49.030.99 其他紧固件 标准查询与下载

SAE AS85052/1A-2008 基于耐液压液的燃料和石油的275℉,17-7 PH管环形夹具

Clamp, Loop, tube 17-7 PH , 275°F, Fuel and Petroleum Based Hydraulic Fluid Resistant

Clamp, Loop, tube 17-7 PH , 275°F, Fuel and Petroleum Based Hydraulic Fluid Resistant

SAE AS85052/2A-2008 耐磷酸酯液体的275℉管17-7PH Cres环形夹具

Clamp, Loop, Tube 17-7PH ,cres,275°F, Phosphate Ester Fluid Resistant

Clamp, Loop, Tube 17-7PH ,cres,275°F, Phosphate Ester Fluid Resistant

SAE AS85052A-2008 加衬垫的环型夹具装配用通用规范

This SAE Aerospace Standard (AS) defines the requirements for loop type clamps primarily intended for general clampingof tubing for aircraft hydraulic systems.

Clamp Assembly, Loop Type, Cushioned, General Specification for

DS/EN 3819:2008 航空航天系列 扳手和套筒的间隙

This standard defines the minimum clearance area required around nuts and bolt heads when using either double hexagon box or socket wrenches defined in AECMA standard.

Aerospace series - Clearance for wrenches and sockets

BS EN 3729:2008 航空航天系列.镀银的FE-PA92HT(A286)型耐热钢左旋螺纹自锁紧螺纹环

This standard specifies the characteristics of threaded, self-locking rings, with left-hand threads, in FE-PA92HT, silver plated, chiefly used for axial location of bearing outer rings. Maximum test temperature of the parts: 450 °C. NOTE These parts are designed to be used with 4H6H internal threads.

Aerospace series - Rings, threaded, self-locking, left-hand thread, in heat resisting steel FE-PA92HT (A286), silver plated

BS EN 3915:2008 航空航天系列.部件修复用NI-PH2601(NI-P100HT、Inconel 718)型耐热镍基合金、MJ螺纹、自锁紧薄壁插件.等级:1275MPa(室温)/550℃.技术规范

This standard specifies the characteristics, qualification and acceptance requirements for self-locking thin wall salvage inserts with MJ threads in NI-PH2601 (NI-P100HT). Classification: 1 275 MPa 1) / 550 °C 2).

Aerospace series - Insert, thin wall, self-locking, MJ threads, in heat resisting nickel base alloy NI-PH2601 (NI-P100HT, Inconel 718), for salvage of components - Classification: 1275 MPa (at ambient temperature) / 550 °C - Technical specification

DS/EN 3729:2008 航空航天系列 环，螺纹，自锁，左旋螺纹，耐热钢 FE-PA92HT（A286），镀银

This standard specifies the characteristics of threaded, self-locking rings, with left-hand threads, in FE PA92HT, silver plated, chiefly used for axial location of bearing outer rings.Maximum test temperature of the parts: 450 °C.NOTE These parts are designed to be used with 4H6H internal threads.

Aerospace series - Rings, threaded, self-locking, left-hand thread, in heat resisting steel FE-PA92HT (A286), silver plated

DS/EN 3915:2008 航空航天系列 插入件，薄壁，自锁，MJ 螺纹，耐热镍基合金 NI-PH2601（NI-P100HT，Inconel 718），用于部件修复 分类：1275 MPa（在环境温度下）/ 550掳C 技术规范

This standard specifies the characteristics, qualification and acceptance requirements for self-locking thin wall salvage inserts with MJ threads in NI-PH2601 (NI P100HT).Classification: 1 275 MPa ) / 550 °C ).

Aerospace series - Insert, thin wall, self-locking, MJ threads, in heat resisting nickel base alloy NI-PH2601 (NI-P100HT, Inconel 718), for salvage of components - Classification: 1 275 MPa (at ambient temperature) / 550 °C - Technical specification

DS/EN 3298:2008 航空航天系列 插入件，薄壁，自锁 安装和拆卸程序

This standard specifies the conditions of installation and removal (hole serration profile, tools, swaging procedure) of self-locking thin wall inserts defined by EN standards, for aerospace applications.

Aerospace series - Inserts, thin wall, self-locking - Installation and removal procedure

DS/EN 3710:2008 航空航天系列 双六角套筒 技术规范

This standard specifies the properties of double-hex sockets for aerospace use.

Aerospace series - Sockets, bi-hexagonal - Technical Specification

DS/EN 3711:2008 航空航天系列双头双六角扳手直式、曲柄式、偏置式

This standard specifies the properties of the following types of double end box wrenches: double head flat, double head offset and double end modified offset.

Aerospace series - Wrench-double ended, bi-hexagonal - Straight, cranked, offset

EN 3819:2008 航空航天系列.扳手和和套管的间隙

This standard defines the minimum clearance area required around nuts and bolt heads when using either double hexagon box or socket wrenches defined in AECMA standard.

Aerospace series - Clearance for wrenches and sockets

BS EN 3781:2008 航空航天系列.弹簧绕制固定环用槽.设计标准

This standard defines the groove dimensions for retaining rings. It is applicable for rings as per MA4016 for use on external grooves and rings as per MA4017 for use on internal grooves.

Aerospace series — Grooves for spiral wound retaining rings — Design standard

BS EN 4302:2008 航空航天系列.方形驱动开环插入工具

This standard specifies the characteristics of open ring insert tools for splined nuts, metric for aerospace applications.

Aerospace series - Open ring insert tool, square drive

DS/EN 3781:2008 航空航天系列 螺旋缠绕式挡圈用槽 设计标准

This standard defines the groove dimensions for retaining rings. It is applicable for rings as per MA4016 for use on external grooves and rings as per MA4017 for use on internal grooves.

Aerospace series - Grooves for spiral wound retaining rings - Design standard

DS/EN 4302:2008 航天系列-开口环插入工具，四方驱动

This standard specifies the characteristics of open ring insert tools for splined nuts, metric for aerospace applications.

Aerospace series - Open ring insert tool, square drive

DS/EN 4355:2008 航空航天系列 六叶槽 驱动器，插座

This standard specifies the characteristics of drivers, socket, six lobe recess, for aerospace applications.

Aerospace series - Six lobe recess - Drivers, socket

EN 3729:2008 航空航天系列.镀银的FE-PA92HT(A286)型耐热钢左旋螺纹自锁紧螺纹环

This standard specifies the characteristics of threaded, self-locking rings, with left-hand threads, in FE-PA92HT, silver plated, chiefly used for axial location of bearing outer rings. Maximum test temperature of the parts: 450 ℃. NOTE These parts are designed to be used with 4H6H internal threads.

Aerospace series - Rings, threaded, self-locking, left-hand thread, in heat resisting steel FE-PA92HT (A286), silver plated

EN 3915:2008 航空航天系列.部件修复用NI-PH2601(NI-P100HT,Inconel 718)型耐热镍基合金,MJ螺纹,自锁紧薄壁插入件.等级-1275MPa(室温)/550℃.技术规范

This standard specifies the characteristics, qualification and acceptance requirements for self-locking thin wall salvage inserts with MJ threads in NI-PH2601 (NI-P100HT). Classification:1275 MPa 1) / 550 ℃ 2).

Aerospace series - Insert, thin wall, self-locking, MJ threads, in heat resisting nickel base alloy NI-PH2601 (NI-P100HT, Inconel 718), for salvage of components - Classification: 1275 MPa (at ambient temperature) / 550 °C - Technical specification

CEN EN 3915-2008 航空航天系列 插入件，薄壁，自锁，MJ 螺纹，耐热镍基合金 NI-PH2601（NI-P100HT，Inconel718），用于部件的修复 分类：1 275 MPa（环境温度）/ 550°C -技术规格

This standard specifies the characteristics, qualification and acceptance requirements for self-locking thin wall salvage inserts with MJ threads in NI-PH2601 (NI-P100HT). Classification: 1 275 MPa / 550 °C .

Aerospace series - Insert, thin wall, self-locking, MJ threads, in heat resisting nickel base alloy NI-PH2601 (NI-P100HT, Inconel 718), for salvage of components - Classification: 1 275 MPa (at ambient temperature) / 550 °C - Technical specification