共找到 771 条与 起重设备附件 相关的标准,共 52 页
This International Standard specifies the general characteristics, performance and critical dimensions necessary for interchangeability and compatibility with other components, of forged steel eyebolts grade 4 for general lifting purposes. These eyebolts can be used for axial and inclined loading.This International Standard specifies the dimensions of the eyes of eyebolts permitting direct connection with shackles of the same working load limit as those defined in ISO 2415. These dimensions also allow designs with a larger eye which can permit direct connection with sling hooks of similar working load limit.This International Standard covers all significant
Forged steel eyebolts grade 4 for general lifting purposes (Incorporates Amendment A1: 2015)
Cargo lifting gear - Accessories and fittings for lifting - Ramshorn shank hooks with metric thread, with double lug, with eye
This International Standard specifies the general characteristics, performance and critical dimensions necessary for interchangeability and compatibility with other components, of forged steel eyebolts grade 4 for general lifting purposes. These eyebolts can be used for axial and inclined loading. This International Standard specifies the dimensions of the eyes of eyebolts permitting direct connection with shackles of the same working load limit as those defined in ISO 2415. These dimensions also allow designs with a larger eye which can permit direct connection with sling hooks of similar working load limit. This International Standard covers all significant hazards, hazardous situations and events relevant to eyebolts grade 4 as defined in Clause 4. This International Standard is applicable to eyebolts grade 4 for use in the temperature range of ?20 ?C to 200 ?C. This International Standard is not applicable to eyebolts which are not forged in one piece. This International Standard is not applicable to forged steel eyebolts grade 4 manufactured before the date of its publication as an International Standard.
Forged steel eyebolts grade 4 for general lifting purposes
Cargo lifting gear - Accessories and fittings for lifting - Cargo hook swifels
Cargo lifting gear - Accessories and fittings for lifting - Cargo hooks
Cargo lifting gear - Accessories and fittings for lifting and mooring - Cargo shackles
Cargo lifting gear - Accessories and fittings for lifting - Round nuts
Round slings for lifting purposes (Amendment 1)
Specifies general requirements for forged steel components of Grade 8 up to 63 t working load limit (WLL), mainly for use in chain slings, steel wire rope slings, and textile slings intended for lifting objects, materials or goods. Is not applicable to
Forged steel lifting components for use with Grade 8 chain
B30.9 includes provisions that apply to the fabrication, attachment, use, inspection, and maintenance of slings used for lifting purposes and used in conjunction with equipment described in other volumes of the B30 Standard.
Slings
The document contains provisions that apply to the construction, installation, operation, inspection, testing, maintenance, and use of cranes and other lifting and material-handling related equipment. It does not apply to track and automotive jacks, railway or automobile wrecking cranes, shipboard cranes, shipboard cargo-handling equipment, well-drilling derricks, skip hoists, mine hoists, truck body hoists, car or barge pullers, conveyors, excavating equipment, or equipment covered under the scope of the following standards: A10, A17, A90, A92, A120, B20, B56, and B77.
Slings
Hooks for lifting freight containers of up to 30 tonnes capacity-Basic requirements
This European Standard specifies safety requirements for spreaders used with cranes designed for the purpose of handling ISO containers based on ISO 668 including other lengths such as 45 ft. The connection between the spreader and the container is by the use of twistlocks that engage into the container""s upper corner castings.The standard deals with all significant hazards, hazardous situations and events relevant to container handling spreaders, when used as intended and under conditions foreseen by the manufacturer (see Clause 4).The spreader is interfaced to the crane""s control and safety system.This European Standard does not cover the following type
Cranes - Requirements for container handling spreaders
This European Standard specifies safety requirements for the following non-fixed load lifting attachments for cranes, hoists and manually controlled load manipulating devices: -- plate clamps; -- vacuum lifters; -- self priming, -- non-self priming (pump, venturi, turbine); -- electric lifting magnets (battery fed and mains-fed); -- permanent lifting magnets; -- electro-permanent lifting magnets; -- lifting beams; -- C-hooks; -- lifting forks; -- clamps; defined in clause 3. This standard does not specify the additional requirements for: non fixed load lifting attachments in direct contact with foodstuffs or pharmaceuticals requiring a high level of cleanliness for hygiene reasons; hazards resulting from handling specific hazardous materials (e.g. explosives, hot molten masses, radiating materials); -- hazards caused by operation in an explosive atmosphere; -- hazards caused by noise; -- electrical hazards; -- hazards due to hydraulic and pneumatic components. This standard does not cover the hazards related to mechanical strength of structural elements of attachments designed for more than 20 000 lifting cycles. NOTE The coefficient of utilization specified in clause 5.1.1 ensures that no fatigue verification is needed for less than 20 000 cycles. This is in accordance with the well accepted calculation codes e.g. FEM 1001. This standard does not cover attachments intended to lift above people. This standard does not cover slings, ladles, expanding mandrels, buckets, grabs, or grab buckets. The hazards covered by this European Standard are identified in clause 4. This European Standard does not cover hazards related to the lifting of persons. This European Standard is applicable to non-fixed load lifting attachments which are manufactured after the date of approval by CEN of this standard. q
Cranes - Safety - Non-fixed load lifting attachments(includes Amendment A2:2009); English version of DIN EN 13155:2009-08
Cranes - Safety - Non-fixed load lifting attachments
Short link chains for lifting purposes - Grade TH, fine tolerance for manually operated chain hoists
Short link chains for lifting purposes. Grade TH, fine tolerance for manually operated chain hoists
This European Standard specifies safety requirements for the following non-fixed load lifting attachments for cranes, hoists and manually controlled load manipulating devices: - plate clamps;- vacuum lifters;- self priming,- non-self priming (pump, venturi, turbine);- electric lifting magnets (battery fed and mains-fed);- permanent lifting magnets;- electro-permanent lifting magnets;- lifting beams;- C-hooks;- lifting forks;- clamps;defined in clause 3.This standard does not specify the additional requirements for:- non fixed load lifting attachments in direct contact with foodstuffs or pharmaceuticals requiring a high level of cleanliness for hygiene reaso
Cranes - Safety - Non-fixed load lifting attachments
Cranes - Safety - Non-fixed load lifting attachments.
Cranes - Safety - Non-fixed load lifting attachments.
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号