49.030.10 螺纹 标准查询与下载

BS ISO 10959:2000 航空航天.MJ螺纹.量规测量

This International Standard contains information for the gauging of ISO MJ threads in accordance with ISO 5855-1, ISO 5855-2 and ISO 5855-3. Other methods of ensuring that the product is within the specified limits may be used provided correlation with the specified gauges is established [see 8.2 e)].

Aerospace - MJ threads - Gauging

ISO 10959:2000 航空航天 MJ螺纹 量规

This International Standard contains information for the gauging of ISO MJ threads in accordance with ISO 5855-1, ISO 5855-2 and ISO 5855-3. Other methods of ensuring that the product is within the specified limits may be used provided correlation with the specified gauges is established [see 8.2 e)].

Aerospace - MJ threads - Gauging

BS A 358-3:2000 MJ 线程 流体系统配件的限制尺寸

This part of ISO 5855 specifies limit dimensions of MJ threads for fluid systems fittings for aerospace construction.

MJ threads. Limit dimensions for fittings for fluid systems

BS A 358-1:2000 MJ 线程 一般要求

This part of ISO 5855 specifies the general requirements for MJ threads used in aerospace construction. It determines the basic triangular profile for this type of thread and gives a system for designating the diameter and pitch combinations. For all diameters 1,6 mm to 300 mm, it offers in the form of tables the basic dimensions and tolerances for a selection of diameter and pitch combinations. It also provides the method of calculation for the dimensions and tolerances for any diameter and pitch combination not given in the tables, including threads with a diameter in excess of 300 mm. For limit dimensions for bolts and nuts of nominal diameter 1,6 mm to 39 mm, see ISO 5855-2. For limit dimensions for fittings for fluid systems, see ISO 5855-3.

MJ threads. General requirements

BS A 358-2:2000 MJ 线程 螺栓和螺母的极限尺寸

This part of ISO 5855 specifies limit dimensions of MJ threads for bolts and nuts of nominal diameter 1,6 mm to 39 mm for aerospace construction.

MJ threads. Limit dimensions for bolts and nuts

BS A 346:2000 UNJ 螺纹 一般要求和限制尺寸

This International Standard specifies the general requirements and limit dimensions of inch series UNJ threads with controlled root radius for aerospace construction. It determines the basic triangular profile for this type of thread and gives a system for designating the diameter and number of threads per inch combinations. For all diameters 0,060 in (1,524 mm) to 6,000 in (152,4 mm), it offers in the form of tables the basic dimensions and tolerances for a selection of diameter and number of threads per inch combinations. It also provides the method of calculation for the dimensions and tolerances for any diameter and number of threads per inch combination not given in the tables, including threads with a diameter in excess of 6,000 in.

UNJ threads. General requirements and limit dimensions

DLA MS51845 REV C REINST NOTICE 2-2000 90 度直螺纹 黄铜或青铜弯管 等级125

MILITARY SPECIFICATION ELBOWS, PIPE, BRASS OR BRONZE, THREADED, gO-DEG., STRAIGHT, CLASS 125

ELBOWS, PIPE, BRASS OR BRONZE, THREADED, 90-DEG., STRAIGHT, CLASS 125

DLA MS39232 REV B REINST NOTICE 3-2000 (150和300磅)右手螺纹变径管

The General Services Administration has authorized the use of this commercial item description as a replacement for Military Specifications MIL-V-16720E and MIL-V-16721D which are cancelled.

REDUCER, PIPE RIGHT HAND THREAD (150 AND 300 POUNDS)

ISO 3161:1999 航空航天 UNJ螺纹 一般要求和极限尺寸

This International Standard specifies the general requirements and limit dimensions of inch series UNJ threads with controlled root radius for aerospace construction. It determines the basic triangular profile for this type of thread and gives a system for designating the diameter and number of threads per inch combinations. For all diameters 0,060 in (1,524 mm) to 6,000 in (152,4 mm), it offers in the form of tables the basic dimensions and tolerances for a selection of diameter and number of threads per inch combinations. It also provides the method of calculation for the dimensions and tolerances for any diameter and number of threads per inch combination not given in the tables, including threads with a diameter in excess of 6,000 in.

Aerospace - UNJ threads - General requirements and limit dimensions

ISO 5855-2:1999 航空航天 MJ螺纹 第2部分:螺栓和螺母螺纹的极限尺寸

This part of ISO 5855 specifies limit dimensions of MJ threads for bolts and nuts of nominal diameter 1,6 mm to 39 mm for aerospace construction.

Aerospace - MJ threads - Part 2: Limit dimensions for bolts and nuts

ISO 5855-1:1999 航空航天 MJ螺纹 第1部分:一般要求

This part of ISO 5855 specifies the general requirements for MJ threads used in aerospace construction. It determines the basic triangular profile for this type of thread and gives a system for designating the diameter and pitch combinations. For all diameters 1,6 mm to 300 mm, it offers in the form of tables the basic dimensions and tolerances for a selection of diameter and pitch combinations. It also provides the method of calculation for the dimensions and tolerances for any diameter and pitch combination not given in the tables, including threads with a diameter in excess of 300 mm. For limit dimensions for bolts and nuts of nominal diameter 1,6 mm to 39 mm, see ISO 5855-2. For limit dimensions for fittings for fluid systems, see ISO 5855-3.

Aerospace - MJ threads - Part 1: General requirements

ISO 5855-3:1999 航空航天 MJ螺纹 第3部分:液体系统管接头螺纹系统的极限尺寸

This part of ISO 5855 specifies limit dimensions of MJ threads for fluid systems fittings for aerospace construction.

Aerospace - MJ threads - Part 3: Limit dimensions for fittings for fluid systems

DLA MS51513 REV A NOTICE 1-1999 37度扩口式三岔管 外螺纹管转移

This notice shouldb e filed in front of MS51513A, dated 17 January 1979.

TEE, PIPE TO TUBE, FEMALE PIPE ON BRANCH, 37 DEGREE FLARED [Refer To: SAE J514, SAE J514, SAE J514, SAE J514, SAE J514]

DLA MS51812 REV F NOTICE 1-1999 非扩口舱壁液压管螺纹接套

This notice should be filed in front of MS51812F, dated 30 July 1987, and Amendment 1, dated 9 April 1998.

NIPPLE, TUBE, BULKHEAD, FLARELESS TYPE, HYDRAULIC [Refer To: SAE J514, SAE J514, SAE J514, SAE J514, SAE J514]

DLA MS51814 REV E NOTICE 1-1999 非扩口液压六边形管螺纹接套

This notice should be filed in front of MS51814E, dated 30 July 1987.

NIPPLE, TUBE, REGULAR HEX, FLARELESS TYPE, HYDRAULIC [Refer To: SAE J514, SAE J514, SAE J514, SAE J514, SAE J514]

DLA MS51815 REV F NOTICE 1-1999 非扩口液压外螺纹管端90度弯管

This notice should be filed in front of MS51815F, dated 30 July 1987.

ELBOW, PIPE TO TUBE, 90 DEGREE, MALE PIPE END, FLARELESS TYPE, HYDRAULIC [Refer To: SAE J514, SAE J514, SAE J514, SAE J514, SAE J514]

DLA MS51817 REV E NOTICE 1-1999 非扩口液压外螺纹管端45度弯管

This notice should be filed in front of MS51817E, dated 30 July 1987.

ELBOW, PIPE TO TUBE, 45 DEGREE, MALE PIPE END, FLARELESS TYPE, HYDRAULIC [Refer To: SAE J514, SAE J514, SAE J514, SAE J514, SAE J514]

DLA MS51818 REV E NOTICE 1-1999 液压非扩口式外螺纹管转移三岔管

The General Services Administration has authorized the use of this commercial item description as a replacement for Military Specifications MIL-V-16720E and MIL-V-16721D which are cancelled.

TEE, PIPE TO TUBE, MALE PIPE ON BRANCH, FLARELESS TYPE, HYDRAULIC [Refer To: SAE J514, SAE J514, SAE J514, SAE J514, SAE J514]

DLA MS51819 REV E NOTICE 1-1999 液压非扩口式外螺纹管端直管适配器

This notice should be filed in front of MS51819E, dated 30 July 1987.

ADAPTER, STRAIGHT, PIPE TO TUBE, MALE PIPE END, FLARELESS TYPE, HYDRAULIC [Refer To: SAE J514, SAE J514, SAE J514, SAE J514, SAE J514]

DLA MS51824 REV E NOTICE 1-1999 液压非扩口式外螺纹管端三岔管

This notice should be filed in front of MS51824E, dated 30 July 1987.

TEE, PIPE TO TUBE, MALE PIPE ON RUN, FLARELESS TYPE, HYDRAULIC [Refer To: SAE J514, SAE J514, SAE J514, SAE J514, SAE J514]