53.040.10 输送机 标准查询与下载
共找到 392 条与 输送机 相关的标准，共 27 页
This European standard deals with the technical requirements to minimise the hazards listed in Clause 4 and Annex B. These hazards can arise during the operation and maintenance of continuous handling equipment and systems when carried out in accordance with the specifications given by the manufacturer or his authorised representative. This standard deals with safety related technical verification during commissioning. This standard applies to mechanical handling devices defined in Clause 3, singly or combined to form a conveyor system, and designed exclusively for moving unit loads continuously on a predefined route from the loading to the unloading points. In general, it also applies to conveyors which are built into machines or attached to machines.
Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads; German version EN 619:2002+A1:2010
- ICS
- 53.040.10
- CCS
- J81
- 发布
- 2011-02
- 实施
- 2011-02-01
Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads
- ICS
- 53.040.10
- CCS
- 发布
- 2011-01-31
- 实施
- 2011-01-31
Light conveyor belts -- Determination of the relaxed elastic modulus
- ICS
- 53.040.10
- CCS
- J81
- 发布
- 2010-12-20
- 实施
Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads.
- ICS
- 53.040.10
- CCS
- J81
- 发布
- 2010-12-01
- 实施
- 2010-12-24
Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads.
- ICS
- 53.040.10
- CCS
- J83
- 发布
- 2010-12-01
- 实施
This European Standard deals with the technical requirements to minimise the hazards listed in clause 4 and annex A. These hazards can arise during the operation and maintenance of equipment to store bulk materials in silos, bunkers, bins and hoppers and their built-in inlet and outlet devices when carried out in accordance with the specifications given by the manufacturer or his authorised representative. This standard deals with safety related technical verification during commissioning. NOTE Silos are made of different materials e. g. concrete, steel, aluminium, spun rayon, wood. Safety requirements and/or measures in this standard apply to equipment used in all environments. However, additional risk assessment and safety measures need to be considered in severe conditions, e. g. low or high temperatures out of the range covered by EN 60204-1, corrosive environments, strong magnetic fields, radioactive conditions and bulk materials to be stored included their flow the nature of which could lead to a dangerous situation. This standard does not cover requirements for: movable, non permanent storage equipment such as road vehicles, rail wagons, containers for bulk materials, ships and barges; blow tanks and pressure vessels as used in pneumatic conveying systems; stockpiles and flat storage; storage equipment for non bulk materials (liquid, gas, slurries, sludge, silage); dismantling and transport of storage equipments; procedure for entering the silo and behaviour of persons inside the silo; storage equipments for underground mining; noise. This European Standard deals with the technical requirements for electromagnetic compatibility (EMC).
Continuous handling equipment and systems - Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers
- ICS
- 53.040.10
- CCS
- J81
- 发布
- 2010-12
- 实施
This European standard deals with the technical requirements to minimise the risks due to the hazards listed in clause 4, which can arise during operation and maintenance of fixed belt conveyors and systems as defined in 3.1 to 3.2.4 and designed for continuously conveying loose bulk materials from the loading point(s) to the unloading point(s). Requirements for electromagnetic compatibility are also covered. This standard applies to use in ambient air temperatures of -15° C to + 40° C. This standard does not cover: a) use in open cast lignite mining or use underground, such as in mines or tunnels; b) use in public areas or for man-riding; c) floating, dredging and ship mounted equipment; d) conveyors requiring a high level of cleanliness for hygiene reasons, e. g. in direct contact with foodstuffs or pharmaceuticals; e) conveyors using a moving belt with other than a continuous rubber or polymeric surface for the conveying medium; f) transportation of the conveyor; g) the design of the supporting structure which is not part of a conveyor (see 3.2); h) the effects of wind; i) hazards resulting from handling specific hazardous materials, (e. g. explosives, radiating material); j) hazards resulting from contact with or inhalation of harmful fluids, gases, mists, fumes or dust; k) biological and micro-biological (viral or bacterial) hazards; l) hazards due to heat radiation from the materials handled; m) hazards caused by operation in electromagnetic fields outside the range of EN 61000-6-2:1999; n) hazards caused by operation subject to special regulations (e. g. explosive atmospheres); o) hazards caused by noise; p) hazards caused by the use of ionising radiation sources; q) hazards caused by hydraulic equipment. The safety requirements of this standard apply to equipment and systems placed on the market after the date of publication of this standard. NOTE Directive 94/9/EC concerning equipment and protective systems intended for use in potentially explosive atmospheres can be applicable to the type of machine or equipment covered by this European Standard. The present standard is not intended to provide means of complying with the essential health and safety requirements of Directive 94/9/EC.
Continuous handling equipment and systems - Safety and EMC requirements for fixed belt conveyors for bulk materials
- ICS
- 53.040.10
- CCS
- J81
- 发布
- 2010-12
- 实施
This standard deals with the technical requirements to minimise the risks due to the hazards listed in clause 4, which can arise during operation and maintenance of mechanical handling equipment defined in clauses 3.1 to 3.3 and which are designed for continuously conveying bulk materials from the loading point(s) to the unloading point(s).In general, it also applies to equipment which are built into machines or attached to machines. This standard deals with the technical requirements for EMC. The standard does not apply to: continuous handling equipment and systems for open-cast lignite mining; continuous handling equipment and systems for underground mining; tunnel digging and excavating machines; bulk material processing or classification machines such as grinders, crushers, screens; fixed belt conveyors for bulk materials. These are covered by the standard EN 620:2002+A1:2010; fixed pneumatic handling equipment. These equipment and systems are covered by the standard EN 741; the interface between the machinery dealt with in this standard and the fixed belt or pneumatic conveyor. This standard does not give the additional requirements for: a) use in public areas or for the transportation of people; b) floating, dredging and ship mounted equipment; c) conveyors requiring a high level of cleanliness for hygiene reasons, e. g. in direct contact with foodstuffs or pharmaceuticals; d) transportation of the equipment; e) hazards caused by vibration; f) use in ambient air temperature below - 20 °C and above + 40 °C; g) the effects of wind on strength and stability; h) hazards resulting from handling specific hazardous materials, (e. g. Explosives, radiating material); i) hazards resulting from contact with or inhalation of harmful fluids, gas, mists, fumes and dusts; j) biological and micro-biological (viral or bacterial) hazards; k) hazards due to heat radiation from the materials handled; l) hazards caused by operation in electromagnetic fields outside the range of EN 61000-6-2; m) hazards caused by operation subject to special regulations (e. g. explosive atmospheres); n) hazards caused by noise; o) hazards caused by the use of ionising radiation sources (e. g. measurement equipment); p) hazards caused by hydraulic equipment; q) hazards caused by inadequate controls cabins lighting; r) the risk related to elevating of the control stations; s) hazards related to contact with or inhalation of harmful fluids, gases, mists, fums and dusts. The safety requirements apply to equipment and systems placed on the market after the date of publication of this standard. NOTE 1 The requirements of this standard can be used for comparable machines outside the scope of this standard with the same risks. NOTE 2 Directive 94/9/EC concerning equipment and protective systems intended for use in potentially explosive atmospheres can be applicable to the type of machine or equipment covered by this European Standard. The present standard is not intended to provide means of complying with the essential health and safety requirements of Directive 94/9/EC.
Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors
- ICS
- 53.040.10
- CCS
- J81
- 发布
- 2010-12
- 实施
Belt conveyors for underground coalmining - Heavy construction
- ICS
- 53.040.10
- CCS
- D93
- 发布
- 2010-12
- 实施
This European standard deals with the technical requirements to minimise the hazards listed in Clause 4 and Annex B. These hazards can arise during the operation and maintenance of continuous handling equipment and systems when carried out in accordance with the specifications given by the manufacturer or his authorised representative. This standard deals with safety related technical verification during commissioning. This standard applies to mechanical handling devices defined in Clause 3, singly or combined to form a conveyor system, and designed exclusively for moving unit loads continuously on a predefined route from the loading to the unloading points, possibly with varying speed or cyclically. In general, it also applies to conveyors which are built into machines or attached to machines. Safety requirements and/or measures in this standard apply to equipment used in all environments. However, additional risk assessments and safety measures need to be considered for uses in severe conditions, e. g. freezer applications, high temperatures, corrosive environments, strong magnetic fields, potentially explosive atmospheres, radioactive conditions and loads the nature of which could lead to a dangerous situation (e. g. molten metal, acids/bases, specially brittle loads, explosives) operation on ships and earthquake effects and also contact with foodstuff. Hazards during decommissioning are not covered. This European Standard deals with the technical requirements for electromagnetic compatibility (EMC). This standard does not cover hazards during decommissioning and hazards generated by noise. It also does not cover operation in environments where the electromagnetic disturbances are outside the range of those specified in EN 61000-6-2. This standard does not apply to conveying equipment and systems used underground or in public areas and to aircraft ground support equipment. NOTE 1 Aircraft ground support equipment is covered by the standards of CEN/TC 247. NOTE 2 Conveying equipment and systems used in public areas will be covered in an amendment. NOTE 3 Hazards generated by noise will be dealt with in an amendment.
Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads
- ICS
- 53.040.10
- CCS
- J81
- 发布
- 2010-10
- 实施
Continuous handling equipment and systems - General safety requirements for continuous handling equipment for opencast lignite mining
- ICS
- 53.040.10
- CCS
- 发布
- 2010-06-30
- 实施
- 2010-06-30
Continuous handling equipment and systems - General safety requirements for continuous handling equipment for opencast lignite mining; German version EN 14658:2005+A1:2010
- ICS
- 53.040.10
- CCS
- D93
- 发布
- 2010-06
- 实施
- 2010-06-01
本标准规定了移动带式输送机的型式、基本参数、技术要求、试验方法、检验规则、标志、包装和运输。 本标准适用于短距离装卸散状物料或单件不超过100 kg成件物品的移动带式输送机(以下简称输送机)。 有特殊要求的输送机，其通用部分亦应参照本标准执行。
Mobile belt conveyor
- ICS
- 53.040.10
- CCS
- J81
- 发布
- 2010-02-11
- 实施
- 2010-07-01
This European Standard applies to mechanical continuous handling equipment used in opencast lignite mines and the particular mechanical continuous handling equipment used: to convey lignite or overburden from opencast mines; to convey residuals and tailings from lignite processing to opencast mines; to convey lignite, overburden or lignite treatment processing residuals and tailings from one opencast mine to another. This standard applies to continuous handling equipment operating in delimited site areas that are off-limits to the public and accessible only to authorized persons. It specifies the safety requirements for stationary, mobile and shiftable continuous handling equipment designed to transport bulk goods by continuous movement from a loading point to a discharge point. The standard considers the significant hazards that arise during the use, movement and shifting of continuous handling equipment, as well as the measures for eliminating or reducing these hazards provided the continuous handling equipment is used as intended and the remaining risk is foreseen and taken into account by the manufacturer. A complete list of all the hazards specified in EN 1050 is given in Annex A (normative). The requirements of this standard do not apply to equipment and systems manufactured and put into operation before the publication date of this standard. This standard does not cover: a) safety requirements of wireless remote control systems; b) hazards generated by noise; c) hazards generated by vibration; d) hazards generated by explosion; e) hazards generated by electromagnetic interference (EMC). NOTE Directive 94/9/EC concerning equipment and protective systems intended for use in potentially explosive atmospheres and Directive 89/336/EEC.relating to electromagnetic compatibility may be applicable to equipment or components covered by this European Standard. This Standard is not intended to provide means of complying with the essential health and safety requirements of the above Directives.
Continuous handling equipment and systems - General safety requirements for continuous handling equipment for opencast lignite mining
- ICS
- 53.040.10
- CCS
- J81
- 发布
- 2010-02
- 实施
The document applies to the design, construction, installation, maintenance, inspection, and operation of conveyors and conveying systems in relation to hazards. The conveyors may be of the bulk material, package, or unit handling types where the installation is designed for permanent, temporary, or portable operation. This Standard shall apply, with the exceptions noted below, to all conveyor installations. This Standard specifically excludes any conveyor designed for, installed for, or used primarily for the movement of human beings. This Standard does, however, apply to certain conveying devices that incorporate within their supporting structure work stations or operator's stations specifically designed for authorized operating personnel.
Safety Standard for Conveyors and Related Equipment
- ICS
- 53.040.10
- CCS
- J81
- 发布
- 2009-01-01
- 实施
Includes 33 recommended dimensional standards for major screw conveyor components. This revision adds a 34th standard that covers Shaftless Conveyor Screws. The standard is included with this notice.
Screw Conveyor Dimensional Standards
- ICS
- 53.040.10
- CCS
- J81
- 发布
- 2009
- 实施
Provides accepted engineering and application guidance for screw conveyor design. This change adds a section to chapter 6 that addresses the use of variable frequency drives. A copy of the change is included in this announcement.
Screw Conveyors
- ICS
- 53.040.10
- CCS
- J81
- 发布
- 2009
- 实施
The purpose of this guideline is to indicate the types, application ranges, features, and the resulting suitability for applications in order to give advice for an appropriate selection of drag chain conveyors in materials flow planning.
Continuous conveyors survey - Drag chain conveyors
- ICS
- 53.040.10
- CCS
- 发布
- 2008-04
- 实施
本标准规定了气垫带式输送机（以下简称气垫机）的型式、基本参数、技术要求、试验方法、检验规则、包装、运输和贮存。 本标准适用于固定式和移动式气垫机。
Air supported belt conveyor
- ICS
- 53.040.10
- CCS
- J81
- 发布
- 2008-03-12
- 实施
- 2008-09-01
本标准规定了螺旋输送机的基本参数，计算基本原则，技术要求，试验方法，检验规则，标志、包装和贮运。 本标准适用于水平和微倾斜（15°以下）连续均匀输送松散物料的螺旋输送机。其工作环境温度为-20℃～+40℃，输送物料温度为-20℃～+80℃。
Screw conveyor
- ICS
- 53.040.10
- CCS
- J81
- 发布
- 2008-03-12
- 实施
- 2008-09-01
