59.080.40 涂覆织物 标准查询与下载
共找到 885 条与 涂覆织物 相关的标准，共 59 页
This part of ISO 2286 describes methods of determining the length, width and net mass of a roll of rubber- or plastics-coated fabric.
Rubber- or plastics-coated fabrics -- Determination of roll characteristics -- Part 1: Methods for determination of length, width and net mass
- ICS
- 59.080.40
- CCS
- 发布
- 2015-09-03
- 实施
This International Standard specifies a method for the determination of rubber-to-fabric adhesion under direct tension. It is only suitable when the material to be tested is substantially uniform in thickness and flat or sufficiently flexible to be maintained flat under light pressure. It is particularly suitable for materials having a very thin rubber layer which are difficult to test by stripping or peeling methods. However it should be noted that the results obtained by this method will not necessarily correlate with those obtained by a stripping test such as that described in ISO/R 36, Determination of the adhesion strength of vulcanized rubbers to textile fabrics.
Rubber-coated fabrics -- Determination of rubber-to-fabric adhesion -- Direct tension method
- ICS
- 59.080.40
- CCS
- 发布
- 2015-09-03
- 实施
This part of ISO 5470 describes a method of assessing the abrasive wear resistance of coated fabrics using the Taber abrader.
Rubber- or plastics-coated fabrics -- Determination of abrasion resistance -- Part 1: Taber abrader
- ICS
- 59.080.40
- CCS
- 发布
- 2015-09-03
- 实施
Rubber- or plastics-coated fabrics - Measurement of gas permeability
- ICS
- 59.080.40
- CCS
- W59
- 发布
- 2015-09
- 实施
Rubber- or plastics-coated fabrics. Measurement of gas permeability
- ICS
- 59.080.40
- CCS
- W59
- 发布
- 2015-08-31
- 实施
- 2015-08-31
本标准规定了人造革合成革实验室光源暴露试验的3种方法：氙弧灯法(A法)、荧光紫外灯法(B法)和开放式碳弧灯法(C法)及其结果和评价。本标准适用于应用实验室光源对人造革合成革进行加速老化的试验及评价。
Test methods of artificial leather and synthetic leather.Exposure to laboratory light sources
- ICS
- 59.080.40
- CCS
- Y47
- 发布
- 2015-07-14
- 实施
- 2016-01-01
本标准规定了人造革合成革接缝强度测定的术语和定义、试验设备、试样、试验方法、结果计算和表示及试验报告。本标准适用于人造革合成革接缝强度的测定。
Test method of artificial leather and synthetic leather.Test method of seam strength
- ICS
- 59.080.40
- CCS
- Y47
- 发布
- 2015-07-14
- 实施
- 2016-01-01
本标准规定了运动手套用聚氨酯超细纤维合成革的产品分类、要求、试验方法、检验规则及标志、包装、运输、贮存。本标准适用于以双组分或多组分超细纤维制成的以非织造布为布基，经聚氨酯树脂浸渍及后整理工艺制成的运动手套用合成革。
Polyurethane micro-fibre synthetic leather for sports gloves
- ICS
- 59.080.40
- CCS
- Y47
- 发布
- 2015-07-14
- 实施
- 2016-01-01
Artificial Leather Test Methods for Synthetic Leather Determination of Fatigue Strength of Seams
- ICS
- 59.080.40
- CCS
- Y47
- 发布
- 2015-07-14
- 实施
- 2016-01-01
1.1 These test methods cover the testing of coated and laminated fabrics made primarily for use in fabric roof systems. These coated and laminated fabrics are generally in either an air supported or tension supported construction of fabric roof systems. 1.2 These methods can be used for most fiber-based, coated and laminated architectural fabrics. 1.3 This standard includes the following sections that provide test procedures for coated and laminated architectural fabrics: Section Fabric Count 8 Mass per Unit Area 9 Fabric Thickness 10 Fabric Width 11 Fabric Length 12 Fabric Bow 13 Adhesion of Coating to Fabric 14 Uniaxial Elongation Under Static Load 15 Fabric Breaking Force 16 Breaking Strength After Crease Fold 17 Elongation at Break 18 Fabric Trapezoid Tear Force 19 Resistance to Accelerated Weathering 20 Solar Optical Properties 21 Fabric Flame Resistance 22 Noise Reduction Coefficient 23 1.4 These test methods include only testing procedures and do not include specifications or tolerances. They are intended as a guide for specifications. Any of these methods may be used in material specifications to evaluate requirements for a specific end use as related to a particular job. 1.5 The values stated in either SI or inch-pound units are to regarded separately as the standard. Within the text, the inch-pound units are shown in parentheses. The values stated in each system are not exact equivalents; therefore, each system shall be used independently of the other. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Specific warning statements are given in 14.1, A1.3.3.1, A2.3.3.1, and A3.3.3.1. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Test Methods for Coated and Laminated Fabrics for Architectural Use
- ICS
- 59.080.40
- CCS
- 发布
- 2015-07-01
- 实施
BS ISO 1420. Rubber- or plastics-coated fabrics. Determination of resistance to penetration by water
- ICS
- 59.080.40
- CCS
- 发布
- 2015-05-14
- 实施
- 2015-05-14
Rubber or plastics-coated fabrics - Determination of stitch tear resistance (using a needle) - Test method; German version EN 16653:2015
- ICS
- 59.080.40
- CCS
- 发布
- 2015-05
- 实施
Rubber or plastics-coated fabrics. Determination of stitch tear resistance (using a needle). Test method
- ICS
- 59.080.40
- CCS
- W59
- 发布
- 2015-03-31
- 实施
- 2015-03-31
Testing methods for rubber- or plastics-coated fabrics -- Part 1: Basic characteristics (Standard atmospheres for conditioning and testing, and determination of roll characteristics)
- ICS
- 59.080.40
- CCS
- W59
- 发布
- 2015-03-20
- 实施
Testing methods for rubber- or plastics-coated fabrics -- Part 3: Determination of physical properties (Application)
- ICS
- 59.080.40
- CCS
- W59
- 发布
- 2015-03-20
- 实施
Testing methods for rubber- or plastics-coated fabrics -- Part 2: Determination of basic physical properties
- ICS
- 59.080.40
- CCS
- W59
- 发布
- 2015-03-20
- 实施
Testing methods for rubber- or plastics-coated fabrics -- Part 4: Endurance tests
- ICS
- 59.080.40
- CCS
- W59
- 发布
- 2015-03-20
- 实施
This European Standard specifies a method for the determination of the resistance of the seams of rubber or plastic-coated fabrics against tearing out a needle perpendicular to the stitching direction. This resistance is characterized by determining the stitch tear force.
Rubber or plastics-coated fabrics - Determination of stitch tear resistance (using a needle) - Test method
- ICS
- 59.080.40
- CCS
- W04
- 发布
- 2015-03
- 实施
5.1 Abrasion resistance tests are intended to measure the wear resistance properties of a material. This may be correlated to expected end use performance. 5.2 The resistance of coated fabrics to abrasion, as measured on a testing machine in the laboratory, is generally only one of several factors contributing to wear performance or durability as experienced in the actual use of the material. While abrasion resistance (often stated in terms of the number of abrasion cycles) and durability are frequently related, the relationship varies with different end uses and different factors may be necessary in any calculation of predicted durability from specific abrasion data. This test method provides a comparative ranking of material performance, which can be used as an indication of relative end-use performance. 5.3 The resistance of coated fabrics to abrasion may be affected by factors including test conditions, type of abradant, pressure between the specimen and abradant, mounting or tension of the specimen, and type, kind, or amount of finishing materials. 5.4 The measurement of the relative amount of abrasion may also be affected by the method of evaluation and may be influenced by the judgment of the operator. 1.1 This test method covers the determination of the wear resistance of fabrics coated with rubber or plastics to abrasion. The abrasion is measured by mass loss or number of cycles required to wear through the coating to initially expose the base fabric. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform Abrader)
- ICS
- 59.080.40
- CCS
- 发布
- 2015
- 实施
Rubber- or plastics-coated fabrics. Determination of bursting strength. Part 1. Steel-ball method
- ICS
- 59.080.40
- CCS
- W55
- 发布
- 2015
- 实施
- 2016-06-01
