47.020.80 起居舱室 标准查询与下载

CB/T 551-2008 船用金属桌型式尺寸

本标准规定了船用金属桌的分类、要求、试验方法、检验规则和标志、包装、运输、储存等。 本标准适用于金属结构的各种船用桌。

Marine type and dimension of metal table

CB/T 550-2008 船用金属吊床和柜床型式尺寸

本标准规定了船用金属吊床和柜床的分类、要求、试验方法、检验规则和标志、包装和运输。 本标准适用于船用金属吊床和柜床。

Marine type and dimension of metal hanging bed and bed

ASTM F1085-08a 海上船只铺位用床垫及包布床弹簧的标准规范

1.1 This specification provides the requirements for mattresses and box springs that are for use in berths for officers, crew, and passengers in marine vessels. This shall be considered a minimum standard. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses, in inch-pound units, are for information only. 1.3 This standard is used to measure and describe the response of materials, products, or assemblies to heat and flame under controlled conditions, but does not by itself incorporate all factors required for fire-hazard or fire-risk assessment of the materials, products, or assemblies under actual fire conditions. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Mattress and Box Springs for Use in Berths in Marine Vessels

ASTM F1085-03a(2007) 用于船舶泊位的床垫和弹簧弹簧的标准规范

Standard Specification for Mattress and Box Springs for Use in Berths in Marine Vessels

DIN 81300-3:2007 造船用门锁.第3部分:安装尺寸和安装

Door locks used in shipbuilding - Part 3: Fitting dimensions and installation

DIN 81300-2:2007 造船用门锁.第2部分:交货技术条件

Door locks used in shipbuilding - Part 2: Technical terms for delivery

DIN 81421-2:2007 设备的弓形把手.第2部分:焊接类型

Strap-shaped handles for equipment - Part 2: Type for welding

DIN 81300-1:2007 造船用门锁.第1部分:技术概况

Door locks used in shipbuilding - Part 1: Technical survey

KS V ISO 3827-5-2005(2010) 船舶舱室尺寸的协调第5部分:关键部件的协调尺寸

Co－ordination of dimensions in ships’ accommodation－Part 5：Co－ordinating sizes for key components

DIN 81314:2004 船用门锁的锁舌片和锁角

Strike-plates and strike-nooks depending on this project are for door locks on ships. The project will contains measures and the material the strike-plates and strike-nooks.

Strike-plates, strike-nooks for door locks used on ships

JT/T 247-2004 内河船舶手摇矩形窗

本标准规定了内河船舶手摇矩形窗的分类、结构、规格系列、标记、部件和技术要求等。 本标准适用于内河船舶不需要风雨密或气密的部位。

Hand-opened rectangular windows for inland-waterway vessels

DIN 81318:2003 船用推拉门锁把手

Handles for sliding-doors for door looks used on ships

DIN 81313:2003 船用门锁钥匙坯料

Key-blanks depending on this standard are for door-looks on ships. The standard contains the connecting measures and the material the key-blanks consists.

Key-blanks for door-locks on ships

DIN 81310:2003 船上推拉门带钩头弹簧闩的弹簧锁

Rim-locks depending on this standard are for sliding-doors on ships. The standard contains the connecting measures and the material the locks consists.

Rim-locks with hook latch-bolt for sliding doors on ships

DIN 81309:2003 船上厕所和浴室折叠门带弹簧闩的弹簧锁

Rim-locks depending on this standard are for hinged doors of lavotery and bath on ships. The standard contains the connecting measures and the materials the locks consists.

Rim-locks with latch-bolt for hinged doors of lavatory and bath on ships

DIN 81308:2003 船上折叠门无弹簧闩弹簧锁

Rim-locks without latch-bolt depending on this standard are for hinged doors on ships. The standard contains the connecting measures and the materials the locks consitsts.

Rim-locks without latch-bolt for hinged doors on ships

DIN 81307:2003 船上折叠门带锁闩弹簧锁

Rim-locks depending on this standard are for hinged doors on ships. The standard contains the connecting measures and the materials the locks consitsts.

Rim-locks with latch-bolt for hinged doors on ships

ASTM F1085-03e1 用于船舶泊位的床垫和弹簧弹簧的标准规范

Standard Specification for Mattress and Box Springs for Use in Berths in Marine Vessels

DIN 81305:2003 船舶用旋转门插锁

Mortise-locks depending an this standard for swinging doors on ships. The project will contains the connection measures and the materials the locks consists.

Mortise-locks for swinging-doors on ships

DIN 81303:2003 船舶用厕所和浴室的铰链门插锁

Mortise-locks depending on this standard are for hinged doors of lavotery and bath on ships. The project will contains the connecting measures and the materials the locks consists.

Mortise-locks for hinged doors of lavatory and bath on ships