49.030.20 螺栓、螺钉、螺柱 标准查询与下载
共找到 2142 条与 螺栓、螺钉、螺柱 相关的标准，共 143 页
Scope is not provided for this standard
Aerospace -- Bolts, with MJ threads, in titanium alloys, strength class 1100 MPa -- Procurement specification
- ICS
- 49.030.20
- CCS
- 发布
- 2013-09-09
- 实施
This International Standard specifies the dimensions of metric internal, offset cruciform, ribbed drives used in metric screws in the nominal thread diameter range of 3 mm to 20 mm. Drivers and gauges used in conjunction with these drives are defined in ISO 14277 and ISO 14278.
Aerospace -- Drives, internal, offset cruciform, ribbed -- Metric series
- ICS
- 49.030.20
- CCS
- 发布
- 2013-09-09
- 实施
This International Standard specifies the dimensions of normal bihexagonal head bolts, with normal or pitch diameter shank, and long length MJ threads, in metallic material, coated or uncoated, with strength classes less than or equal to 1 100 MPa. It is intended for the drawing up of aerospace product standards.
Aerospace -- Bolts, normal bihexagonal head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa -- Dimensions
- ICS
- 49.030.20
- CCS
- 发布
- 2013-09-09
- 实施
This International Standard specifies the dimensions of metric ribbed drivers which are inserted into internal offset cruciform ribbed or unribbed drives used in metric screws in the nominal thread diameter range of 1,6 mm to 20 mm. The internal offset cruciform, ribbed drives and unribbed drives, respectively are defined in ISO 14275 and ISO 14276.
Aerospace -- Drivers, ribbed, for internal offset cruciform ribbed or unribbed drives -- Metric series
- ICS
- 49.030.20
- CCS
- 发布
- 2013-09-09
- 实施
This International Standard specifies the dimensions of large bihexagonal head bolts, with close or large tolerance normal shank and short or medium length MJ threads, in metallic material, coated or uncoated, with strength classes 1 250 MPa to 1 800 MPa. This International Standard is applicable to the compilation of aerospace product standards.
Aerospace -- Bolts, large bihexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes 1 250 MPa to 1800 MPa -- Dimensions
- ICS
- 49.030.20
- CCS
- 发布
- 2013-09-09
- 实施
This International Standard specifies the dimensions of metric gauges which check internal offset cruciform drives, ribbed or unribbed, used in metric screws in the nominal thread diameter range of 1,6 mm to 20 mm. The internal offset cruciform drives, ribbed drives and unribbed, respectively are defined in ISO 14275 and ISO 14276.
Aerospace -- Gauges, for internal offset cruciform ribbed or unribbed drives -- Metric series
- ICS
- 49.030.20
- CCS
- 发布
- 2013-09-09
- 实施
This International Standard specifies the dimensions of normal spline head bolts, with close or large tolerance normal shank and short or medium length MJ threads, in metallic material, coated or uncoated, with strength classes less than or equal to 1 100 MPa. This International Standard is applicable to the compilation of aerospace product standards.
Aerospace -- Bolts, normal spline head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa -- Dimensions
- ICS
- 49.030.20
- CCS
- 发布
- 2013-09-09
- 实施
This International Standard specifies the dimensions of pan head screws with internal offset cruciform ribbed or unribbed drive, stepped shank, short or medium length MJ threads, in metallic material, coated or uncoated, with strength classes less than or equal to 1 100 MPa. This International Standard is applicable to the compilation of aerospace product standards.
Aerospace -- Screws, pan head, internal offset cruciform ribbed or unribbed drive, stepped shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa -- Dimensions
- ICS
- 49.030.20
- CCS
- 发布
- 2013-09-09
- 实施
This International Standard specifies the dimensions of metric internal six-lobe drives used in metric screws in nominal thread diameter range 3 mm to 20 mm. NOTE Pending publication of an International Standard relating to limit gauges, special care is required to ensure that the dimensions and tolerances specified in this International Standard are confirmed by alternative means.
Aerospace -- Internal six-lobe drives -- Metric series
- ICS
- 49.030.20
- CCS
- 发布
- 2013-09-09
- 实施
This International Standard specifies the dimensions of metric ribbed drivers which are inserted into internal cruciform ribbed or unribbed drives used in metric screws in the nominal thread diameter range of 1,6 mm to 20 mm. The internal cruciform drives, ribbed and unribbed, are defined respectively in ISO 12256 and ISO 14279.
Aerospace -- Drivers, ribbed, for internal cruciform ribbed or unribbed drives -- Metric series
- ICS
- 49.030.20
- CCS
- 发布
- 2013-09-09
- 实施
This International Standard specifies the dimensions of large hexagonal head bolts, with normal or pitch diameter shank, and long length MJ threads, in metallic material, coated or uncoated, with strength classes less than or equal to 1 100 MPa. It is intended for the drawing up of aerospace product standards.
Aerospace -- Bolts, large hexagonal head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa -- Dimensions
- ICS
- 49.030.20
- CCS
- 发布
- 2013-09-09
- 实施
This International Standard specifies test methods for bolts for aerospace constructions. It is applicable whenever quoted in reference.
Aerospace -- Bolts -- Test methods
- ICS
- 49.030.20
- CCS
- 发布
- 2013-09-09
- 实施
This International Standard specifies the characteristics and quality assurance requirements for MJ thread bolts made of alloy steel, of strength class 1 100 MPa, for aerospace construction. It is applicable whenever it is referenced in a definition document.
Aerospace -- Bolts, with MJ threads, made of alloy steel, strength class 1100 MPa -- Procurement specification
- ICS
- 49.030.20
- CCS
- 发布
- 2013-09-09
- 实施
Not Available
Aerospace -- Screws, pan head, internal offset cruciform ribbed or unribbed drive, threaded to head, MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa -- Dimensions
- ICS
- 49.030.20
- CCS
- 发布
- 2013-09-09
- 实施
This International Standard specifies the dimensions of metric internal, offset cruciform drives used in metric screws in the nominal thread diameter range of 1,6 mm to 20 mm. Drivers and gauges used in conjunction with these drives are defined in ISO 14277 and ISO 14278
Aerospace -- Drives, internal, offset cruciform -- Metric series
- ICS
- 49.030.20
- CCS
- 发布
- 2013-09-09
- 实施
This International Standard specifies the characteristics and quality assurance requirements for MJ thread bolts made of heat and corrosion resisting steel, of strength class 1 100 MPa, for aerospace construction. It is applicable whenever it is referenced in a definition document.
Aerospace -- Bolts, with MJ threads, made of heat and corrosion resisting steel, strength class 1 100 MPa -- Procurement specification
- ICS
- 49.030.20
- CCS
- 发布
- 2013-09-09
- 实施
Scope is not provided for this standard
Aerospace -- Bihexagonal drives -- Wrenching configuration -- Metric series
- ICS
- 49.030.20
- CCS
- 发布
- 2013-09-09
- 实施
This International Standard specifies the tolerances of form and position applicable to all types of metric bolts and screws in the nominal thread diameter range 3 mm to 24 mm used in aerospace construction. It is intended for the drawing up of aerospace product standards.
Aerospace -- Bolts and screws, metric -- Tolerances of form and position
- ICS
- 49.030.20
- CCS
- 发布
- 2013-09-09
- 实施
This International Standard specifies the dimensions of metric internal cruciform ribbed drives used in metric screws in the nominal thread diameter range of 3 mm to 20 mm. Drivers and gauges used in conjunction with these drives are defined in ISO 14280 and ISO 14281.
Aerospace -- Drives, internal, cruciform, ribbed -- Metric series
- ICS
- 49.030.20
- CCS
- 发布
- 2013-09-09
- 实施
Scope is not provided for this standard
Aerospace -- Spline drives -- Wrenching configuration -- Metric series
- ICS
- 49.030.20
- CCS
- 发布
- 2013-09-09
- 实施
