49.025.60 织物 标准查询与下载

SAE AMS3801/1B-2011 斜纹布制降落伞含元纤维和低模量重量为4.7(159)

This specification covers one weight and one weave of low-modulus meta-aramid cloth. Primarily for use in construction of parachutes.

Cloth, Parachute, Meta-Aramid, Low Modulus, 4.7 (159) Weight, Twill

SAE AMS3801/5B-2011 重量为18.0(610)的经过树脂处理的篮子编织低模量元纤维降落伞布料

This specification covers one weight and one weave of low-modulus resin treated meta-aramid cloth. Primarily for use in construction of parachutes.

Cloth, Parachute, Meta-Aramid, Low Modulus, 18.0 (610) Weight, Basket Weave, Resin Treated

SAE AMS3801/4B-2011 重量为7.0(237)的平纹编织低模量元纤维降落伞布料

This specification covers one weight and one weave of low-modulus meta-aramid cloth. Primarily for use in construction of parachutes.

Cloth, Parachute, Meta-Aramid, Low Modulus, 7.0 (237) Weight, Plain Weave

SAE AMS3801C-2011 低模量间位芳纶降落伞布料

This specification covers a low modulus meta-aramid in the form of cloth. These products have been used typically used in construction of parachutes, but usage is not limited to such applications.

Cloth, Parachute - Meta-Aramid, Low Modulus

SAE AMS3801/2B-2011 特殊编织的布制降落伞含元纤维和低模量重量为6.5(220)

This specification covers one weight and one weave of low-modulus meta-aramid cloth. Primarily for use in construction of parachutes.

Cloth, Parachute, Meta-Aramid, Low Modulus, 6.5 (220) Weight, Special Weave

ASTM D3800M-11 高模量纤维密度的标准试验方法

Fiber density is useful in the evaluation of new materials at the research and development level and is one of the material properties normally given in fiber specifications. Fiber density is used to determine fiber strength and modulus both of a fiber bundle and an individual filament. These properties are based on load or modulus slope over an effective area. Fiber density may be used with lineal mass of the fiber to give an approximation of effective tow area. Tow area divided by the average number of filaments in a tow gives an approximation of the effective area of an individual filament. Fiber density is used as a constituent property when determining reinforcement volume and void volume based on reinforcement mass and laminate density.1.1 This test method covers the determination of the density of high-modulus fibers and is applicable to both continuous and discontinuous fibers. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard may involve hazardous materials, operations, and equipment. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. See Section 9 for additional information.

Standard Test Method for Density of High-Modulus Fibers

BS 3F 128:2010 航空用棉带规范(额定经纱为R310 tex)

This British Standard specifies requirements for the yarn, manufacture, finish, construction and identification of cotton webbings for aerospace purposes.

Specification for cotton webbing suitable for aerospace purposes (warp yarn nominally R 310 tex)

MH/T 6060-2010 航空地毯

本标准规定了航空器舱内地面用地毯的分类、材料、试验方法、标识和包装。 本标准适用于航空器舱内地面用地毯,不适用于墙面或垂直侧壁的覆盖物。

Aircraft carpet

GSO ASTM C800:2010 玻璃纤维覆盖保温技术规范（飞机型）

This specification covers the composition , size , dimensions, and physical properties of glass fiber blanket thermal and acoustical insulation for use up to 700 °F (370 °C) in aircraft applications. For specific applications , the maximum temperature shall be agreed upon between the supplier and the purchaser .

Standard Specification for Glass Fiber Blanket Insulation (Aircraft Type)

SAE AMS3901/7D-2008 高模数2160 Denier(2400 d tex)0.6%涂饰的有机纤维(对芳族聚酰胺)纱线

This specification covers one type of organic fiber in the form of yarn. The product shall be formed as a multiplicity of filaments drawn together and gathered into an approximately parallel arrangement. Organic 2160 denier (2400 d tex) yarn with 390 ksi (2689 MPa) or 19.0 g/d minimum tensile strength and 16.5 Msi (114 GPa) or 750 g/d minimum tensile modulus for use in filament winding requiring high tensile strength and high modulus of elasticity in tension.

Yarn, Organic Fiber (Para-Aramid), High Modulus 2160 Denier, (2400 d tex), 0.6% Finish

SAE AMS3901/9C-2008 1.2%精制高模数为380旦(420d tex)的有机纤维(对位芳族)纱

This specification covers one type of organic fiber in the form of yarn. The product shall be formed as a multiplicity of filaments drawn together and gathered into an approximately parallel arrangement. Organic 380 denier (420 d tex) yarn with 390 ksi (2689 MPa) or 22.0 g/d minimum tensile strength and 17.5 Msi (121 GPa) or 850 g/d minimum tensile modulus for use in weaving requiring high tensile strength and high modulus of elasticity in tension.

Yarn, Organic Fiber (Para-Aramid), High Modulus 380 Denier, (420 d tex), 1.2% Finish

SAE AMS3901/2D-2008 0.6%精制高模数为380旦(420d tex)的有机纤维(对位芳族)纱

This specification covers one type of organic fiber in the form of yarn. The product shall be formed as a multiplicity of filaments drawn together and gathered into an approximately parallel arrangement. Organic 380 denier (420 d tex) yarn with 390 ksi (2689 MPa) or 22.0 g/d minimum tensile strength and 17.5 Msi (121 GPa) or 850 g/d minimum tensile modulus for use in general purpose composites requiring high tensile strength and high modulus of elasticity in tension.

Yarn, Organic Fiber (Para-Aramid), High Modulus 380 Denier, (420 d tex), 0.6% Finish

SAE AMS3901/3D-2008 0.6%精制高模数OY 390(2689)/2309、拉伸强度为16.5(114)/900、拉伸模数为1140旦的有机纤维(对位芳族)纱线

This specification covers one type of organic fiber in the form of yarn. The product shall be formed as a multiplicity of filaments drawn together and gathered into an approximately parallel arrangement. Organic 1140 denier (1270 d tex) yarn with 390 ksi (2689 MPa) or 22.0 g/d minimum tensile strength and 16.5 Msi (114 GPa) or 820 g/d minimum tensile modulus for use in general purpose composites requiring high tensile strength and high modulus of elasticity in tension.

Yarn, Organic Fiber (Para-Aramid), High Modulus OY 390 (2689)/2309 Tensile Strength 16.5 (114)/900 Tensile Modulus 1140 Denier, (1270 d tex), 0.6% Finish

SAE AMS3901/1D-2008 0.6%精制高模数为195旦(215 d tex)旦的有机纤维(对位芳族)纱

This specification covers one type of organic fiber in the form of yarn. The product shall be formed as a multiplicity of filaments drawn together and gathered into an approximately parallel arrangement. Organic 195 denier (215 d tex) yarn with 390 ksi (2689 MPa) or 19.0 g/d minimum tensile strength and 18 Msi (124 GPa) or 850 g/d minimum tensile modulus for use in general purpose composites requiring high tensile strength and high modulus of elasticity in tension.

Yarn, Organic Fiber (Para-Aramid), High Modulus 195 (215 d tex) Denier, 0.6% Finish

SAE AMS3901/6D-2008 0.6%精制高模数为4560旦(5070 d tex)的有机纤维(对位芳族)粗纱

This specification covers one type of organic fiber in the form of roving. The product shall be formed as four ends of 1140 denier yarn (AMS 3901/3) collected into an approximately parallel arrangement without twist. Organic 4560 denier (5070 d tex) roving with 500 ksi (3447 MPa) or 21.0 g/d minimum tensile strength and 17.5 Msi (121 GPa) or 815 g/d minimum tensile modulus for use in filament winding requiring high tensile strength and high modulus of elasticity in tension.

Roving, Organic Fiber (Para-Aramid), High Modulus 4560 Denier, (5070 d tex), 0.6% Finish

SAE AMS3901/5D-2008 0.6%精制高模数为7100旦(7900 d tex)的有机纤维(对位芳族)粗纱

This specification covers one type of organic fiber in the form of roving. The product shall be formed as five ends of 1420 denier yarn (AMS 3901/4) collected into an approximately parallel arrangement without twist. Organic 7100 denier (7900 d tex) roving with 450 ksi (3103 MPa) or 21.0 g/d minimum tensile strength and 17.5 Msi (121 GPa) or 900 g/d minimum tensile modulus for use in filament winding requiring high tensile strength and high modulus of elasticity in tension.

Roving, Organic Fiber (Para-Aramid), High Modulus 7100 Denier, (7900 d tex), 0.6% Finish

SAE AMS3901/8C-2008 1.2%精制高模数(215 d tex)的有机纤维(对位芳族)纱

This specification covers one type of organic fiber in the form of yarn. The product shall be formed as a multiplicity of filaments drawn together and gathered into an approximately parallel arrangement. Organic 195 denier (215 d tex) yarn with 390 ksi (2689 MPa) or 21.0 g/d minimum tensile strength and 18 Msi (124 GPa) or 895 g/d minimum tensile modulus for use in weaving requiring high tensile strength and high modulus of elasticity in tension.

Yarn, Organic Fiber (Para-Aramid), High Modulus (215 d tex), 1.2% Finish

SAE AMS3901/16B-2008 0.6%精制高模数为8520旦(9500d tex)的有机纤维(对位芳族)粗纱

This specification covers one type of organic fiber in the form of roving. The product shall be formed as three ends of 2840 denier yarn (AMS 3901/14) collected into an approximately parallel arrangement without twist.

Roving, Organic Fiber (Para-Aramid), High Modulus 8520 Denier, (9500 d tex), 0.6% Finish

SAE AMS3901/13B-2008 0.6%精制高模数为2450旦(2720 d tex)的有机纤维(对位芳族)纱

This specification covers one type of organic fiber in the form of yarn. The product shall be formed as a multiplicity of filaments drawn together and gathered into an approximately parallel arrangement.

Yarn, Organic Fiber (Para-Aramid), High Modulus 2450 (2720 d tex) Denier, 0.6% Finish

SAE AMS3901/15B-2008 0.6%精制高模数为7350旦(8200 d tex)的有机纤维(芳族)粗纱

This specification covers one type of organic fiber in the form of roving. The product shall be formed as three ends of 2450 denier yarn (AMS 3901/13) collected into an approximately parallel arrangement without twist.

Roving, Organic Fiber (Paramid), High Modulus 7350 Denier, (8200 d tex), 0.6% Finish