47.020.90 船用通风、空气调节和供热系统 标准查询与下载

KS V 7749-2020 船用通风机的船上测试程序

On-board test procedure for ventilation fan for marine use

KS V ISO 8863-2019 船舶驾驶室窗户 通过玻璃板的热空气加热

Ship's wheelhouse windows — Heating by hot air of glass panes

KS V ISO 8864-2019 船舶驾驶室空调与通风设计条件及计算依据

Air-conditioning and ventilation of wheelhouse on board ships — Design conditions and basis of calculations

KS V ISO 8862-2019 船舶机械控制室的空调和通风 设计条件和计算依据

Air-conditioning and ventilation of machinery control-rooms on board ships — Design conditions and basis of calculations

CB/T 4434-2019 油船惰性气体系统技术条件

Specifications for oil tanker inert gas system

KS V 7510-2019 船舶矩形风管配件及导叶设计标准

Design standard of fittings and guide vanes for rectangular duct of ships

T/CANSI 2-2018 船用锅炉原材料入厂检验

本标准规定了船用锅炉受压元件用的钢板、钢管、锻钢、圆钢及焊接材料等主要原材料入厂检验的 一般要求、抽样要求、检验方法与检验规则。

Receiving inspection of raw materials for marine boilers

CB/T 4444-2017 船用菌形通风筒

marine mushroom ventilator

DIN EN ISO 11105/A100:2017 小艇. 汽油发动机和/或油箱舱的通风(ISO 11105:1997)；德文版本EN ISO 11105:2017；A100修正案

The document specifies requirements for ventilation of petrol engine and petrol tank compartments in small craft of up to 24 m length of hull, having petrol engines for propulsion, electrical generation or mechanical power, to prevent accumulation of explosive gases in these compartments. Personal watercraft are not covered.

Small craft - Ventilation of petrol engine and/or petrol tank compartments (ISO 11105:1997); German version EN ISO 11105:2017; Amendment A100

CB/T 4415-2015 船用螺旋风管及附件

本标准规定了船用螺旋风管及其附件(简称螺旋风管及其附件)的分类和标记、要求、试验方法、检验规则、标志、包装、运输和贮存。本标准适用于船用螺旋风管及其附件的设计、制造和验收。

Marine spiral duct

DIN 82341:2015 船舶通风系统. 蘑菇形通风筒罩

Ventilation systems on ships - Mushroom ventilator cowls

DIN 82342:2015 船舶通风系统. 排风机罩

Ventilation systems on ships - Discharge ventilator cowls

DIN 82340:2015 船舶通风系统. 鹅颈管通风机

Ventilation systems on ships - Swan-neck ventilators

DIN 82330:2015 船舶通风系统. DN 100至DN 1800的圆法兰

Ventilation systems on ships - Round flanges DN 100 to DN 1800

DIN 82331:2015 船舶上的通风系统.符合DIN 82330的圆形法兰盘用密封垫

Ventilation systems on ships - Gaskets for round flanges according to DIN 82330

GSO ISO 8864:2015 船舶驾驶室的空调和通风 设计条件和计算基础

This International Standard specifies design conditions and suitable methods of calculation for air-conditioning and ventilation of the wheelhouse on board seagoing merchant ships for all conditions except those encountered in extremely cold or hot climates (i.e. with a lower or higher enthalpy than that stated in 4.1). It applies to a wheelhouse supplied with air-conditioning and ventilation either by the general accommodation system or by its own individual system. The annex provides guidance and details of good practice in the design of ventilation and air-conditioning systems for the wheelhouse in ships. NOTE — Users of this International Standard should note that, while observing the requirements of the Standard, they should at the same time ensure compliance with such statutory requirements, rules and regulations as may be applicable to the individual ship concerned.

Air-conditioning and ventilation of wheelhouse on board ships -- Design conditions and basis of calculations

GSO ISO 9943:2015 造船 小厨房和带烹饪用具的自助餐厅的通风和空气处理

This International Standard specifies the design requirements and general considerations for the ventilation and air-treatment of galleys and pantries with cooking appliances onboard merchant seagoing ships, when such ventilation and air-treatment is specified by the shipowner. It applies for normal conditions in all waters except those encountered in extremely cold or hot climates (i.e. with a lower or higher temperature than those stated in 4.3 and 4.4). For the purposes of this International Standard, pantries with cooking appliances, referred to above, are those which contain appliances consuming more than the small amount of electrical power needed for coffee urns, hot-plates for keeping food warm, electric water boilers, etc. NOTE Users of this International Standard should note that, while observing its requirements, they should at the same time ensure compliance with such statutory requirements, rules and regulations as may be applicable to the individual ship concerned.

Shipbuilding -- Ventilation and air-treatment of galleys and pantries with cooking appliances

GSO ISO 9785:2015 船舶和航海技术 装有内燃机的车辆运行的货舱通风 所需总理论气流的计算

This International Standard specifies methods of calculating the theoretical quantity of outdoor air required in cargo spaces of ships where vehicles with internal combustion engines are driven, in order to dilute the polluted air to within the permitted occupational exposure limits. Annex A specifies average values of the amounts of pollutants in exhaust gases from vehicles with internal combustion engines driven in cargo spaces in ships. Annex В gives general information and guidance as to good practice for the ventilation of cargo spaces in ships where vehicles with internal combustion engines may be driven. Users of this International Standard should note that, while observing the requirements of the standard, they should at the same time ensure compliance with such statutory requirements, rules, and regulations as may be applicable to the individual ship concerned. Users should also refer to guidelines developed by the International Maritime Organization (IMO) contained in the Maritime Safety Committee Circular 729 (MSC Circ. 729), Guidelines and Recommendations for Ventilation systems in RO-RO Cargo Spaces.

Ships and marine technology -- Ventilation of cargo spaces where vehicles with internal combustion engines are driven -- Calculation of theoretical total airflow required

GSO ISO 9099:2015 船上干粮室的空调和通风设计条件和计算依据

This International Standard specifies design conditions and suitable methods of calculation for air-conditioning and ventilation of dry provision rooms on board seagoing merchant ships, when specified by the shipowner. It applies for all conditions except those encountered in extremely hot climates (i.e. with a higher enthalpy than that stated in 4.2). NOTE — Users of this International Standard should note that, while observing the requirements of the Standard, they should at the same time ensure compliance with such statutory requirements, rules and regulations as may be applicable to the individual ship concerned.

Air-conditioning and ventilation of dry provision rooms on board ships -- Design conditions and basis of calculations

GSO ISO 8861:2015 造船 柴油动力船舶机舱通风 设计要求和计算依据

This International Standard specifies design requirements and suitable calculation methods for the ventilation of the engine room in diesel-engined ships, for normal conditions in all waters. Annex A provides guidance and good practice in the design of ventilation systems for ships' engine rooms. NOTE— Users of this International Standard should note that, while observing the requirements of the standard, they should at the same time ensure compliance with such statutory requirements, rules and regulations as may be applicable to the individual ship concerned.

Shipbuilding -- Engine-room ventilation in diesel-engined ships -- Design requirements and basis of calculations