59.080.40 涂覆织物 标准查询与下载
共找到 885 条与 涂覆织物 相关的标准，共 59 页
5.1 Abrasion resistance tests are intended to measure the wear resistance properties of a material. This may be correlated to expected end use performance. 5.2 The resistance of coated fabrics to abrasion, as measured on a testing machine in the laboratory, is generally only one of several factors contributing to wear performance or durability as experienced in the actual use of the material. While abrasion resistance (often stated in terms of the number of abrasion cycles) and durability are frequently related, the relationship varies with different end uses and different factors may be necessary in any calculation of predicted durability from specific abrasion data. This test method provides a comparative ranking of material performance, which can be used as an indication of relative end-use performance. 5.3 The resistance of coated fabrics to abrasion may be affected by factors including test conditions, type of abradant, pressure between the specimen and abradant, mounting or tension of the specimen, and type, kind, or amount of finishing materials. 5.4 The measurement of the relative amount of abrasion may also be affected by the method of evaluation and may be influenced by the judgment of the operator. 1.1 This test method covers the determination of the wear resistance of fabrics coated with rubber or plastics to abrasion. The abrasion is measured by mass loss or number of cycles required to wear through the coating to initially expose the base fabric. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform Abrader)
- ICS
- 59.080.40
- CCS
- 发布
- 2015
- 实施
This International Standard specifies a method for determining the crush resistance of fabrics coated with rubber or plastics. The method is applicable particularly to diaphragm material cut from coated fabrics.
Rubber- or plastics-coated fabrics -- Determination of crush resistance
- ICS
- 59.080.40
- CCS
- 发布
- 2014-12-25
- 实施
This part of ISO 7617 specifies technical requirements for coated fabrics for upholstered furniture for interior use, obtained by applying to one side of a weft-knitted base cloth a substantially continuous coating of a suitably plasticized polymer of vinyl chloride, or a copolymer the major constituent of which is vinyl chloride. Such coatings are known as poly(vinyl chloride) (PVC) coatings. The present specification covers fabrics coated with solid PVC and also covers two grades with coatings consisting of a layer of expanded PVC.
Plastics-coated fabrics for upholstery -- Part 1: Specification for PVC-coated knitted fabrics
- ICS
- 59.080.40
- CCS
- 发布
- 2014-12-25
- 实施
This International Standard describes three methods of assessing the resistance of coated fabrics to damage by repeated flexing.
Rubber- or plastics-coated fabrics -- Determination of resistance to damage by flexing
- ICS
- 59.080.40
- CCS
- 发布
- 2014-12-25
- 实施
This part of ISO 4674 describes two methods for determining the forces necessary to initiate and propagate tearing of a coated fabric using the constant rate of tear method. The methods described are: — method A: tongue tear; — method B: trouser tear.
Rubber- or plastics-coated fabrics -- Determination of tear resistance -- Part 1: Constant rate of tear methods
- ICS
- 59.080.40
- CCS
- 发布
- 2014-12-25
- 实施
This part of this ISO 4674 describes a method for the determination of tear resistance based on the action of an active force applied to a notched test piece. The test may be carried out on: — test pieces that have been conditioned in a standard atmosphere, or — test pieces that have undergone pre-treatment, e.g. water immersion. The results obtained by this method are not to be compared with those obtained by methods involving constant rate of tear.
Rubber- or plastics-coated fabrics -- Determination of tear resistance -- Part 2: Ballistic pendulum method
- ICS
- 59.080.40
- CCS
- 发布
- 2014-12-25
- 实施
本标准规定了对涂层织物进行氙弧法曝晒老化及比较老化前后性能变化的试验方法。本标准适用于各类涂层织物。
Coated fabrics.Light accelerated ageing tests.Xenon-arc method
- ICS
- 59.080.40
- CCS
- W04
- 发布
- 2014-12-24
- 实施
- 2015-06-01
本标准规定了用定伸长或定负荷方式测定涂层织物拉伸伸长、拉伸延迟变形和拉伸永久变形的试验方法。本标准适用于各种涂层织物。
Coated fabrics.Determination of elongation and tensile permanent deformation
- ICS
- 59.080.40
- CCS
- W04
- 发布
- 2014-10-14
- 实施
- 2015-04-01
Rubber- or plastics-coated fabrics — Determination of bursting strength — Part 2: Hydraulic method
- ICS
- 59.080.40
- CCS
- 发布
- 2014-09-02
- 实施
Rubber- or plastics- coated fabrics — Determination of bursting strength — Part 1: Steel-ball method
- ICS
- 59.080.40
- CCS
- 发布
- 2014-09-02
- 实施
이 표준은 기계적으로 조작하는 강구를 사용해 고무 또는 플라스틱 피복 직물의 파열 강도를 측정하는 방법에 대하여 규정한다.
Rubber- or plastics- coated fabrics — Determination of bursting strength — Part 1: Steel-ball method
- ICS
- 59.080.40
- CCS
- 发布
- 2014-09-02
- 实施
- 2014-09-02
이 표준은 유압으로 작동되는 유형 A와 B의 다이어프램 파열 강도 시험기 중 하나를 사용해 고무 또는 플라스틱 피복 직물의 파열 강도를 측정하는 방법에 대하여 규정한다. A형 시험기는 파열 강도가 350 kPa∼5 500 kPa인 재료에 적용하고, B형 시험기는 파열 강도가 70 kPa∼1 400 kPa인 재료에 적용할 수 있다.?
Rubber- or plastics-coated fabrics — Determination of bursting strength — Part 2: Hydraulic method
- ICS
- 59.080.40
- CCS
- 发布
- 2014-09-02
- 实施
- 2014/9/2
本标准规定了家居用聚氨酯合成革的分类、要求、试验方法、检验规则、标志、包装、运输和贮存。本标准适用于以非织造布基、机织布基或针织布基为底基,以聚氨酯树脂为主要原料,经干法或干湿法等涂层工艺及后段加工制造的,用于室内内墙装饰、窗帘和家具表面等装饰用革。本标准不适用于沙发用革。
Polyurethane synthetic leather for upholstery
- ICS
- 59.080.40
- CCS
- Y47
- 发布
- 2014-07-09
- 实施
- 2014-11-01
本标准规定了测定人造革合成革耐黄变程度的试验方法。本标准适用于白色或浅色聚氨酯人造革、聚氨酯合成革耐黄变程度的测试。
Test method for synthetic leather/artificial leather.Resistance to yellowing
- ICS
- 59.080.40
- CCS
- Y47
- 发布
- 2014-07-09
- 实施
- 2014-11-01
本标准规定了摩托车(包括电动摩托车)鞍座用聚氯乙烯人造革(以下简称“人造革”)的分类、要求、试验方法、检验规则及标志、包装、运输、贮存。本标准适用于以聚氯乙烯树脂为主要原料,加入增塑剂和其他添加剂,以针织布为底基,经压延或涂覆、转移等工艺方法制成的用于摩托车(包括电动摩托车)鞍座的人造革。本标准也适用于自行车和电动自行车鞍座用人造革。
Polyvinyl chloride artificial leather for motorcycle seat
- ICS
- 59.080.40
- CCS
- Y47
- 发布
- 2014-07-09
- 实施
- 2014-11-01
本标准规定了沙发用聚氨酯合成革的分类、要求、试验方法、检验规则及标志、包装、运输、贮存。本标准适用于以机织布基、针织布基或非织造布基为底基,以聚氨酯树脂为主要原料,经干、湿法等加工工艺制造的沙发用聚氨酯合成革。
Polyurethane synthetic leather for sofa
- ICS
- 59.080.40
- CCS
- Y47
- 发布
- 2014-07-09
- 实施
- 2014-11-01
本标准规定了测定人造革合成革耐水解性能试验方法的恒温恒湿耐水解法(A法)、常温碱液加速法(B法)和高温碱液加速法(C法)。本标准适用于聚氨酯人造革、聚氨酯合成革耐水解性的测试。
Test method for synthetic leather/artificial leather.Resistance to hydrolysis
- ICS
- 59.080.40
- CCS
- Y47
- 发布
- 2014-07-09
- 实施
- 2014-11-01
本标准规定了汽车内饰用聚氨酯束状超细纤维合成革的分类、要求、试验方法、检验规则及标志、包装、运输、贮存。本标准适用于以海岛型双组分或多组分纤维加工成非织造布再经聚氨酯树脂浸渍、湿法凝固、溶剂萃取及后整理等工艺制成的汽车内饰用革。
Polyurethane fascicular micro-fiber synthetic leather for automotive
- ICS
- 59.080.40
- CCS
- Y47
- 发布
- 2014-07-09
- 实施
- 2014-11-01
本标准规定了橡胶坝坝袋的术语和定义、符号、分类、结构和尺寸、要求、检验规则、标志、包装、运输和贮存、安全、观测和充排控制及安装等。本标准适用于以橡胶涂覆织物制成的橡胶坝坝袋,工作温度为-30 ℃~+ 80 ℃。本标准适用于坝高5. 5 m及以下橡胶坝坝袋及附件。
Rubber dam.rubber dam bag
- ICS
- 59.080.40
- CCS
- G42
- 发布
- 2014-05-12
- 实施
- 2014-10-01
5.1 This test method is considered satisfactory for acceptance testing of commerical shipments since the method has been used extensively in the trade for acceptance testing. 5.1.1 In cases of a dispute arising from differences in reported test results when using this test method for acceptance testing of commercial shipments, the purchaser and the supplier should conduct comparative tests to determine if there is a statistical bias between their laboratories. Competent statistical assistance is recommended for the investigation of bias. As a minimum, the two parties should take a group of test specimens which are as homogeneous as possible and which are from a lot of material of the type in question. The test specimens should then be randomly assigned in equal numbers to each laboratory for testing. The average results from the two laboratories should be compared using Student''s t-test for unpaired data and an acceptable probability level chosen by the two parties before the testing begins. If a bias is found, either its cause must be found and corrected or the purchaser and the supplier must agree to interpret future test results in the light of the known bias. 5.2 Vinyl-coated glass yarn insect screening and louver cloth are subjected to a heating process to fuse the warp yarns to the filling yarns of the woven structure. The force at which yarns in one direction move over yarns in the opposite direction is a measure of the bond of fusion. The degree of the bond of fusion on the vinyl-coated glass yarn insect screening and louver cloth is used for process control. Fabric stability was formerly called resistance to yarn slippage. 1.1 This test method provides a procedure for evaluating fabric stability by measuring the resistance to yarn slippage of filling yarns over warp yarns, or warp yarns over filling yarns in vinyl-coated glass yarn insect screening and louver cloth. 1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Test Method for Fabric Stability of Vinyl-Coated Glass Yarn Insect Screening and Louver Cloth
- ICS
- 59.080.40
- CCS
- 发布
- 2014-02-01
- 实施
