49.030.10 螺纹 标准查询与下载

KS W ISO 5855-1-2008(2018) 航空航天MJ螺纹第1部分:一般要求

Aerospace－MJ threads－Part 1：General requirements

BS EN 4493:2008 航空航天系列.镀银NI-PH1801(NIP96HT、镍铬钛合金90)型耐热镍基合金中自锁紧螺旋缠绕螺纹嵌镶件

This standard specifies the characteristics of self-locking, helical coil, screw thread inserts in NI-PH1801 (NI-P96HT), silver plated, for aerospace applications. Maximum test temperature: 550 °C.

Aerospace series - Inserts, screw thread, helical coil, self-locking, in heat resisting nickel base alloy NI-PH1801 (NIP96HT, Nimonic 90), silver plated

DS/EN 4493:2008 航空航天系列 嵌件，螺纹，螺旋线圈，自锁，耐热镍基合金 NI-PH1801（NI-P96HT，Nimonic 90），镀银

This standard specifies the characteristics of self-locking, helical coil, screw thread inserts in NI-PH1801 (NI P96HT), silver plated, for aerospace applications.Maximum test temperature: 550 °C.

Aerospace series - Inserts, screw thread, helical coil, self-locking, in heat resisting nickel base alloy NI-PH1801 (NI-P96HT, Nimonic 90), silver plated

EN 4493:2008 航空航天系列.镀银NI-PH1801(NI-P96HT,Nimonic 90)耐热镍基合金自锁紧螺旋缠绕螺纹插入件

This standard specifies the characteristics of self-locking, helical coil, screw thread inserts in NI-PH1801 (NI-P96HT), silver plated, for aerospace applications. Maximum test temperature: 550 ℃.

Aerospace series - Inserts, screw thread, helical coil, self- locking, in heat resisting nickel base alloy NI-PH1801 (NI- P96HT, Nimonic 90), silver plated

CEN EN 4493-2008 航空航天系列 嵌件，螺纹，螺旋线圈，自锁，耐热镍基合金 NI-PH1801（NIP96HT，Nimonic 90），镀银

This standard specifies the characteristics of self-locking, helical coil, screw thread inserts in NI-PH1801 (NI-P96HT), silver plated, for aerospace applications. Maximum test temperature: 550 °C.

Aerospace series - Inserts, screw thread, helical coil, selflocking, in heat resisting nickel base alloy NI-PH1801 (NIP96HT, Nimonic 90), silver plated

SAE AS1229C-2007 插入，螺纹，螺旋线圈，螺柱锁定，性能标准

This SAE Aerospace Standard (AS) covers helical coil stud locking screw thread inserts made from formed wire in which the inner surface of the coil, after assembly provides threads of standard Unified 60° form as specified on the assembly drawing. This standard also covers the performance requirements of the locking feature of the insert which will retain Unified ANSI B1.1 (UN Profile) or AS8879 (UNJ Profile) external threaded parts. To establish the performance requirements of helical coil stud locking screw thread inserts.

Insert, Screw Thread, Helical Coil, Stud Locking, Performance Standard for

SAE AS1229C-2006 螺柱锁紧螺旋线圈用螺纹刀片性能标准

This SAE Aerospace Standard (AS) covers helical coil stud locking screw thread inserts made from formed wire in which the inner surface of the coil, after assembly provides threads of standard Unified 60?form as specified on the assembly drawing. This standard also covers the performance requirements of the locking feature of the insert which will retain Unified ANSI B1.1 (UN Profile) or AS8879 (UNJ Profile) external threaded parts. To establish the performance requirements of helical coil stud locking screw thread inserts.

Insert, Screw Thread, Helical Coil, Stud Locking, Performance Standard for

DLA A-A-1923 A VALID NOTICE 2-2006 (外部螺纹楔螺栓锚)扩展护罩

A-A-1923A, dated 21 August 2001, has been reviewed and determined to be valid for use in acquisition.

SHIELD EXPANSION (LAG, MACHINE AND EXTERNALLY THREADED WEDGE BOLT ANCHORS)

KS W ISO 10959:2005 航空航天.MJ螺纹.量规

이 규격은 KS W ISO 5855-1, KS W ISO 5855-2, KS W ISO 5

Aerospace-MJ threads-Gauging

KS W ISO 5855-2:2005 航空航天.MJ螺纹.第2部分:螺母和螺栓的极限尺寸

이 규격은 항공 우주 구조물 제작에 사용하는 호칭 지름 1.6~39 mm의 볼트와 너트의

Aerospace－MJ threads－Part 2：Limit dimensions for bolts and nuts

KS W ISO 5855-3:2005 航空航天.MJ螺纹.第3部分:液体系统管接头螺纹系统的极限尺寸

이 규격은 항공 우주 구조물 제작에서 유체 시스템용 피팅의 MJ 나사에 대한 한계 치수를

Aerospace－MJ threads－Part 3：Limit dimensions for fittings for fluid systems

KS W ISO 10959-2005(2015) 航空航天MJ螺纹测量

Aerospace－MJ threads－Gauging

KS W ISO 5855-3-2005(2020) 航空 - MJ螺纹 - 第3部分:液压系统配件的极限尺寸

Aerospace－MJ threads－Part 3：Limit dimensions for fittings for fluid systems

KS W ISO 5855-2-2005(2020) 航空 - MJ螺丝 - 第2部分:螺母和螺栓的极限尺寸

Aerospace－MJ threads－Part 2：Limit dimensions for bolts and nuts

DLA MS51845 REV C VALID NOTICE 3-2005 90 度直螺纹 黄铜或青铜弯管 等级125

MS51845C, dated 14 January 2000, has been reviewed and determined to be valid for use in acquisition

ELBOWS, PIPE, BRASS OR BRONZE, THREADED, 90-DEG., STRAIGHT, CLASS 125

DLA MS39232 REV B VALID NOTICE 4-2005 (150和300磅)右手螺纹变径管

The activities above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http://assist.daps.dla.mil

REDUCER, PIPE RIGHT HAND THREAD (150 AND 300 POUNDS)

DLA A-A-59247 A-2004 (带附件的)电导管和螺钉螺纹便携式动力驱动

This commercial item description (CID) covers hand-held and stand-mounted power drives powered by integral or separately mounted electric motors for cutting threads on pipe and bolt stock.

DRIVE, POWER, PORTABLE; FOR PIPE AND BOLT THREADING, ELECTRIC (WITH ACCESSORIES)

SANS 1700-2-21:2004 紧固件.第2部分:螺纹.第21节:航空-MJ螺纹.一般要求

Specifies the general requirements for MJ threads used in aerospace construction. Determines the basic triangular profile for MJ threads and gives a system for designating the diameter and pitch combinations.

Fasteners Part 2: Screw threads Section 21: Aerospace - MJ threads - General requirements

SANS 1700-2-22:2004 紧固件.第2部分:螺纹.第22节:航空.MJ螺纹-螺栓及螺帽极限尺寸

Specifies limit dimensions for MJ threads for bolts and nuts of nominal diameter 1,6 mm to 39 mm for use in aerospace construction.

Fasteners Part 2: Screw threads Section 22: Aerospace - MJ threads - Limit dimensions for bolts and nuts

KS W ISO 3353-1:2003 航空航天.引导和收尾螺纹.第1部分:滚压外螺纹

이 규격은 항공 우주 구조물에 사용되는 전조 수나사산의 초입부 및 불완전 요구 조건과

Aerospace－Lead and runout threads－Part 1：Rolled external threads