49.025.15 有色金属合金综合 标准查询与下载
共找到 497 条与 有色金属合金综合 相关的标准，共 34 页
This specification covers a corrosion and heat resistant nickel alloy in the form of forgings and forging stock. These forgings have been used typically for rotating parts, such as compressor blades, discs, hubs, shafts, and spacers requiring high strength up to 1500 degrees F (816 degrees C) and oxidation resistance up to 1750 degrees F (954 degrees C), but usage is not limited to such applications.
Nickel Alloy, Corrosion and Heat Resistant, Forgings 57Ni 19.5Cr 13.5Co 4.3Mo 3.0Ti 1.4Al 0.05Zr 0.006B, Consumable Electrode or Vacuum Induction Melted, 1825 to 1900°F (996 to 1038°C) Solution, Stabilization, and Precipitation Heat Treated
- ICS
- 49.025.15
- CCS
- H62
- 发布
- 2006-05-01
- 实施
This specification covers a corrosion and heat resistant nickel alloy in the form of seamless tubing. This tubing has been used typically for parts requiring corrosion and oxidation resistance, up to 2000 °F (1093 °C), particularly where such parts may require welding during fabrication, but usage is not limited to such applications.
Nickel Alloy, Corrosion and Heat Resistant, Seamless Tubing 74Ni - 15.5Cr - 8.0Fe Annealed UNS N06600
- ICS
- 49.025.15
- CCS
- V21
- 发布
- 2006-05-01
- 实施
This specification covers a corrosion and heat resistant nickel alloy in the form of sheet, strip, and plate. These products have been used typically for parts requiring resistance to creep and stress-rupture up to 1300 ?F (704 ?C), oxidation resistance up to 1800 ?F (982 ?C), and good machinability, particularly for those parts which are formed or welded and then heat treated to develop required properties, but usage is not limited to such applications.
Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate 41.5Ni 16Cr 37Fe 2.9Cb 1.8Ti Consumable Electrode or Vacuum Induction Melted 1750°F (954°C) Solution Heat Treated
- ICS
- 49.025.15
- CCS
- V11
- 发布
- 2006-03-01
- 实施
Nickel-Iron Magnetic Alloy, Bars and Forgings
- ICS
- 49.025.15
- CCS
- 发布
- 2006-02-01
- 实施
This specification covers a magnetic nickel-iron alloy in the form of bars, forgings, and forging stock. These products have been used typically in magnetic circuits requiring high magnetic permeability at low flux densities after high temperature annealing in hydrogen, but usage is not limited to such applications.
Nickel-Iron Magnetic Alloy, Bars and Forgings
- ICS
- 49.025.15
- CCS
- V11
- 发布
- 2006-02-01
- 实施
This specification covers two types of magnetic nickel-iron alloy in the form of sheet and strip. These products have been used typically for magnetic circuit parts that require high magnetic permeability at low flux densities with the fabricated parts to be annealed in dry hydrogen, but usage is not limited to such applications.
Nickel-Iron Alloy, Magnetic, Sheet and Strip Annealed
- ICS
- 49.025.15
- CCS
- V11
- 发布
- 2006-02-01
- 实施
This specification covers two types of magnetic nickel-iron alloy in the form of sheet and strip. These products have been used typically for magnetic circuit parts that require high magnetic permeability at low flux densities with the fabricated parts to be annealed in dry hydrogen, but usage is not limited to such applications.
Nickel-Iron Alloy, Magnetic, Sheet and Strip Cold Rolled, Half-Hard Temper
- ICS
- 49.025.15
- CCS
- V11
- 发布
- 2006-02-01
- 实施
This specification covers a corrosion and heat resistant cobalt alloy in the form of welding wire. This wire has been used typically as filler metal for gas-tungsten-arc or gas-metal-arc welding of parts fabricated from alloys of similar composition, but usage is not limited to such applications.
Cobalt Alloy, Corrosion and Heat-Resistant, Welding Wire 39Co - 22Cr - 22Ni - 14.5W - 0.07La UNS R30188
- ICS
- 49.025.15
- CCS
- J33
- 发布
- 2006-01-01
- 实施
This standard specifies the requirements relating to:Heat resisting alloy NI-PH2301 (NiCr21Fe18Mo9)Non heat treated Forging stock a or D ≤ 250 mm for aerospace applications.
Aerospace series - Heat resisting alloy NI-PH2301 (NiCr21Fe18Mo9) - Non heat treated - Forging stock - a or D <= 250 mm
- ICS
- 49.025.15
- CCS
- 发布
- 2006
- 实施
Aerospace series - Magnesium alloy MG-C18002 - T4 - Sand casting
- ICS
- 49.025.15
- CCS
- 发布
- 2005-12-30
- 实施
- 2005-12-30
This standard specifies the requirements relating to: Magnesium alloy MG-C46001 T6 Sand casting for aerospace applications.
Aerospace series - Magnesium alloy MG-C46001 - T6 - Sand casting
- ICS
- 49.025.15
- CCS
- V16
- 发布
- 2005-12-13
- 实施
- 2005-12-13
This standard specifies the requirements relating to: Magnesium alloy MG-C18002 T4 Chill casting for aerospace applications.
Magnesium alloy MG-C18002 - T4 - Chill casting
- ICS
- 49.025.15
- CCS
- V11
- 发布
- 2005-11-17
- 实施
- 2005-11-17
This standard specifies the requirements relating to: Magnesium alloy MG-C18002 T4 Sand casting for aerospace applications.
Aerospace series - Magnesium alloy MG-C18002 - T4 - Sand casting
- ICS
- 49.025.15
- CCS
- V11
- 发布
- 2005-11-17
- 实施
- 2005-11-17
Aerospace series - Magnesium alloy MG-C46001 - T6 - Sand casting
- ICS
- 49.025.15
- CCS
- 发布
- 2005-11-15
- 实施
- 2005-11-15
This standard specifies the requirements relating to: Magnesium alloy MG-C46001 T6 Chill casting for aerospace application.
Magnesium alloy MG-C46001-T6 - Chill casting
- ICS
- 49.025.15
- CCS
- V11
- 发布
- 2005-10-04
- 实施
- 2005-10-04
Aerospace series - Magnesium alloy MG-C46001-T6 - Chill casting; German and English version EN 2732:2005
- ICS
- 49.025.15
- CCS
- V11
- 发布
- 2005-10
- 实施
This specification covers the engineering requirements for heat treatment of magnesium alloy castings and for parts machined from castings
Heat Treatment of Magnesium Alloy Castings
- ICS
- 49.025.15
- CCS
- V11
- 发布
- 2005-08-30
- 实施
This standard specifies the requirements relating to:Magnesium alloy MG-C46001 T6 Sand casting for aerospace applications.
Aerospace series - Magnesium alloy MG-C46001 - T6 - Sand casting
- ICS
- 49.025.15
- CCS
- 发布
- 2005-08-01
- 实施
This standard specifies the requirements relating to:Magnesium alloy MG-C46001 T6 Chill casting for aerospace application.
Aerospace series - Magnesium alloy Mg-C46001 - T6 - Chill casting
- ICS
- 49.025.15
- CCS
- 发布
- 2005-06-01
- 实施
This specification specifies the engineering requirements for heat treatment, by part fabricators (users) or their vendors or subcontractors, of parts made of cast nickel or cobalt alloys and of fabricated assemblies in which cast nickel or cobalt alloys are the primary structural components. It is not intended to provide requirements for heat treating operations that are a responsibility of the casting supplier in meeting the requirements of the casting commodity specification.
Heat Treatment Cast Nickel Alloy and Cobalt Alloy Parts
- ICS
- 49.025.15
- CCS
- V16
- 发布
- 2005-03-03
- 实施
