53.040.10 输送机 标准查询与下载
共找到 392 条与 输送机 相关的标准，共 27 页
Continuous mechanical handling equipment for loose bulk materials — Screw conveyors
- ICS
- 53.040.10
- CCS
- 发布
- 20211012
- 实施
- 20211012
Continuous handling equipment and systems - Safety requirements for fixed belt conveyors for bulk materials
- ICS
- 53.040.10
- CCS
- J81
- 发布
- 2021-10-06
- 实施
- 2021-11-13
1.1 This document deals with the technical requirements for stationary belt conveyors and systems as defined in 3.1 to 3.2.4, designed for continuously conveying loose bulk materials. The covered phases of life cycle are design, setting, operation, maintenance and cleaning. 1.2 This document does not cover: a) use in coal mining and open cast lignite mining; b) use for man-riding; c) floating, dredging and ship mounted structures supporting the conveyor; d) biological and chemical hazards resulting from handling foodstuffs or pharmaceuticals; e) the design of the supporting structure which is not part of a conveyor; f) the effects of wind; g) hazards resulting from handling specific hazardous materials, (e.g. explosives, radiating material); h) hazards resulting from contact with or inhalation of harmful fluids, gases, mists, fumes or dust; i) biological and micro-biological (viral or bacterial) hazards; j) hazards caused by the use of ionising radiation sources; k) conveyors fitted with a moving belt with other than a continuous rubber or polymeric surface for the conveying medium; l) hazards associated with the integration of belt conveyors with other machinery; The safety requirements of this document apply to equipment and systems placed on the market after the date of publication of this document. NOTE Directive 2014/34/EC concerning equipment and protective systems intended for operation in potentially explosive atmospheres can be applicable to the type of machine or equipment covered by this European Standard. The present document is not intended to provide means of complying completely with the essential health and safety requirements of Directive 2014/34/EC.
Continuous handling equipment and systems - Safety requirements for fixed belt conveyors for bulk materials
- ICS
- 53.040.10
- CCS
- 发布
- 2021-10-06
- 实施
- 2022-01-31
本文件规定了快递物流用带式伸缩输送机（以下简称输送机）的型式和基本参数、技术要求、试验方法、检验规则、标志、包装、贮存和运输。
Belt Telescopic Conveyor For Express Logistics
- ICS
- 53.040.10
- CCS
- C343
- 发布
- 2021-09-08
- 实施
- 2022-02-10
本文件规定了回转式连续垂直输送机的术语和定义、分类、型号及参数、技术要求、试验方法、检验规则、标志、包装、运输和贮存。
Continuous Vertical Conveyor
- ICS
- 53.040.10
- CCS
- C343
- 发布
- 2021-09-01
- 实施
- 2022-04-14
This Standard applies to the design, construction, installation, maintenance, inspection, and operation of conveyors and conveying systems in relation to hazards. The conveyors may be of the bulk material, package, or unit-handling types, where the installation is designed for permanent, temporary, or portable operation. This Standard shall apply, with the exceptions noted below, to all conveyor installations. This Standard specifically excludes any conveyor designed, installed, or used primarily for the movement of people. This Standard does, however, apply to certain conveying devices that incorporate within their supporting structure workstations or operator’s stations specifically designed for authorized operating personnel. This Standard does not apply to conveyors for which specific standards are already in effect, or to equipment such as industrial trucks, tractors, trailers, automatic guided vehicles, tiering machines (except pallet load tierers), cranes, hoists, power shovels, power scoops, bucket drag lines, trenchers, platform elevators designed to carry passengers or an operator, manlifts, moving walks, moving stairways (escalators), highway or railroad vehicles, cableways, tramways, dumbwaiters, material lifts, industrial scissors lifts, pneumatic conveyors, robots, or integral machine transfer devices. Some of the foregoing have specific standards. The provisions of this Standard shall apply to equipment installed 1 yr after the date of issuance. 本标准适用于输送机和输送系统与危险相关的设计、建造、安装、维护、检查和操作。输送机可以是散装材料、包装或单元处理类型，其中安装设计为永久、临时或便携式操作。除下述情况外，本标准适用于所有输送机安装。本标准明确排除了任何设计、安装或主要用于人员移动的输送机。但是，本标准适用于在其支撑结构工作站或专门为授权操作人员设计的操作员站内包含的某些输送设备。本标准不适用于特定标准已经生效的输送机，也不适用于工业卡车、拖拉机、拖车、自动导引车、分层机（托盘负载分层机除外）、起重机、起重机、动力铲、动力铲、铲斗拖线、挖沟机、设计用于载客或操作员的平台电梯、载人、自动人行道、移动楼梯（自动扶梯）、 公路或铁路车辆、索道、有轨电车、哑巴、物料升降机、工业剪刀式升降机、气动输送机、机器人或一体式机器传输装置。上述一些有特定的标准。本标准的规定适用于发布之日起1年后安装的设备。
Safety Standard for Conveyors and Related Equipment
- ICS
- 53.040.10
- CCS
- J81
- 发布
- 2021-08-31
- 实施
- 2021-08-31
Belt weighers -- Part 1: Metrological and technical requirements (Amendment 1)
- ICS
- 53.040.10
- CCS
- A53
- 发布
- 2021-03-22
- 实施
Belt weighers -- Part 1: Metrological and technical requirements
- ICS
- 53.040.10
- CCS
- A53
- 发布
- 2021-03-22
- 实施
Mining equipment. Mining belt conveyors. Drums. General specifications
- ICS
- 53.040.10
- CCS
- 发布
- 2021-00-00
- 实施
- 2021-09-01
本文件确立了再制造刮板输送机的规范性引用文件、术语和定义、基本要求、拆解、清洗、检测与 分类、再制造工艺要求、验收要求、质量保证、标志、包装、运输和贮存。 本文件适用于煤矿用再制造矿用刮板输送机（以下简称刮板机）。
General technical requirements for remanufacturing mining scraper conveyors
- ICS
- 53.040.10
- CCS
- C351
- 发布
- 2020-12-29
- 实施
- 2022-01-21
Light conveyor belts. Determination of electrical resistances
- ICS
- 53.040.10
- CCS
- 发布
- 2020-11-12
- 实施
- 2020-11-12
本标准规定了带式输送机（以下简称输送机）的型式和基本参数、技术要求、试验方法、检验规则、标志、包装和贮存。 本标准适用于输送散状物料及成件物品的输送机。 输送有毒有害、易燃、易爆、具有强腐蚀及放射性物料的输送机、有特殊要求和特殊型式的输送机，其通用部分亦可参照使用。
belt conveyor
- ICS
- 53.040.10
- CCS
- C343
- 发布
- 2020-09-28
- 实施
- 2020-09-28
Monorail trolley suspended conveyor
- ICS
- 53.040.10
- CCS
- J81
- 发布
- 2020-08-31
- 实施
- 2021-04-01
This document specifies test methods for determining the electrical resistances of light conveyor belts according to ISO 21183‑1. The resistances are surface resistance, volume resistance perpendicular to the belt plane, and longitudinal and transverse volume resistance parallel to the belt plane. This document also specifies two test methods for determining the surface resistivity and the volume resistivity.
Light conveyor belts - Determination of electrical resistances (ISO 21178:2020)
- ICS
- 53.040.10
- CCS
- 发布
- 2020-02-19
- 实施
- 2020-05-31
This document specifies test methods for determining the electrical resistances of light conveyor belts according to ISO 21183-1. The resistances are surface resistance, volume resistance perpendicular to the belt plane, and longitudinal and transverse volume resistance parallel to the belt plane. This document also specifies two test methods for determining the surface resistivity and the volume resistivity.
Light conveyor belts — Determination of electrical resistances
- ICS
- 53.040.10
- CCS
- 发布
- 2020-02-05
- 实施
Safety standards of the conveyer system
- ICS
- 53.040.10
- CCS
- 发布
- 20191029
- 实施
- 20191029
