49.030.99 其他紧固件 标准查询与下载

LST EN 4109-2007 航天系列-扳手、平头扳手

Aerospace series - Wrenches, face spanner

LST EN 4110-2007 航空航天系列扳手，开口，盒

Aerospace series - Wrenches, open end, box

LST EN 4356-2007 航空航天系列 六叶槽 短驱动器

Aerospace series - Six lobe recess - Drivers, short

LST EN 4358-2007 航空航天系列 六叶槽 驱动器，双头，90°

Aerospace series - Six lobe recess - Drivers, double ended, 90°

LST EN 4357-2007 航空航天系列 六瓣凹槽 驱动器、把手

Aerospace series - Six lobe recess - Drivers, handle

DS/EN 2544:2007 航空航天系列 航空航天设备图纸上铆钉的表示

This standard specifies the representation of rivets on drawings for aerospace equipment.

Aerospace series - Representation of rivets on drawings for aerospace equipment

DIN EN 2602:2007 航空航天系列.带锁环的螺纹适配器用端口.几何形状

This standard specifies the dimensional characteristics of ports for the adaptors, threaded, with lockring, assembly with elastomer-O-ring, for aerospace applications. This standard applies to all adaptors with lockring whose port end is defined by EN 2603.

Aerospace series - Ports for adaptors, threaded, with lockring - Geometric configuration; German and English version EN 2602:2005

DIN EN 2603:2007 航空航天系列.带锁环的螺纹适配器用端口.几何形状

This standard specifies the dimensional characteristics of the port ends for adaptors, threaded, with lockring, assembly with elastomer O ring, for aerospace applications. This standard applies to all port ends for adaptors, threaded, with lockring installed in parts defined by EN 2602 and from EN 2607.

Aerospace series - Port ends for adaptors, threaded, with lockring - Geometric configuration; German and English version EN 2603:2005

DIN EN 2605:2007 航空航天系列.带锁环的螺纹适配器用24°接口.几何形状

Aerospace series - 24° interface for adaptors, threaded, with lockring - Geometric configuration; German and English version EN 2605:2005

DIN EN 2607:2007 航空航天系列.用锁住方式连接适配器用O型密封圈.测量

This standard specifies the O-ring for adaptors with lockring and the dimensions.

Aerospace series - O-rings for adaptors, threaded, with lockring - Survey; German and English version EN 2607:2005

DIN EN 4111:2007 航空航天系列.管件的花键套筒扳手.技术规范

This standard specifies the requirements which must be met by hand-operated splined wrenches and sockets for aerospace applications.

Aerospace series - Wrenches, splined, socket for pipe fittings - Technical specification; German and English version EN 4111:2006

DS/EN 4359:2007 航空航天系列 六叶槽 驱动器 技术规范

This standard specifies the characteristics, qualification and acceptance requirements for drivers for installing and removing screws and bolts having six lobe recess internal drive.

Aerospace series - Six lobe recess - Drivers - Technical specification

DS/EN 4357:2007 航空航天系列 六瓣凹槽 驱动器、把手

This standard specifies the characteristics of drivers, handle, six lobe recess, for aerospace applications.

Aerospace series - Six lobe recess - Drivers, handle

DS/EN 4358:2007 航空航天系列 六叶槽 驱动器，双头，90°

This standard specifies the characteristics of drivers, double ended, 90°, six lobe recess, for aerospace applications.

Aerospace series - Six lobe recess - Drivers, double ended, 90°

DS/EN 4356:2007 航空航天系列 六叶槽 短驱动器

This standard specifies the characteristics of drivers, short, six lobe recess, for aerospace applications.

Aerospace series - Six lobe recess - Drivers, short

DS/EN 4110:2007 航空航天系列扳手，开口，盒

This standard specifies the characteristics of open end box wrenches for splined nuts for aerospace applications.

Aerospace series - Wrenches, open end, box

DS/EN 4354:2007 航空航天系列 六叶凹陷 司机，如释重负

This standard specifies the characteristics of drivers, relieved, six lobe recess, for aerospace applications.

Aerospace series - Six lobe recess - Drivers, relieved

DS/EN 4109:2007 航天系列-扳手、平头扳手

This standard specifies the characteristics of spanner face wrenches for splined nuts for aerospace applications.

Aerospace series - Wrenches, face spanner

DS/EN 4108:2007 航空航天系列 扳手、鱼尾纹、连接套筒、套筒驱动

This standard specifies the characteristics of crow foot wrenches for splined nuts for aerospace applications.

Aerospace series - Wrenches, crow foot, attachment socket, socket drive

DIN EN 3709:2007 航空航天系列.十二角扳手和套筒.技术规范

This standard specifies the requirements to be complied with by wrenches and double-hex sockets intended for aerospace products.

Aerospace series - Wrenches and sockets, bi-hexagonal - Technical specification; German and English version EN 3709:2006