49.030.10 螺纹 标准查询与下载

DLA MS39232 REV B-1983 (150和300磅)右手螺纹变径管

Material sh:rl be in accordance with ANSI 816.3.

REDUCER, PIPE RIGHT HAND THREAD (150 AND 300 POUNDS)

ISO 5855-1:1981 航空航天结构MJ螺纹第1部分:基本轮廓

Aerospace construction — MJ threads — Part 1: Basic profile

ISO 5855-2:1981 航空航天.MJ螺纹.第2部分:螺栓和螺母的尺寸

Aerospace construction — MJ threads — Part 2: Dimensions for bolts and nuts

SAE AS3062C-1979 螺栓,螺杆和螺母,螺纹要求

1. This standard establishes the rolled thread element tolerances for lead, half-angle, taper, andout-of-roundness for studs used in aerospace construction; it also establishes the requirements forlead threads and runout threads for these studs.2. This standard defines the requirements for runout threads and lead threads for bolt and screw rolledthreads used in aerospace construction; it also specifies a referee method, by optical projection, forestablishing conformity with these requirements which agree with ISO 3353.3 .The bolt and screw lead and runout thread requirements are also applicable to other externallythreaded products where the threads are produced by rolling.

Bolts, Screws and Studs, Screw Thread Requirements

SAE AS1508-1979 直螺纹根切.公制

This standard provides recommended dimensional data for screw thread undercuts for straight MJ metric screw threads in accordance with AS1370.

Undercuts for Straight Screw Threads - Metric

DLA MS51520 REV A-1979 37度扩口式管螺纹接套舱壁

The General Services Administration has authorized the use of this commercial item description as a replacement for Military Specifications MIL-V-16720E and MIL-V-16721D which are cancelled.

NIPPLE, TUBE, BULKHEAD, 37 DEGREE FLARED [Refer To: SAE J514, SAE J514, SAE J514, SAE J514, SAE J514]

DLA MS51504 REV A-1979 37度扩口法兰 90度弯头外螺纹管端弯管

UTERIN,: Steel,carbon in accordance with procuruentr pecification.Steel,corrosion resist in 6 in accordance with procurementr pecification.

ELBOW, PIPE TO TUBE, 90 DEGREE MALE PIPE END, 37 DEGREE FLARED [Refer To: SAE J514, SAE J514, SAE J514, SAE J514, SAE J514]

DLA MS51508 REV A-1979 37度扩口式弯管 45度外螺纹管端

Steel carbon i n accordance with 'procurement rpecification.

ELBOW, PIPE TO TUBE, 45 DEGREE MALE PIPE END, 37 DEGREE FLARED [Refer To: SAE J514, SAE J514, SAE J514, SAE J514, SAE J514]

DLA MS51511 REV A-1979 37度扩口式三岔管 在管道上的管端外螺纹

The General Services Administration has authorized the use of this commercial item description as a replacement for Military Specifications MIL-V-16720E and MIL-V-16721D which are cancelled.

TEE, PIPE TO TUBE, MALE PIPE ON RUN, 37 DEGREE FLARED [Refer To: SAE J514, SAE J514, SAE J514, SAE J514, SAE J514]

DLA MS51512 REV A-1979 37度扩口式三岔管 外螺纹管转移

MATERIAL: Steel , carbon I n accordance with procurrent rpecification.

TEE, PIPE TO TUBE, MALE PIPE ON BRANCH, 37 DEGREE FLARED

DLA MS51513 REV A-1979 37度扩口式三岔管 外螺纹管转移

steel, carbon I n accordance with procurement specification.

TEE, PIPE TO TUBE, FEMALE PIPE ON BRANCH, 37 DEGREE FLARED [Refer To: SAE J514, SAE J514, SAE J514, SAE J514, SAE J514]

DLA MS51518 REV A-1979 37度扩口式机用螺纹插塞

The General Services Administration has authorized the use of this commercial item description as a replacement for Military Specifications MIL-V-16720E and MIL-V-16721D which are cancelled.

PLUG, MACHINE THREAD, 37 DEGREE FLARED [Refer To: SAE J514, SAE J514, SAE J514, SAE J514, SAE J514]

DLA MS51519 REV A-1979 37度扩口式 供O型圈使用 大六边形管螺纹接套

JUTLRIN: Steel.carboninaccordancewith Drocurement suecification. Steel'corrosion-resistin6inaccbrdancewithbrocurementspecification.

NIPPLE, TUBE, LARGE HEX, FOR USE WITH O-RING, 37 DEGREE FLARED [Refer To: SAE J514, SAE J514, SAE J514, SAE J514, SAE J514]

ISO 3353:1976 航空航天结构.轧制螺纹.跳动和导程螺纹

Aerospace construction — Rolled threads — Runout and lead threads

SAE AS1338-1976 航空米制60螺纹截面和公差分级

This Aerospace Standard establishes the details of the maximum and minimum thread profile and tolerance classes for the metric 60 screw threads recommended for use in the aerospace industry for metric module bolts and nuts.

Aerospace Metric 60 Degree Screw Thread Profile and Tolerance Classes

SAE AS1337A-1974 螺母和螺栓用米制60螺纹的选择航空直径-螺距组合

Entirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising therefrom, is the sole responsibility of the user.”SAE reviews each technical report at least every five years at which time it may be reaffirmed, revised, or cancelled. SAE invites your written comments and suggestions.Copyright © 2006 SAE InternationalAll rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical,photocopying, recording, or otherwise, without the prior written permission of SAE.Selected Aerospace Diameter Pitch Combinations of Metric 60 Degree Screw Threads for Nuts and Bolts.

Selected Aerospace Diameter Pitch Combinations of Metric 60 Degree Screw Threads for Nuts and Bolts

NF L22-090:1964 修配用大直径标准螺钉,销和垫圈.

Standardized screws, pins and washers with increased diameter intended for repair work.

NF L05-200:1966 米制螺纹.ISO米制螺纹剖面.(RECH.)

METRIC SCREW THREADS. SIM PROFILE. (RECH.).

HB/Z 10-1972 铝、镁合金基体光孔上螺桩

本指导性技术文件适用于铸造铝、镁合金基体光孔上螺桩。文件推荐了光孔型式、尺寸、公差、技术要求及螺桩所用的螺纹。

Aluminum, magnesium alloy substrate unthreaded hole upper screw stud