53.040.10 输送机 标准查询与下载

CJ/T 390-2012 板式垃圾输送机

本标准规定了板式垃圾输送机的术语和定义、型式和结构、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于生活垃圾处理中承接由车辆、抓斗或装载机等倾卸垃圾，并连续均匀输送垃圾的磷板式输送机。

Plate waste conveyor

ANSI/ASME B20.1-2012 输送机及其相关设备的安全标准

Applies to the design, construction, installation, maintenance, inspection, and operation of conveyors and conveying systems in relation to hazards.

Safety Standard for Conveyors and Related Equipment

GOST EN 620-2012 连续搬运设备和系统. 散料用固定式皮带输送装置. 安全和EMC要求

Continuous handling equipment and systems. Fixed belt conveyers for bulk materials. Safety and EMC requirements

ASME B20.1-2012 输送装置及有关设备安全性标准

This Standard applies to the design, construction, installation, maintenance, inspection, and operation of conveyors and conveying systems in relation to hazards. The conveyors may be of the bulk material, package, or unit-handling types, where the installation is designed for permanent, temporary, or portable operation. This Standard shall apply, with the exceptions noted below, to all conveyor installations. This Standard specifically excludes any conveyor designed, installed, or used primarily for the movement of people. This Standard does, however, apply to certain conveying devices that incorporate within their supporting structure workstations or operator's stations specifically designed for authorized operating personnel. This Standard does not apply to conveyors such as underground mine conveyors for which specific standards are already in effect, or to equipment such as industrial trucks, tractors, trailers, automatic guided vehicles, tiering machines (except pallet load tierers), cranes, hoists, power shovels, power scoops, bucket drag lines, trenchers, platform elevators designed to carry passengers or an operator, manlifts, movingwalks, moving stairways (escalators), highway or railroad vehicles, cableways, tramways, dumbwaiters, material lifts, industrial scissors lifts, pneumatic conveyors, robots, or integral machine transfer devices. Some of the foregoing have specific standards. The provisions of this Standard shall apply to equipment installed 1 yr after the date of issuance.

Safety Standard for Conveyors and Related Equipment

JB/T 11231-2011 摩擦驱动悬挂输送机

本标准规定了摩擦驱动悬挂输送机（以下简称输送机）的型式、基本参数、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于接力式摩擦驱动的悬挂输送机。

Friction drive overhead conveyors

GSO EN 618:2011 连续搬运设备和系统 散装物料机械搬运设备的安全和电磁兼容性要求 固定输送机除外

1.1 This standard deals with the technical requirements to minimise the risks due to the hazards listed in clause 4, which can arise during operation and maintenance of mechanical handling equipment defined in clauses 3.1 to 3.3 and which are designed for continuously conveying bulk materials from the loading point(s) to the unloading point(s).In general, it also applies to equipment which are built into machines or attached to machines. This standard deals with the technical requirements for EMC. 1.2 The standard does not apply to: - continuous handling equipment and systems for open-cast lignite mining; - continuous handling equipment and systems for underground mining; - tunnel digging and excavating machines; - bulk material processing or classification machines such as grinders, crushers, screens; - fixed belt conveyors for bulk materials. These are covered by the standard EN 620:2002+A1:2010; - fixed pneumatic handling equipment. These equipment and systems are covered by the standard EN 741; - the interface between the machinery dealt with in this standard and the fixed belt or pneumatic conveyor. 1.3 This standard does not give the additional requirements for: a) use in public areas or for the transportation of people; b) floating, dredging and ship mounted equipment; c) conveyors requiring a high level of cleanliness for hygiene reasons, e.g. in direct contact with foodstuffs or pharmaceuticals; d) transportation of the equipment; e) hazards caused by vibration; f) use in ambient air temperature below - 20 °C and above + 40 °C; g) the effects of wind on strength and stability; h) hazards resulting from handling specific hazardous materials, (e.g. Explosives, radiating material); i) hazards resulting from contact with or inhalation of harmful fluids, gas, mists, fumes and dusts; j) biological and micro-biological (viral or bacterial) hazards; k) hazards due to heat radiation from the materials handled;

Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors

GSO EN 617:2011 连续装卸设备和系统 筒仓、仓库、料箱和料斗中散装物料存储设备的安全和电磁兼容性要求

This European Standard deals with the technical requirements to minimise the hazards listed in clause 4 and annex A. These hazards can arise during the operation and maintenance of equipment to store bulk materials in silos, bunkers, bins and hoppers and their built-in inlet and outlet devices when carried out in accordance with the specifications given by the manufacturer or his authorised representative. This standard deals with safety related technical verification during commissioning. The following parts are dealt with in this standard (see Figure 1): NOTE Silos are made of different materials e.g. concrete, steel, aluminium, spun rayon, wood. Safety requirements and/or measures in this standard apply to equipment used in all environments. However, additional risk assessment and safety measures need to be considered in severe conditions, e.g. low or high temperatures out of the range covered by EN 60204-1, corrosive environments, strong magnetic fields, radioactive conditions and bulk materials to be stored included their flow the nature of which could lead to a dangerous situation. This standard does not cover requirements for: - movable, non permanent storage equipment such as road vehicles, rail wagons, containers for bulk materials, ships and barges; - blow tanks and pressure vessels as used in pneumatic conveying systems; - stockpiles and flat storage; - storage equipment for non bulk materials (liquid, gas, slurries, sludge, silage); - dismantling and transport of storage equipments; - procedure for entering the silo and behaviour of persons inside the silo; - storage equipments for underground mining; - "noise." This European Standard deals with the technical requirements for electromagnetic compatibility (EMC).

Continuous handling equipment and systems - Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers

GSO EN 14658:2011 连续装卸设备和系统 露天褐煤开采中使用的连续装卸设备的一般安全要求

This European Standard applies to mechanical continuous handling equipment used in opencast lignite mines and the particular mechanical continuous handling equipment used: - to convey lignite or overburden from opencast mines; - to convey residuals and tailings from lignite processing to opencast mines; - to convey lignite, overburden or lignite treatment processing residuals and tailings from one opencast mine to another. This standard applies to continuous handling equipment operating in delimited site areas that are off-limits to the public and accessible only to authorized persons. It specifies the safety requirements for stationary, mobile and shiftable continuous handling equipment designed to transport bulk goods by continuous movement from a loading point to a discharge point. The standard considers the significant hazards that arise during the use, movement and shifting of continuous handling equipment, as well as the measures for eliminating or reducing these hazards provided the continuous handling equipment is used as intended and the remaining risk is foreseen and taken into account by the manufacturer. A complete list of all the hazards specified in EN 1050 is given in Annex A (normative). The requirements of this standard do not apply to equipment and systems manufactured and put into operation before the publication date of this standard. This standard does not cover: a) safety requirements of wireless remote control systems; b) hazards generated by noise; c) hazards generated by vibration; d) hazards generated by explosion; e) hazards generated by electromagnetic interference (EMC). NOTE Directive 94/9/EC concerning equipment and protective systems intended for use in potentially explosive atmospheres and Directive 89/336/EEC.relating to electromagnetic compatibility may be applicable to equipment or components covered by this European Standard.

Continuous handling equipment and systems - General safety requirements for continuous handling equipment for opencast lignite mining

GSO EN 619:2011 连续搬运设备和系统 单元负载机械搬运设备的安全和电磁兼容性要求

1.1 This European standard deals with the technical requirements to minimise the hazards listed in Clause 4 and Annex B. These hazards can arise during the operation and maintenance of continuous handling equipment and systems when carried out in accordance with the specifications given by the manufacturer or his authorised representative. This standard deals with safety related technical verification during commissioning. 1.2 This standard applies to mechanical handling devices defined in Clause 3, singly or combined to form a conveyor system, and designed exclusively for moving unit loads continuously on a predefined route from the loading to the unloading points, possibly with varying speed or cyclically. In general, it also applies to conveyors which are built into machines or attached to machines. 1.3 Safety requirements and/or measures in this standard apply to equipment used in all environments. However, additional risk assessments and safety measures need to be considered for uses in severe conditions, e.g. freezer applications, high temperatures, corrosive environments, strong magnetic fields, potentially explosive atmospheres, radioactive conditions and loads the nature of which could lead to a dangerous situation (e.g. molten metal, acids/bases, specially brittle loads, explosives) operation on ships and earthquake effects and also contact with foodstuff. Hazards during decommissioning are not covered. 1.4 This European Standard deals with the technical requirements for electromagnetic compatibility (EMC). 1.5 This standard does not cover hazards during decommissioning and hazards generated by noise. It also does not cover operation in environments where the electromagnetic disturbances are outside the range of those specified in EN 61000-6-2. This standard does not apply to conveying equipment and systems used underground or in public areas and to aircraft ground support equipment. (...)

Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads

DIN EN 620:2011 连续搬运设备和系统.散装物料搬运用固定皮带输送装置的安全性和电磁兼容性(EMC)要求.德文版本EN 620-2002+A1-2010

This European standard deals with the technical requirements to minimise the risks due to hazards listed in clause 4, which can arise during operation and maintenance of fixed belt conveyors and systems as defined in 3.1 to 3.2.4 and designed for continuously conveying loose bulk materials from the loading point(s) to the unloading point(s). Requirements for electromagnetic compatibility are also covered. This standard applies to use in ambient air temperatures of -15 °C to +40 °C.

Continuous handling equipment and systems - Safety and EMC requirements for fixed belt conveyors for bulk materials; German version EN 620:2002+A1:2010

DIN EN 617:2011 连续搬运设备和系统.筒仓,燃料,箱柜和储料器内散装材料的储存用设备的安全性和电磁兼容性(EMC)要求;德文版 EN 617-2001+A1-2010

Continuous handling equipment and systems - Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers; German version EN 617:2001+A1:2010

DIN EN 618:2011 连续搬运设备和系统.固定带式输送机除外的散装材料的机械搬运设备的安全性和电磁兼容性要求.德文版本EN 618-2002+A1-2010

Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors; German version EN 618:2002+A1:2010

DB13/T 1379-2011 带式输送机配件 滚筒

本标准规定了带式输送机配件滚筒的产品规格、要求、试验方法、检验规则、标志、包装、运输和贮存。本标准适用于带式输送机用滚筒，不适用于煤矿用带式输送机用滚筒。

Belt Conveyor Accessories Roller

LST EN 620-2002+A1-2011 连续搬运设备和系统 散装物料固定带式输送机的安全和 EMC 要求

Continuous handling equipment and systems - Safety and EMC requirements for fixed belt conveyors for bulk materials

LST EN 618-2002+A1-2011 连续搬运设备和系统 除固定带式输送机外的散装物料机械搬运设备的安全和 EMC 要求

Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors

LST EN 617-2001+A1-2011 连续搬运设备和系统 筒仓、料仓、料箱和料斗中散装物料储存设备的安全和 EMC 要求

Continuous handling equipment and systems - Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers

DS/EN 618+A1:2011 连续搬运设备和系统 除固定带式输送机外的散装物料机械搬运设备的安全和 EMC 要求

1.1 This standard deals with the technical requirements to minimise the risks due to the hazards listed in clause 4, which can arise during operation and maintenance of mechanical handling equipment defined in clauses 3.1 to 3.3 and which are designed for continuously conveying bulk materials from the loading point(s) to the unloading point(s).In general, it also applies to equipment which are built into machines or attached to machines. This standard deals with the technical requirements for EMC.1.2 The standard does not apply to:- continuous handling equipment and systems for open-cast lignite mining;- continuous handling equipment and systems for undergr

Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors

DS/EN 620+A1:2011 连续搬运设备和系统 散装物料固定带式输送机的安全和 EMC 要求

This European standard deals with the technical requirements to minimise the risks due to the hazards listed in clause 4, which can arise during operation and maintenance of fixed belt conveyors and systems as defined in 3.1 to 3.2.4 and designed for continuously conveying loose bulk materials from the loading point(s) to the unloading point(s). Requirements for electromagnetic compatibility are also covered.1.2 This standard applies to use in ambient air temperatures of -15 °C to + 40 °C.1.3 This standard does not cover:a) use in open cast lignite mining or use underground, such as in mines or tunnels;b) use in public areas or for man-riding;c) floating, d

Continuous handling equipment and systems - Safety and EMC requirements for fixed belt conveyors for bulk materials

NF H95-115:2011 连续搬运设备和系统.散装物料搬运用固定皮带输送装置的安全性和电磁兼容性(EMC)要求.

Continuous handling equipment and systems - Safety and EMC requirements for fixed belt conveyors for bulk materials.

NF H95-115/IN1:2011 连续搬运设备和系统.散装物料搬运用固定皮带输送装置的安全性和电磁兼容性(EMC)要求.

Continuous handling equipment and systems - Safety and EMC requirements for fixed belt conveyors for bulk materials.