53.040.20 输送机零部件 标准查询与下载

DIN 22102-3:2020 用于散装货物的带纺织层的传送带. 第3部分: 固定接头

This document specifies requirements for joints which can be used to permanently join conveyor belts with textile plies according to DIN 22102-1 in hot or cold process.

Conveyor belts with textile plies for bulk goods - Part 3: Permanent joints

DIN 22102-1:2020 用于散装货物的带纺织层的传送带. 第1部分: 尺寸、规格、标志

This document specifies dimensions, requirements and marking of conveyor belts with one or more plies of woven textile fabric (referred to below as \

Conveyor belts with textile plies for bulk goods - Part 1: Dimensions, specifications, marking

KS M 6534-2020 输送带橡胶带

Conveyor rubber belts

T/CRIA 16006-2019 TBM波形挡边输送带

1.范围 2.规范性引用文件 3.结构与标记 4.技术要求、 5试验方法、 6检验、 7标志、包装、贮存和运输

TBM corrugated sidewall conveyor belt

T/CRIA 16007-2019 TBM织物芯输送带

1.范围 2.规范性引用文件 3.术语和定义 4.结构 5标记、 6技术要求、 7检验、 8标志、包装、贮存与运输。

TBM fabric core conveyor belt

T/CRIA 16008-2019 耐灼烧金属网芯输送带

1.范围 2.规范性引用文件 3.结构、 4标记、 5技术要求、 6试验方法、 7检验、 8标志、包装、贮存和运输。

Burn-resistant metal mesh conveyor belt

KS T ISO 4123-2019 带式输送机 承载托辊冲击环和返回托辊圆盘 主要尺寸

Belt conveyors－Impact rings for carrying idlers and discs forreturn idlers－Main dimensions

BS EN ISO 20238:2019 输送带 滚筒摩擦力测试

What is  ISO 20238 about?    ISO 20238 specifies a method of testing to determine the propensity of a conveyor belt to generate heat flame or glow when held stationary, under a given tension, in surface contact around a rotating driven steel drum. Note: For conveyor belts containing steel reinforcement, it may not be possible to conduct this test in full due to the inability of the conveyor belt to comply with the requirements. In this case, premature termination  can be necessary. Who is  ISO 20238  for?   ISO 20238 on   Conveyor belts is applicable to : conveyer belt manufacturers conveyer belt operators safety regulatory bodies servicemen and maintenance personnel Why should you use  ISO 20238? Conveyor belts are being used in many industries today. But one of the common risks associated with it is fire hazards caused by stalled conveyor belts. ISO 20238 provides a method of testing that will assist conveyor belt users in assessing the degree of risk which can be anticipated from the hazard caused when a conveyor belt stalls. By adopting ISO 20238 , manufacturers and users can prevent great hazards caused by the heating of conveyor belts.

Conveyor belts. Drum friction testing

T/ZZB 1011-2019 物流输送辊筒

本标准规定了物流输送辊筒的术语和定义、型式分类及基本参数、基本要求、技术要求、检验方法、检验规则、标志、包装、运输、贮存和质量承诺。 本标准适用于在室内工作的输送装备用物流输送辊筒。

Conveyor roller

ISO 21183-2:2018 轻型传送带第2部分:等效术语表

This document establishes a list of equivalent terms relating to light conveyor belts. NOTE In addition to terms used in the three official ISO languages (English, French and Russian), this document gives the equivalent terms in German, Spanish, Italian and Japanese; these are published under the responsibility of the member bodies for Germany (DIN), Spain (AENOR), Italy (UNI) and Japanese (JISC). However, only the terms given in the official languages can be considered as ISO terms.

Light conveyor belts — Part 2: List of equivalent terms

T/CRIA 16003-2018 隧道用轻型钢丝绳芯输送带

本标准规定了隧道用轻型钢丝绳芯输送带(以下简称带)的结构、带型、标记、技术要求、检验、标志、包装、贮存和运输。 本标准适用于隧道使用的轻型钢丝绳芯输送带。 包含规范性引用文件，结构，帯型，标记，技术要求，检验及标志，包装，储存和运输

Light steel cord conveyor belt for tunnel

JIS K 6378-6:2018 轻型输送带. 切割的轻型传输带的宽度和长度公差

Light conveyor belts -- Tolerances on widths and lengths of cut light conveyor belts

BS EN ISO 7590:2018 钢丝绳芯输送带 总厚度和覆盖层厚度的测定方法

Steel cord conveyor belts. Methods for the determination of total thickness and cover thickness

EN ISO 7590:2018 钢丝绳传输带.总厚度和覆层厚度的测定方法

Steel cord conveyor belts - Methods for the determination of total thickness and cover thickness

KS B ISO 1120:2018 输送带机械紧固件强度的测定静态试验方法

Conveyor belt — Determination of strength of mechanical fastenings — Static test method

KS B ISO 1120-2018 输送带机械紧固件强度的测定静态试验方法

Conveyor belt — Determination of strength of mechanical fastenings — Static test method

KS B ISO 703:2018 输送带 - 横向灵活性（易挥发性） - 测试方法

Conveyor belts — Transverse flexibility(troughability) — Test method

KS B ISO 703-2018 输送带 - 横向灵活性（易挥发性） - 测试方法

Conveyor belts — Transverse flexibility(troughability) — Test method

ASTM G143-03(2018) 测量卷筒纸/滚筒摩擦特性的标准试验方法

1.1 This test method covers the simulation of a roller/web transport tribosystem and the measurement of the static and kinetic coefficient of friction of the web/roller couple when sliding occurs between the two. The objective of this test method is to provide users with web/roller friction information that can be used for process control, design calculations, and for any other function where web/roller friction needs to be known. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Measurement of Web/Roller Friction Characteristics

ISO 7590:2018 钢丝绳输送带.总厚度及覆盖层厚度的测定方法

This document specifies three methods for the measurement of total belt thickness and the thickness of covers of steel cord conveyor belts. Methods A1 and A2 (micrometer methods) can be used for all steel cord conveyor belts for the measurement of both total belt thickness and cover thickness. Method B (optical method) is intended for the measurement of cover thickness only. It is not suitable if there is a textile or metal weft, nor if the ends of the steel cords become twisted when cut.

Steel cord conveyor belts - Methods for the determination of total thickness and cover thickness