49.025.30 钛 标准查询与下载
共找到 620 条与 钛 相关的标准，共 42 页
This standard defines the requirements for the ordering, manufacture, testing, inspection and delivery of titanium and titanium alloy plate, sheet and strip. It shall be applied when referred to and in conjunction with the EN material standard unless otherwise specified on the drawing, order or inspection schedule.
Aerospace series - Titanium and titanium alloys - Technical specification - Part 001: Plate, sheet and strip; German and English version EN 4800-001:2010
- ICS
- 49.025.30
- CCS
- V11
- 发布
- 2011-06
- 实施
This standard defines the requirements for the ordering, manufacture, testing, inspection and delivery of titanium and titanium alloy remelting stock. It shall be applied when referred to and in conjunction with the EN material standard unless otherwise specified on the drawing, order or inspection schedule.
Aerospace series - Titanium and titanium alloys - Technical specification - Part 007: Remelting stock; German and English version EN 4800-007:2010
- ICS
- 49.025.30
- CCS
- V11
- 发布
- 2011-06
- 实施
This European Standard defines the requirements for the ordering, manufacture, testing, inspection and delivery of titanium and titanium alloy tube. It shall be applied when referred to and in conjunction with the EN material standard unless otherwise specified on the drawing, order or inspection schedule.
Aerospace series - Titanium and titanium alloys - Technical specification - Part 003: Tube; German and English version EN 4800-003:2010
- ICS
- 49.025.30
- CCS
- V11
- 发布
- 2011-06
- 实施
This standard defines the requirements for the ordering, manufacture, testing, inspection and delivery of titanium and titanium alloy pre-production and production forgings. It shall be applied when referred to and in conjunction with the EN material standard unless otherwise specified on the drawing, order or inspection schedule.
Aerospace series - Titanium and titanium alloys - Technical specification - Part 006: Pre-production and production forgings; German and English version EN 4800-006:2010
- ICS
- 49.025.30
- CCS
- V11
- 发布
- 2011-06
- 实施
This standard defines the requirements for the ordering, manufacture, testing, inspection and delivery of titanium and titanium alloy forging stock. It shall be applied when referred to and in conjunction with the EN material standard unless otherwise specified on the drawing, order or inspection schedule.
Aerospace series - Titanium and titanium alloys - Technical specification - Part 005: Forging stock; German and English version EN 4800-005:2010
- ICS
- 49.025.30
- CCS
- V11
- 发布
- 2011-06
- 实施
This standard defines the requirements for the ordering, manufacture, testing, inspection and delivery of titanium and titanium alloy wire. It shall be applied when referred to and in conjunction with the EN material standard unless otherwise specified on the drawing, order or inspection schedule.
Aerospace series - Titanium and titanium alloys - Technical specification - Part 004: Wire; German and English version EN 4800-004:2010
- ICS
- 49.025.30
- CCS
- V11
- 发布
- 2011-06
- 实施
This specification covers a titanium alloy in the form of forgings under 4.0 inches (102 mm) in nominal cross-sectional thickness and of forging stock. These forgings have been used typically for parts in high stress and stress-corrosion-resistant applications requiring higher fracture toughness and allowing lower tensile properties than AMS 4984 and AMS 4986, but usage is not limited to such applications.
Titanium Alloy, Forgings 10V 2Fe 3Al, Consumable Electrode Melted, Single-Step Solution Heat Treated and Overaged, 140 ksi (965 MPa) Tensile Strength
- ICS
- 49.025.30
- CCS
- V11
- 发布
- 2011-05-26
- 实施
This specification covers a titanium alloy in the form of forgings under 1.00 inch (25 mm) in nominal cross-sectional thickness and of forging stock. These forgings have been used typically for parts in high stress and stress-corrosion-resistant applications, but usage is not limited to such applications.
Titanium Alloy, Forgings 10V-2Fe-3Al Consumable Electrode Melted, Single-Step Solution Heat Treated and Aged, 180 ksi (1241 MPa) Tensile Strength
- ICS
- 49.025.30
- CCS
- V11
- 发布
- 2011-05-26
- 实施
This specification covers a titanium alloy in the form of forgings 4.0 inches (102 mm) and under in nominal cross-sectional thickness and of forging stock. These forgings have been used typically for parts in high stress and stress-corrosion-resistant applications requiring higher fracture toughness, but permitting lower tensile properties, than AMS 4984, but usage is not limited to such applications.
Titanium Alloy, Forging 10V 2Fe 3Al Consumable Electrode Melted, Single-Step Solution Heat Treated and Overaged, 160 ksi (1103 MPa) Tensile Strength
- ICS
- 49.025.30
- CCS
- V11
- 发布
- 2011-05-26
- 实施
This specification covers a titanium alloy in the form of forgings and forging stock. These forgings have been used typically for parts that do not require heat treatment but require high mechanical properties in the annealed condition and for which processing above the beta transus is permissible, but usage is not limited to such applications. This alloy exhibits high strength-to-weight ratios up to 750 °F (399 °C). Certain processing procedures and service conditions may cause these products to become subject to stress-corrosion cracking; ARP 982 recommends practices to minimize such conditions.
Titanium Alloy, Forgings 6Al 4V Alpha-Beta or Beta Processed, Annealed
- ICS
- 49.025.30
- CCS
- V11
- 发布
- 2011-05-25
- 实施
This specification covers a titanium alloy in the form of seamless tubing. This tubing has been used typically for parts, such as hydraulic lines, requiring strength and oxidation resistance up to 600 °F (316 °C) and weldability, but usage is not limited to such applications.
Titanium Alloy Tubing, Seamless, Hydraulic 3.0Al 2.5V Cold Worked, Stress Relieved
- ICS
- 49.025.30
- CCS
- V11
- 发布
- 2011-05-25
- 实施
This specification covers a titanium alloy in the form of extruded bars, tubes, and shapes, flash welded rings, and stock for flash welded rings. These products have been used typically for parts that require high mechanical properties and are machined from product in the heat treated condition, but usage is not limited to such applications. This alloy exhibits high strength-to-weight ratios up to 750 °F (399 °C).
Titanium Alloy, Extrusions and Flash Welded Rings, 6Al 4V, Solution Heat Treated and Aged
- ICS
- 49.025.30
- CCS
- V11
- 发布
- 2011-05-25
- 实施
Aerospace series - Titanium and titanium alloys - Technical specification - Part 002: Bar and section
- ICS
- 49.025.30
- CCS
- 发布
- 2011-03-31
- 实施
- 2011-03-31
Aerospace series - Titanium and titanium alloys - Technical specification - Part 005: Forging stock
- ICS
- 49.025.30
- CCS
- 发布
- 2011-03-31
- 实施
- 2011-03-31
Aerospace series - Titanium and titanium alloys - Technical specification - Part 003: Tube
- ICS
- 49.025.30
- CCS
- 发布
- 2011-03-31
- 实施
- 2011-03-31
Aerospace series - Titanium and titanium alloys - Technical specification - Part 004: Wire
- ICS
- 49.025.30
- CCS
- 发布
- 2011-03-31
- 实施
- 2011-03-31
Aerospace series - Titanium and titanium alloys - Technical specification - Part 007: Remelting stock
- ICS
- 49.025.30
- CCS
- 发布
- 2011-03-31
- 实施
- 2011-03-31
Aerospace series - Titanium and titanium alloys - Technical specification - Part 006: Pre-production and production forgings
- ICS
- 49.025.30
- CCS
- 发布
- 2011-03-31
- 实施
- 2011-03-31
Aerospace series - Titanium and titanium alloys - Technical specification - Part 008: Pre-production and production castings
- ICS
- 49.025.30
- CCS
- 发布
- 2011-03-31
- 实施
- 2011-03-31
Aerospace series - Titanium and titanium alloys - Technical specification - Part 001: Plate, sheet and strip
- ICS
- 49.025.30
- CCS
- 发布
- 2011-03-31
- 实施
- 2011-03-31
