49.030.10 螺纹 标准查询与下载

DLA MS51856 REV C NOTICE 1-1999 液压非扩口式O形圈大六边形管螺纹接套

This notice should be filed in front of MS51856C, dated 30 July 1987.

NIPPLE, TUBE, LARGE HEX, O-RING, FLARELESS, HYDRAULIC [Refer To: SAE J514, SAE J514, SAE J514, SAE J514, SAE J514]

DLA MS51504 REV A NOTICE 1-1999 37度扩口法兰 90度弯头外螺纹管端弯管

This notice should be filed in front of MS51504A, dated 17 January 1979.

ELBOW, PIPE TO TUBE, 90 DEGREE MALE PIPE END, 37 DEGREE FLARED [Refer To: SAE J514, SAE J514, SAE J514, SAE J514, SAE J514]

DLA MS51508 REV A NOTICE 1-1999 37度扩口式弯管 45度外螺纹管端

This notice should be filed in front of MS51508A, dated 17 January 1979.

ELBOW, PIPE TO TUBE, 45 DEGREE MALE PIPE END, 37 DEGREE FLARED [Refer To: SAE J514, SAE J514, SAE J514, SAE J514, SAE J514]

DLA MS51511 REV A NOTICE 1-1999 37度扩口式三岔管 在管道上的管端外螺纹

This notice should be filed in front of MS5151 lA, dated 17 January 1979.

TEE, PIPE TO TUBE, MALE PIPE ON RUN, 37 DEGREE FLARED [Refer To: SAE J514, SAE J514, SAE J514, SAE J514, SAE J514]

DLA MS51512 REV A NOTICE 1-1999 37度扩口式三岔管 外螺纹管转移

This notice should be filed in front of MS51512A, dated 17 January 1979

TEE, PIPE TO TUBE, MALE PIPE ON BRANCH, 37 DEGREE FLARED

DLA MS51518 REV A NOTICE 1-1999 37度扩口式机用螺纹插塞

This notice shouldb e filed in front of MS51518A, dated 17 January 1979

PLUG, MACHINE THREAD, 37 DEGREE FLARED [Refer To: SAE J514, SAE J514, SAE J514, SAE J514, SAE J514]

DLA MS51519 REV A NOTICE 1-1999 37度扩口式 供O型圈使用 大六边形管螺纹接套

This notice should be fileidn front of MS51519A, dated 17 January 1979.

NIPPLE, TUBE, LARGE HEX, FOR USE WITH O-RING, 37 DEGREE FLARED [Refer To: SAE J514, SAE J514, SAE J514, SAE J514, SAE J514]

DLA MS51520 REV A NOTICE 1-1999 37度扩口式管螺纹接套舱壁

This notice should be filed in front of MS51520A, dated 17 January 1979, and Amendment 2, dated 9 April 1998.

NIPPLE, TUBE, BULKHEAD, 37 DEGREE FLARED [Refer To: SAE J514, SAE J514, SAE J514, SAE J514, SAE J514]

DLA MS51520 REV A (2)-1998 37度扩口式管螺纹接套舱壁

The General Services Administration has authorized the use of this commercial item description as a replacement for Military Specifications MIL-V-16720E and MIL-V-16721D which are cancelled.

NIPPLE, TUBE, BULKHEAD, 37 DEGREE FLARED [Refer To: SAE J514, SAE J514, SAE J514, SAE J514, SAE J514]

DLA MS51812 REV F (1)-1998 非扩口舱壁液压管螺纹接套

This amendment forms a part of MS51812F, dated 30 July 1987, and is approved for use by all Departments and Agencies of the Department of Defense.

NIPPLE, TUBE, BULKHEAD, FLARELESS TYPE, HYDRAULIC [Refer To: SAE J514, SAE J514, SAE J514, SAE J514, SAE J514]

SAE MA1518B-1998 外扳紧用带公制螺纹的螺栓,螺杆和螺母的设计参数

To fully define the following requirements for bolts with spline and hexagon heads of strength class up to but not including 1250 MPa: a. head dimensions; b. shank dimensions; c. geometric control; and d. surface texture. This document is based on one class of thread after all processing, including coating or plating, has been completed as follows: tolerance class 4h6h. For particulars of thread, see AS1370. For thread runout and lead threads, see AS3062. To fully define the following requirements for nuts with spline, plain hexagon and castellated configurations of strength class up to and including 1100 MPa: a. nut dimensions; b. geometric control; and c. surface texture. For particulars of threads, see AS1370. This document is based on the following classes of internal threads after all processing, including coating or plating, has been completed: tolerance class 4H6H for sizes up to and including 5 mm and tolerance class 4H6H for size 6 mm and larger. For particulars of thread, see AS1370

Bolts, Screws and Nuts - External Wrenching, Metric Threads - Design Parameters for

SAE AS1229B-1997 插入，螺纹，螺旋线圈，螺柱锁定，性能标准

This SAE Aerospace Standard (AS) covers helical coil stud locking screw thread inserts made from formed wire in which the inner surface of the coil, after assembly provides threads of standard Unified 60 degrees form as specified on the assembly drawing. This standard also covers the performance requirements of the locking feature of the insert which will retain Unified ANSI B1.1 (UN Profile) or AS8879 (UNJ Profile) external threaded parts. To establish the performance requirements of helical coil stud locking screw thread inserts.

Insert, Screw Thread, Helical Coil, Stud Locking, Performance Standard for

SAE MA1567B-1996 嵌件,螺纹,螺旋线圈公制系列的标准装配尺寸

This SAE Metric Aerospace Standard (MA) provides for helical coil screw thread inserts, both free running and self-locking, installation screw thread dimensional data and guidance on insert length selection. The document also provides formulas for determining requirements when non standard insert lengths are necessary.

Insert, Screw Thread, Helical Coil Metric Series, Standard Assembly Dimensions For

SAE MA1508-1996 直螺纹凹槽.公制

This SAE Aerospace Standard (MA) provides recommended dimensional data for screw thread undercuts for straight MJ metric screw threads in accordance with MA1370. The thread undercut data included in this document are primarily designed to provide a clearance for threading tool runout either where the thread is in a blind hole or where the thread is close to an adjacent shoulder. These thread undercuts are not recommended for bolts, screws, or studs which are required to be necked; e.g., reduced shank contiguous to the thread, to improve their tensile, impact, and cyclic load performance.

Undercuts for Straight Screw Threads - Metric

SAE MA1421-1996 固定螺钉螺纹的轴杆或轴承用米制60°螺钉螺纹的航空器选择的直径螺距列表

This SAE Aerospace Standard (MA) establishes the diameter-pitch combinations of ISO metric 60 degrees screw threads recommended for use in the aerospace industry for metric module shaft or bearing retaining screw threads.

Aerospace Selected Diameter-Pitch Combinations of Metric 60 Degrees Screw Threads for Shaft or Bearing Retaining Screw Threads

DLA A-A-1923 A-1995 (外部螺纹楔螺栓锚)扩展护罩

Unless otherwise specified, all dimensions are in inches.

SHIELD EXPANSION (LAG, MACHINE AND EXTERNALLY THREADED WEDGE BOLT ANCHORS)

DLA MS51845 REV C-1994 90 度直螺纹 黄铜或青铜弯管 等级125

Provided by IHSNot for ResaleNo reproduction or networking permitted without license from HIS

ELBOWS, PIPE, BRASS OR BRONZE, THREADED, 90-DEG., STRAIGHT, CLASS 125

BS 2A 231:1993 螺栓用滚压螺纹.螺纹引导和收尾要求

Specifies requirements and inspection method used in case of dispute.

Rolled threads for bolts - Lead and runout requirements

ISO 3353:1992 航空航天.螺栓用轧制螺纹.铅和跳动要求

Aerospace — Rolled threads for bolts — Lead and runout requirements

SAE MA1566A-1992 MJ公制螺纹的测量惯例和测量要求

This standard covers the gaging practice and gage requirements for aerospace metric screw threads, MJ profile in accordance with MA1370. To establish the gaging system in accordance with ANSI/ASME/B 1.3M for final assessment of dimensional acceptability of the product complete thread (excluding the incomplete lead or runout thread).

Gaging Practice and Gage Requirements for MJ Metric Screw Threads