47.080 小型船 标准查询与下载

GSO ISO 8848:2023 小型船舶 远程机械转向系统

This document specifies design, construction, installation and test requirements for remote mechanical cable steering systems and the output ram interface point to rudders, jet drives, outboard and sterndrive engines for small craft. It is applicable to three distinct classes of steering systems for use on various types of craft: —    standard duty steering systems, for small craft with single and twin installations of outboard engines with a total over 15 kW power, and with rudders, sterndrives and water-jet drives; —    light duty steering systems, for small craft with a single outboard engine of 15 kW to 40 kW power; —    mini-jet steering systems, excluding personal watercraft. NOTE      Standard and light duty steering systems are mechanically interchangeable. A standard duty steering system can be used on a craft designed for a light duty system. However, a light duty steering system cannot be used on a craft that requires a standard duty steering system. Mini-jet steering systems are mechanically differentiated from the previously mentioned systems and can only be used on mini-jet craft as defined in this document. This document does not address emergency means for steering the craft.

Small craft — Remote mechanical steering systems

GSO ISO 23411:2023 小艇 方向盘

This document specifies design and testing requirements for steering wheels for small craft.

Small craft — Steering wheels

GSO ISO 8099-1:2023 小型船舶 废物系统 第1部分：废水滞留

ISO 8099-1:2018 specifies requirements for the design, construction and installation of systems for temporary retention of sewage for subsequent disposal. It applies to small craft with a length of hull (LH) of up to 24 m. ISO 8099-1:2018 does not address waste water treatment systems.

Small craft — Waste systems — Part 1: Waste water retention

GSO ISO 8099-2:2023 小型船舶 废物系统 第2部分：污水处理系统

This document specifies requirements for the design, construction and installation of sewage treatment systems on small craft. It does not address waste retention systems, nor accidental discharge prevention of pollutants (e.g. oil, fuel) overboard. It does not address the technical discharge limits of a sewage treatment unit, subject to certain international as well as national regulations.

Small craft — Waste systems — Part 2: Sewage treatment systems

GSO ISO 14946:2023 小型船只 最大负载能力

This document specifies the items included in the maximum load of small craft, without exceeding the limits set by other ISO standards for stability, freeboard, and flotation. It further sets requirements for seating and occupancy areas of crew members. Personal watercraft are excluded from the Scope of this document.

Small craft — Maximum load capacity

GSO ISO 10592:2023 小型船舶 远程液压转向系统

This document specifies the requirements for the design, installation and testing of engine-mounted and craft-mounted remote hydraulic steering systems used with single and multiple engine installations of outboard engines over 15 kW per engine, as well as with single and multiple engines of inboard, sterndrive, and water jet drives, all used on small craft. This document does not address emergency means of steering the craft.

Small craft — Remote hydraulic steering systems

ISO/FDIS 6185-3:2023 充气船 第 3 部分：船体长度小于 8 m、电机额定功率为 15 kW 及以上的船

Inflatable boats — Part 3: Boats with a hull length less than 8 m with a motor rating of 15 kW and greater

BS EN ISO 25197:2020+A11:2023 小工艺品 用于转向、换档和油门的电气/电子控制系统

Small craft. Electrical/electronic control systems for steering, shift and throttle

BS EN ISO 15083:2020+A11:2023 小工艺品 舱底泵系统

Small craft. Bilge-pumping systems

BS EN ISO 12216:2022+A11:2023 小工艺品 窗户、舷窗、舱口、死灯和门 强度和水密性要求

Small craft. Windows, portlights, hatches, deadlights and doors. Strength and watertightness requirements

ISO/FDIS 6017:2023 小型船舶——自动水密通风关闭系统

Small craft — Automatic watertight ventilation shutdown system

23/30452836 DC BS EN ISO 11812 AMD 1. 小型工艺品 防水或快速排水的凹槽和驾驶舱

BS EN ISO 11812 AMD 1. Small craft. Watertight or quick-draining recesses and cockpits

KS V 0106-2023 无人驾驶小型船舶防撞性能评估的试验要求

Test requirements for the evaluation of collision avoidance performance of unmanned small ship

GSO ISO 11592-2:2023 小型船舶 使用操纵速度确定最大推进功率额定值 第2部分：船体长度在 8 m 至 24 m 之间的船舶

This document specifies the requirements for determining the maximum propulsion power rating using manoeuvring speed for engine-driven craft with a length of the hull (LH, as defined in ISO 8666) between 8 m and 24 m. This document is applicable to craft with a calculated Froude number (Fn) ≥ 1,1. This document is not applicable to: —    inflatable craft, as defined by ISO 6185-4; —    craft designed and constructed solely for competitive racing (racing craft); —    craft primarily designed not to be engine driven. This document does not specify craft constructional strength requirements related to maximum propulsion power rating and does not guarantee stability under all conditions of seaway, wind, wakes and waves.

Small craft — Determination of maximum propulsion power rating using manoeuvring speed — Part 2: Craft with a length of hull between 8 m and 24 m

ISO/CD 23625:2023 小工艺品 锂离子电池

Small craft — Lithium-ion batteries

ISO/CD 12401:2023 小型船舶 甲板安全带和安全索 安全要求和试验方法

Small craft — Deck safety harness and safety line — Safety requirements and test methods

ISO/CD 8846:2023 小型船舶 电气设备 防止周围易燃气体着火

Small craft — Electrical devices — Protection against ignition of surrounding flammable gases

BS EN ISO 21487:2023 小工艺品 永久安装的汽油和柴油油箱

1   Scope This document specifies requirements for the design, installation and testing of petrol and diesel fuel tanks for internal combustion engines, that are intended to be permanently installed in small craft .

Small craft. Permanently installed petrol and diesel fuel tanks

BS EN ISO 10088:2023 小工艺品 永久安装的燃油系统

1   Scope This document specifies the requirements for the design, materials, construction, installation and testing of permanently installed fuel systems as installed for internal combustion engines. It applies to all parts of permanently installed diesel and petrol fuel systems as installed, from the fuel fill opening to the point of connection with the propulsion or auxiliary engine(s) on inboard- and outboard-powered small craft . Requirements for the design and testing of petrol and diesel fuel tanks for internal combustion engines that are intended to be permanently installed in small craft are given in ISO 21487:2022.

Small craft. Permanently installed fuel systems

BS EN ISO 13590:2023 小工艺品 个人船只 施工和系统安装要求

1   Scope This document specifies construction and system installation requirements for personal watercraft . It addresses the builder’s plate , watercraft identification, permanently installed petrol fuel systems , electrical systems, steering systems, ventilation, hull structure and floatation, stability, mooring and towing, flooding, off-throttle steering and the owner’s manual. This document does not apply to outboard powered personal watercraft and jet powered surfboards.

Small craft. Personal watercraft. Construction and system installation requirements