49.030.01 紧固件综合 标准查询与下载

LST EN 2786-2008 航天系列 紧固件电解镀银

Aerospace series - Electrolytic silver plating of fasteners

SAE AS5869B-2008 5080 PSI液压轴向陷型3孔法兰连接组装配件

Fitting Assembly, Union, 3 Hole Flange, Axially Swaged, Hydraulic, 5080 PSI

Fitting Assembly, Union, 3 Hole Flange, Axially Swaged, Hydraulic, 5080 PSI

BS EN 3043:2008 航空航天系列.FE PA92HT(A286)型耐热钢制外螺纹紧固件.等级:900MPa/650℃.可选加工方法.技术规范

Aerospace series - Fasteners, externally threaded, in heat resisting steel FE PA92HT (A286) - Classification: 900 MPa/650 °C, manufacturing method optional - Technical specification

BS EN 3782:2008 航空航天系列.100°埋头螺钉用孔.设计标准

Aerospace series - Holes for 100 ° countersunk head screws - Design standard

DS/EN 3043:2008 航空航天系列 耐热钢 FE PA92HT（A286）外螺纹紧固件 分类：900 MPa/650°C，制造方法可选 技术规范

This standard specifies the technical and quality assurance requirements for externally threaded fasteners in material FE-PA92HT (A286) of tensile strength class 900 MPa at room temperature, maximum test temperature of material 650 °C.The externally threaded fasteners specified here may be manufactured by machining from bar or by forging at the manufacturer's option, if forged there is no requirement for control of grain flow.Primarily for aerospace applications it is applicable to such externally threaded fasteners when referenced on the product standard or drawing.

Aerospace series - Fasteners, externally threaded, in heat resisting steel FE PA92HT (A286) - Classification: 900 MPa/650 °C, manufacturing method optional - Technical specification

BS EN 3201:2008 航空航天系列.米制螺纹紧固件的孔.设计标准

This standard provides particulars of hole sizes, chamfer dimensions and positional tolerances to suit metric threaded fasteners with nominal diameters of 3 mm to 20 mm.

Aerospace series - Holes for metric threaded fasteners - Design standard

DS/EN 3201:2008 航空航天系列 公制螺纹紧固件用孔 设计标准

This standard provides particulars of hole sizes, chamfer dimensions and positional tolerances to suit metric threaded fasteners with nominal diameters of 3 mm to 20 mm.

Aerospace series - Holes for metric threaded fasteners - Design standard

DS/EN 3368:2008 航天系列 航天设计标准 定位销孔

This standard provides particulars of hole sizes and associated fitting conditions to suit locating pins EN 3150 and EN 3151 series.

Aerospace series - Aerospace design standard - Holes for locating pins

EN 3782:2008 航空航天系列.100°埋头螺丝安装孔.设计标准

This standard specifies holes in common parts and sheet metal for 100° countersunk head screws with nominal diameters of 3 mm to 5 mm and head configuration according to EN standards for aerospace applications.

Aerospace series - Holes for 100?countersunk head screws - Design standard

EN 3043:2008 航空航天系列.FE PA92HT (A286)耐热钢外螺纹紧固件.分类:900 MPa/650℃.可选制造法.技术规范

This standard specifies the technical and quality assurance requirements for externally threaded fasteners in material FE-PA92HT (A286) of tensile strength class 900 MPa at room temperature, maximum test temperature of material 650 °C. The externally threaded fasteners specified here may be manufactured by machining from bar or by forging at the manufacturer's option, if forged there is no requirement for control of grain flow. Primarily for aerospace applications it is applicable to such externally threaded fasteners when referenced on the product standard or drawing.

Aerospace series - Fasteners, externally threaded, in heat resisting steel FE PA92HT (A286) - Classification: 900 MPa/650 Degrees Centigrade, manufacturing method optional - Technical specification

BS EN 3368:2008 航空航天系列.航空航天设计标准.定位销用孔

This standard provides particulars of hole sizes and associated fitting conditions to suit locating pins EN 3150 and EN 3151 series.

Aerospace series — Aerospace design standard — Holes for locating pins

BS EN 2786:2008 航空航天系列.紧固件的电解镀银

This standard specifies the electrolytic silver plating of fasteners used in aerospace applications. It shall apply whenever referenced.

Aerospace series - Electrolytic silver plating of fasteners

DS/EN 2786:2008 航天系列 紧固件电解镀银

This standard specifies the electrolytic silver plating of fasteners used in aerospace applications.It shall apply whenever referenced.

Aerospace series - Electrolytic silver plating of fasteners

EN 3201:2008 航空航天系列.米制螺纹紧固件的孔.设计标准

This standard provides particulars of hole sizes, chamfer dimensions and positional tolerances to suit metric threaded fasteners with nominal diameters of 3 mm to 20 mm.

Aerospace series - Holes for metric threaded fasteners - Design standard

EN 3368:2008 航空航天系列.航空航天设计标准.定位销的孔

This standard provides particulars of hole sizes and associated fitting conditions to suit locating pins EN 3150 and EN 3151 series.

Aerospace series - Aerospace design standard - Holes for locating pins

EN 2786:2008 航空航天系列.紧固件的电解镀银

This standard specifies the electrolytic silver plating of fasteners used in aerospace applications. It shall apply whenever referenced.

Aerospace series - Electrolytic silver plating of fasteners

SAE AS3503-2007 特大型UNS S66286固态膜润滑的自拉削键自锁紧塑料锁紧装置用螺纹刀片

INSERT, SCREW THREAD, SELF LOCKING PLASTIC LOCKING DEVICE, SOLID FILM LUBRICATED, SELF-BROACHING KEYS, OVERSIZE UNS S66286

INSERT, SCREW THREAD, SELF LOCKING PLASTIC LOCKING DEVICE, SOLID FILM LUBRICATED, SELF-BROACHING KEYS, OVERSIZE UNS S66286

SAE AS3502-2007 UNS S66286固态膜润滑的自拉削键自锁紧塑料锁紧装置用螺纹刀片

INSERT, SCREW THREAD, SELF LOCKING PLASTIC LOCKING DEVICE, SOLID FILM LUBRICATED SELF-BROACHING KEYS, UNS S66286

INSERT, SCREW THREAD, SELF LOCKING PLASTIC LOCKING DEVICE, SOLID FILM LUBRICATED SELF-BROACHING KEYS, UNS S66286

SAE AS4723-2007 固态膜润滑的塑料自锁紧装置的锁紧、UNS S66286、自锁紧、螺纹刀片采购规范

1.1 TypeThis procurement specification covers inserts made from A286 alloy of the type identified under the Unified NumberingSystem as UNS S66286, solid film lubricated with a plastic self locking device, integrated locking keys to positively securethe insert against rotation when properly installed in threaded holes.1.2 ApplicationInserts covered by this specification are intended as general purpose fasteners up to 500 °F.1.2.1 Inserts conforming to the design and dimensions of AS3502 and AS3503 shall be capable of developing aminimum tensile strength as follows: AS3502 = 160,000 psi : AS3503 = 200,000 psi.1.3 Safety - Hazardous MaterialsWhile the materials, methods, applications, and processes described or referenced in this specification may involve theuse of hazardous materials, this specification does not address the hazards which may be involved in such use. It is thesole responsibility of the user to ensure familiarity with the safe and proper use of any hazardous materials and to takenecessary precautionary measures to ensure the health and safety of all personnel involved.

Insert, Screw Thread, Self-Locking, UNS S66286, Key Locked, Plastic Self Locking Device, Solid Film Lubricant Procurement Specification For

SAE AS5827A-2007 超精细螺纹、非扩口配件端部的设计标准

FITTING END, FLARELESS, EXTRA FINE THREAD, DESIGN STANDARD.Figure is about FITTING END DESIGN, STYLE B AND G and FITTING END DESIGN, STYLE ESAME AS STYLE G EXCEPT AS SHOWN. Table is about DIMENSIONS A-F, DIMENSIONS G-Y and WRENCH PAD DIMENSIONS E-Z.

FITTING END, FLARELESS, EXTRA FINE THREAD, DESIGN STANDARD