55.180.40 满装和整装运输包 标准查询与下载

ISO 18616-2:2016 运输包装. 可重复使用硬塑料配送箱. 第2部分: 通用试验规范

This document specifies the test methods for handling and managing reusable, rigid plastic distribution boxes. These boxes are based on the modular area 600 mm × 400 mm, 600 mm × 500 mm, 550 mm × 366 mm and subdivisions of them. This document is designed for general purpose applications in a returnable transport system. For automotive industry application, ISO 19709-1, ISO/TS 19709-2 and ISO/TS 19709-3 canbere ferenced.

Transport packaging - Reusable, rigid plastic distribution boxes - Part 2: General specifications for testing

ASTM E921-97(2016) 出口包装实验室仪器的标准规范

1.1 This specification covers the procedures for testing loaded shipping containers. Drop, vibration and compression tests are performed to measure the ability of the shipping container to protect the product from shock, vibration and compressive forces encountered during normal export handling and shipping conditions. This specification is not intended to supplant material specifications or existing preshipment test procedures. This specification is not intended for use with hazardous materials. 1.2 These procedures are suitable for all types of laboratory apparatus, including reusable and disposable macro and micro products. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 The following precautionary caveat pertains only to the test method portion, Section 4, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Export Packaged Laboratory Apparatus

BS EN ISO 13355:2016 包装 完整、装满的运输包装和单位负载 垂直随机振动试验

Packaging. Complete, filled transport packages and unit loads. Vertical random vibration test

EN ISO 13355:2016 包装完整,满装的运输包装-垂直随机振动试验(ISO 13355:2016)

Diese Internationale Norm legt ein Verfahren für die vertikale Schwingprüfung an (einem) versandfertigen Packstück(en) und Ladeeinheiten fest, unter Verwendung rauschförmiger Anregung. Des Weiteren stellt dieses Dokument Verfahren zur Überprüfung der Festigkeit eines Packstückes und seines Schutzvermögens unter vertikaler Schwinganregung auf. Die in diesem Dokument erläuterte Prüfung kann entweder als Einzelprüfung durchgeführt werden, um die Auswirkung vertikaler Schwingbelastung zu untersuchen, oder als Teil eines Prüfprogramms zur Ermittlung der Widerstandsfähigkeit einer Verpackung im Rahmen eines bestimmten Verteilungssystems (Transportkette), das eine Gefährdung durch Schwingung einschließt. ANMERKUNG In dieser Internationalen Norm wird ein Packstück oder eine Ladeeinheit als Prüfling bezeichnet.

Packaging - Complete@ filled transport packages and unit loads - Vertical random vibration test

ISO 13355:2016 包装.满装的运输包装和单元货物.随机垂直振动试验

This International Standard specifies a method to carry out a vertical random vibration test on a complete, filled transport package(s) and unit loads using random excitation1). This document also provides methods for assessing the performance of a package in terms of its strength or the protection that it offers to its contents when it is subjected to vertical vibration. The test discussed in this document can be performed either as a single test to investigate the effects of vertical vibration, or as a part of a sequence of tests designed to measure the ability of a test specimen to withstand a distribution system that includes a vibration hazard. NOTE In this International Standard, a package or unit load is referred to as test specimen.

Packaging - Complete, filled transport packages and unit loads - Vertical random vibration test

ASTM D7386-16 用于单包裹投递系统的包装的性能试验的标准实施规程

4.1 This practice provides a guide for the evaluation of shipping units in accordance with a uniform system, using established test methods at levels representative of those occurring in actual distribution. The recommended test levels are based on available information on the shipping and handling environment, and current industry/government practice and experience. The tests should be performed sequentially on the same containers in the order given. For use as a performance test, this practice requires that the shipping unit tested remain unopened until the sequence of tests are completed. If used for other purposes, such as package development, it may be useful to open and inspect shipping units at various times throughout the sequence. This may, however, prohibit evaluating the influence of the container closure on container performance. 1.1 This practice provides a uniform basis of evaluating, in a laboratory, the ability of shipping units, weighing up to but not exceeding 150 lb (68 kg), intended for the single parcel delivery system to withstand the hazards associated with the distribution environment. This is accomplished by subjecting them to a test plan consisting of a sequence of anticipated hazard elements encountered in the distribution cycles. This practice is not intended to supplant material specifications or existing pre-shipment test procedures. 1.2 The suitability of this practice for use with hazardous materials has not been determined. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific precautionary statements are given in 1.1.

Standard Practice for Performance Testing of Packages for Single Parcel Delivery Systems

KS T ISO 10531:2015 包装.满装的运输包装.单元货物稳定性试验

Packaging — Complete, filled transport packages — Stability testing of unit loads

GSO ISO 4180:2015 包装 完全填充的运输包装 性能测试表的编制和分类的一般规则

This International Standard establishes general rules to be used for the compilation of performance test schedules for complete, filled transport packages intended for use within any distribution system except for the packages used for dangerous goods. For a known distribution environment with experimental data available (case 1), this International Standard provides guide lines for the compilation of appropriate test schedules. For an unknown distribution environment (case 2), this International Standard provides test schedules in dependence of the test specimen mass and forecast destination. This International Standard also gives the factors to be considered in assessing the criteria of acceptance of such packages after they have been subjected to a package performance test schedule.

Packaging -- Complete, filled transport packages -- General rules for the compilation of performance test schedules

KS T 1310-2015 包装和集装箱倾斜冲击试验方法

Method of incline impact test for packages and shipping containers

KS T ISO 2873:2015 包装.满装的运输包装和单元货物.低压试验

Packaging — Complete, filled transport packages and unit loads — Low pressure test

KS T ISO 11897:2015 包装.热塑柔性薄膜袋.折边处的撕裂扩展试验

Packaging — Sacks made from thermoplastic flexible film — Tear propagation on edge folds

KS T ISO 13355:2015 包装.满装的运输包装和单元货物.随机垂直振动试验

Packaging — Complete, filled transport packages and unit loads — Vertical random vibration test

KS T ISO 2876-2015(2020) 包装 - 完整 填充运输包装 - 滚动试验

Packaging — Complete, filled transport packages — Rolling test

KS T ISO 2876:2015 包装.满装的运输包装.滚动试验

Packaging — Complete, filled transport packages — Rolling test

GSO ISO 12048:2014 包装 完全包装好的运输包装 使用压缩测试仪进行堆码和压缩测试

This International Standard specifies a method for testing the resistance to compression of complete, filled transport packages and a method for carrying out a stacking test on complete, filled transport packages using the same apparatus. The test may be used to assess the performance of a package in terms of its strength or the protection it offers to its contents when it is subjected to compressive forces. A test may be performed either as a single test to investigate the effects (deformation, collapse or failure) of compression or stacking, or as part of a sequence of tests designed to measure the ability of a package to withstand a distribution system that includes a compression or stacking hazard. This test may also be used as a stacking test to investigate performance under particular conditions of loading, as, for example, when the bottom package in a stack rests on an open-decked pallet.

Packaging -- Complete, filled transport packages -- Compression and stacking tests using a compression tester

GOST ISO 2234-2014 包装. 完全填充运输包装和单位负荷. 采用静态负载的堆码试验方法

Packaging. Complete filled transport packages and unit loads. Metods of stacking tests using a static load

KS T ISO 2244:2013 包装.满装的运输包装和单元货物.水平冲击试验

이 표준은 수송 포장 화물 또는 단위 화물에 대한 수평 충격 시험(수평 또는 경사면 시험 및 진자시험 포함) 방법을 규정한다. 이 시험은 수평 충격이 포장 및 단위 화물에 주는 영향을 조사하기 위한 단일 시험으로 수행되거나 수평 충격 위험 요인을 포함하는 유통 조건하에서의 포장 및 단위 화물의 저항 성능을 측정하기 위한 일련의 시험 중 일부로 수행될 수 있다.

Packaged freights ― Method of horizontal impact tests

KS T ISO 4180:2013 包装.运输包装货物.性能试验计划的一般原则

이 표준은 위험물용 포장을 제외한 모든 유통 시스템에 사용되는 수송 포장 화물의 성능 시험 계획을 수립하는 데 필요한 일반 원칙을 규정한다.이용 가능한 실험 데이터가 유통 환경에 이미 알려져 있는 경우(케이스 1), 이 표준은 적합한 시험계획 수립을 위한 가이드라인을 제공한다.유통 환경에 대해 모르는 경우(케이스 2), 이 표준은 시험품 중량과 예상 목적지에 근거하여 시험 계획을 제공한다.이 표준은 포장 성능 시험 계획에 따른 시험 후 포장의 허용 기준을 평가하는데 고려해야 할 요인도제시한다.

Packaging — Complete, filled transport packages — General rules for the compilation of performance test schedules

KS T ISO 4180-2-2013 完整、填充的运输包装 性能测试计划编制的一般规则 第2部分：定量数据

Complete, filled transport packages－General rules for the compilation of performance test schedules－Part 2：Quantitative data

KS T ISO 4180-1-2013 完整、填充的运输包装 性能测试表编制的一般规则 第1部分：一般原则

Complete, filled transport packages－General rules for the compilation of performance test schedules－Part 1：General principles