47.020.80 起居舱室 标准查询与下载

DIN 81304:2003 船舶用推拉门插锁

Mortise-locks depending on this standard are for sliding-doors on ships. The project will contains the connecting measures and the material the locks consists.

Mortise-locks for sliding-doors on ships

DIN 81306:2003 船舶用铰链门无销插锁

Mortise-locks without bolt depending an this standard are for hing doors an ships. The project will contains the connecting measures and the materials the locks consists.

Mortise-locks without bolt for hinged doors on ships

DIN 81303:2003 船舶用厕所和浴室的铰链门插锁

Mortise-locks depending on this standard are for hinged doors of lavotery and bath on ships. The project will contains the connecting measures and the materials the locks consists.

Mortise-locks for hinged doors of lavatory and bath on ships

DIN 81301:2003 船舶用铰链门带碰簧销的插锁

Mortise-locks depending on this standard are for hinged doors on ships. The project will contains the connecting measures and the materials the locks consitsts.

Mortise-locks with latch-bolt for hinged doors on ships

HJB 256-2002 舰船舱室内部装饰要求

Requirements for interior decoration of ship cabins

ASTM F782-95 船用门、家具的标准规范

1.1 This specification covers the construction of furniture doors for use where invoked by other marine furniture specifications. 1.2 This specification applies to all furniture doors for marine furniture, in items requiring hinged doors. 1.3 Values stated in inch-pound units are to be regarded as the standard. The metric equivalents, given in parentheses, are for information only.

Standard Specification for Doors, Furniture, Marine

ANSI/ASTM F782:2001 船用家具门规范

This specification covers the construction of furniture doors for use where invoked by other marine furniture specifications. This specification applies to all furniture doors for marine furniture, in items requiring hinged doors. Values stated in inch-pound units are to be regarded as the standard. The metric equivalents, given in parentheses, are for information only.

Specification for Doors, Furniture, Marine

CNS 14344-1999 船用钢质风雨密门（方角型）装具

本标准适用于船舶风雨密舱壁出入口上钢质风雨密门（方角型）之附属装具。但其缘围部分应详如 CNS l4287〔船用钢质风雨密门（方角型）〕之图 4。

Fittings for weathertight steel doors (Rectangular corner type)+D37

CNS 14287-1998 船用钢质风雨密门﹝方角型﹞

本标准适用于船长（L）在 80 公尺以上船舶之艛端舱壁与甲板室围壁等处出入口之方角型船用钢质风雨密门。以下简称为门。备考：船长（L）之定义依船舶载重线勘划规则之规定。

Ships' steel weathertight doors (Square corner type)

ANSI/ASTM F1245:1997 船用压缩和自闭型单式与双式水龙头规范

This specification covers single and double compression and self-closing faucets for shipboard plumbing installations. The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only. The following precautionary caveat pertains only to the test methods portion, Section 10, of this standard. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Specification for Faucets, Single and Double, Compression and Self-Closing Type, Shipboard

CB/T 3723-1995 船用卫生单元

本标准规定了船用卫生单元的产品分类、技术要求、试验方法、检验规则、标志、包装、运输和贮存要求。 本标准规定的卫生单元，适用于各类船舶和海上建筑物。

ship sanitary unit

CB/T 3280-1994 壁柜式床

本标准规定了壁柜式床的产品分类、技术要求、试验方法及检验规则等。 本标准适用于舱室净高度1900mm以上的舰船、渔船及小型船舶的壁柜式床。

wall cabinet bed

CB/T 3662-1994 复合岩棉板耐火舱室系统技术条件

本标准规定了复合岩棉板耐火舱室系统技术条件。 本标准适用于民用船舶海洋工程建筑物具有耐火分隔要求的居住舱室和工作舱室，可作为复合岩棉板耐火舱室系统的安装和验收的依据。

Composite rock wool board fire-resistant cabin system technical requirements

ASTM F1085-88(1994)e1 床垫和箱形弹簧、铺位的标准规范

Standard Specification for Mattress and Box Springs, Berths

ANSI/ASTM F826:1994 顶盖、家具船用钢规范

This specification covers the construction of steel furniture tops for use where invoked by other marine furniture specifications. This specification applies to tops for furniture case goods only such as chests of drawers, log desks with cabinets, and so forth. The values stated in inch-pound units are to be regarded as the standard. The metric equivalents, given in parentheses, are provided for information only.

Specification for Tops, Furniture, Marine, Steel

CB/T 3483-1993 船用舱室家具技术条件

本标准规定了船用舱室家具的技术要求、试验方法和检验规则等。 本标准适用于木质、金属和代木材料及各种结构型式的船用舱室家具。

Specifications for marine cabin furniture

CB/T 3602-1993 舱室家具安装质量要求

本标准规定了舱室内木质、金屑家具安装的质量要求。 本标准适用于船舶起居舱室、公共处所、工作舱室等家具的安装。

Cabin furniture installation quality requirements

CB 836-1993 水密污物桶

本标准规定了水密污物桶的产品分类、技术要求、试验方法和检验规则。 本标准适用于潜艇盛放污物的桶。

watertight dirt bucket

CB/T 3518.5-1992 复合岩棉板耐火舱室 塑料装饰件

本际准规定了复合岩棉板耐火舱室塑料装饰件的分类、技术要求，试验方法和检险规则等。 本标准适用于复合岩棉板耐火舱室灼踢脚板和天花板嵌条。

Composite rock wool board refractory cabin plastic decoration

CB 456-1992 蒸汽热水柜

本标准规定了蒸汽热水柜的分类、技术要求、试验方法、检验规则、包装与贮存要求等。 本标准适用于船舶及钻井平台上生活用淡水管系中用蒸汽加热的热水柜。

Steam hot water tank