumatic quick-closing valves

BS ISO 5483:2023 船舶和海洋技术 油箱和水箱的排水设施

Ships and marine technology. Drain facilities from oil and water tanks

ISO 5483:2023 船舶和海洋技术 油箱和水箱的排水设施

Ships and marine technology — Drain facilities from oil and water tanks

ASTM F1030-86(2023) 阀门操作器选择的标准实施规程

1.1 This practice provides guidance in the selection of manual and power-actuated valve operators. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Selection of Valve Operators

ASTM F1548-01(2023) 管道应用中与带垫圈的机械联轴器一起使用的配件性能标准规范

1.1 This specification defines classification, materials, test requirements, inspection certification, marking and packaging of fittings for use with gasketed mechanical couplings complying to Specification F1476. 1.2 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications

ASTM F1511-18(2023) 船用泵用机械密封件标准规范

1.1 This specification covers mechanical end-face seals for centrifugal and positive displacement pumps for shipboard use. 1.2 The following types of seals are not included in this specification: lip seals, oil seals, circumferential seals, or labyrinth seals. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. A companion hard metric standard is in the process of preparation. 1.4 Special requirements for U.S. Navy Shipboard Pump Applications are included in Supplement S1. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Mechanical Seals for Shipboard Pump Applications