53.040.30 气动运输及其零部件 标准查询与下载

KS T ISO 2327-2006(2016) 松散散装材料的气动处理设备 - 管道

Pneumatic handling appliances for loose bulk materials — Piping

KS T ISO 5031:2006 松散物料连续搬运设备.气力输送用接头和软管.安全规则

이 규격은 KS B ISO 1819에 규정한 일반 안전 규정에 추가 사항을 규정하며, 벌크

Continuous mechanical handling equipment for loose bulk materials－Couplings and hose components used in pneumatic handling－Safety code

KS T ISO 2327:2006 松散物料气力输送装置.输送管

이 규격은 경부하ㆍ중부하ㆍ고부하 시리즈에 대한 벌크성 물체의 공압 취급에 사용하는 배관

Pneumatic handling appliances for loose bulk materials－Piping

KS T ISO 5031-2006(2016) 用于松散散装材料的连续机械处理设备 - 用于气动处理的联轴器和软管部件 - 安全代码

Continuous mechanical handling equipment for loose bulk materials —Couplings and hose components used in pneumatic handling — Safety code

KS T ISO 2327-2006(2021) 散装材料用气动搬运设备.管道

Pneumatic handling appliances for loose bulk materials — Piping

KS T ISO 5031-2006(2021) 散装材料用连续机械搬运设备.气动搬运用联轴器和软管组件.安全规范

Continuous mechanical handling equipment for loose bulk materials —Couplings and hose components used in pneumatic handling — Safety code

KS T ISO 3284-2006(2021) 散装材料的连续机械搬运设备.气动搬运用弯管的尺寸

Continuous mechanical handling equipment for loose bulk materials —Dimensions of bends for use in pneumatic handling

BS EN 741:2000+A1:2010 连续处理设备和系统.散装材料气动处理用系统和元件的安全要求

1.1 This standard specifies the special safety requirements for those types of fixed pneumatic handling systems and components as defined in clause 3, which are designed for conveying bulk materials on a continuous or an intermittent basis (batch conveying system) from the loading point(s) to the unloading point(s). 1.2 This European standard deals with the technical requirements to minimise the hazards listed in clause 4 which can arise during the operation and the maintenance of the pneumatic conveying system. when carried out in accordance with the specifications given by the manufacturer or his authorised representative. Annex A gives a list of hazards according to EN ISO 12100-1. and the safety requirements and/or measures are specified in the same order as they are given in Annex A. 1.3 This standard applies to design, on site assembly, and commissioning stages. 1.4 This standard applies also to the built-in actuators and parts of the systems, which control the components. 1.5 Exclusions This standard does not specify the requirements for any elements used as a link between a fixed part(s) of the system and any other part mounted on mobile/movable supports (e.g.: ship, unloaders, ...). This standard does not take into account the risks of burns and scalds by the radiation of heat sources or by contact with hot gases. This standard does not take into account the risk generated by ionising materials used in measuring equipment (e.g. level indicators). This standard does not specify the requirements for handling specific hazardous materials, such as radiating material, explosives, explosive gases, ... This standard does not specify the requirements for hazards due to electrostatic charges of pipes and equipment made of non-metallic materials. The safety requirements for the transportation including loading and unloading of the components are not covered by this standard. This standard does not apply to pneumatic conveying systems used underground, for mining and in public areas. This European standard does not establish the additional requirements for: freezer applications, high temperatures, corrosive environments, strong magnetic fields, potentially explosive atmospheres, radioactive environment, operation on ships and earthquake effects, hazards during decommissioning. This standard does not specify the requirements for hazards due to noise.

Continuous handling equipment and systems. Safety requirements for systems and their components for pneumatic handling of bulk materials

EN 741:2000 连续装卸设备和系统.松散材料的气压装卸系统及其元部件的安全要求

This standard specifies the special safety requirements for those types of fixed pneumatic handling systems and components as defined in clause 3, which are designed for conveying bulk materials on a continuous or an intermittent basis (batch conveying system) from the loading point(s) to the unloading point(s).This European Standard deals with the technical requirements to minimise the hazards listed in clause 4 which can arise during the operation and the maintenance of the pneumatic conveying system. when carried out in accordance with the specifications given by the manufacturer or his authorised representative. Annex A gives a list of hazards according to EN ISO 12100-1. and the safety requirements and/or measures are specified in the same order as they are given in Annex A.This standard applies to design, on site assembly, and commissioning stages.This standard applies also to the built-in actuators and parts of the systems, which control the components. ExclusionsThis standard does not specify the requirements for any elements used as a link between a fixed part(s) of the system and any other part mounted on mobile/movable supports (e. g.: ship, unloaders, ...).This standard does not take into account the risks of burns and scalds by the radiation of heat sources or by contact with hot gases.This standard does not take into account the risk generated by ionising materials used in measuring equipment (e. g. level indicators).This standard does not specify the requirements for handling specific hazardous materials, such as radiating material, explosives, explosive gases, ...This standard does not specify the requirements for hazards due to electrostatic charges of pipes and equipment made of non-metallic materials. The safety requirements for the transportation including loading and unloading of the components are not covered byThis standard.This standard does not apply to pneumatic conveying systems used underground, for mining and in public areas.This European Standard does not establish the additional requirements for: freezer applications, high temperatures, corrosive environments, strong magnetic fields, potentially explosive atmospheres, radioactive environment, operation on ships and earthquake effects, hazards during decommissioning.This standard does not specify the requirements for hazards due to noise.

Continuous handling equipment and systems - Safety requirements for systems and their components for pneumatic handling of bulk materials (Incorporates Amendment A1: 2010)

JB/T 8111-1999 囊型气垫盘.基本参数

本标准适用于囊型气垫盘；囊型气垫盘亦可做水垫应用。

Bladder type air pad.Basic parameters

DIN 6663:1999 气动管系统.塑料(PVC),钢铁,和不锈钢气动管系统部件的制造工艺

Pneumatic tube systems - Workmanship of components for pneumatic tube systems in plastics (PVC-U), ferrous steel and stainless steel

DIN 6665:1998 气动管传送系统.传送管和传送管弯头的检验量规

The document specifies gauges for testing of inside diameter of conveyor tubes and bends 90?made from steel according to DIN 6656 and for tubes and bends 90?made from PVC-U according to DIN 6660.

Pneumatic tube conveyor systems - Gauges for conveyor tubes and conveyor tube bends

DIN 6651:1998 气动管系统.操作系统

The document specifies the operating systems of pneumatic tube post systems and the nominal diameters of conveyor tubes.

Pneumatic tube systems - Operating systems

DIN 6656:1997 风动管道系统.风动管道系统钢和不锈钢传送管、传送管弯头和套管

This document specifies dimensions, tolerances, materials and technical conditions of delivery for conveyor tubes, conveyor tube bends and sleeves in steel and stainless steel for pneumatic tube conveyor systems.#,,#

Pneumatic tube system - Conveyor tubes, conveyor tube bends and sleeves for pneumatic tubes lines in steel and stainless steel

DIN 6660:1996 风动管道系统.无增塑剂聚氯乙烯(硬聚氯乙烯)传送管,传送管弯头和接头

This document specifies dimensions for tubes, ends and sleeves for pneumatic tube conveyor systems.#,,#

Pneumatic tube systems - Conveyor tube, conveyor tube bend and sleeves for pneumatic tube lines of unplasticized polyvinylchloride (PVC-U)

SR ISO 5051:1996 连续的机械搬运设备．带平的后围的深提升斗．主要尺寸

Prezentul Standard Interna?ional stabile?te dimensiunile principale ale cupelor ad?nci cu perete spate drept pentru elevatoare.

Continuous mechanical handling equipment - Deep elevator bucket with flat rear wall - Main dimensions

STAS SR ISO 3265:1995 大型松散材料的连续机械装卸设备．铁路自动下货车轨道．铁路货车（可旋转，侧面卸货和末端卸货）．安全守则

Prezentul Standard International stabile?te, ?n completarea regulilor generale de securitate cuprinse ?n ISO/R 1819, regulile de securitate specifice culbutoarelor de vagoane (rotative sau cu desc?rcare lateral? sau longitudinal?).

Continuous mechanical nandling equipment for loose bulk materials - Wagon tipplers handling rail - borne wagons (rotary, side discharge and end discharge ) - Safety code

STAS SR ISO 7190:1995 连续机械装卸设备．斗式提升机．分类

Prezentul Standard Interna?ional stabile?te clasificarea elevatoarelor cu cupe, indicate la 2.14.16 ?i 2.14.17 din ISO 2148, dup? caracteristicile lor principale.

Continuous mechanical handling equipment-Bucket elevators-Classification

SR ISO 5033:1995 松散物料连续搬运设备．旋转鼓式给料机和旋转叶轮给料机．安全守则

Prezentul Standard Interna?ional stabile?te, ?n completarea regulilor generale de securitate prezentate ?n ISO 1819, regulile de securitate specifice urm?toarelor mijloace de transport continuu pentru produse ?n vrac : alimentatoare cu tambur cilindric ?i

Continuous mechanical handling equipment for loose bulk materials - Rotary drum feeders and rotary vane feeders - Safety code

SR ISO 5034:1995 松散物料连续搬运设备．手动机械铲．安全守则

Prezentul Standard International stabile?te, ?n completarea regulilor generale de securitate din ISO 1819. regulile de securitate specifice lope?ilor semiautomate.1)

Continuous mechanical handling equipment for loose bulk materials - Hand - operated power shovels - Safety code