共找到 885 条与 涂覆织物 相关的标准,共 59 页
Artificial Leather Test Methods for Synthetic Leather Determination and Evaluation of Surface Wrinkles
本文件描述了在折叠条件下测定橡胶或塑料涂覆织物耐曲挠性的试验方法。 本方法适用于可夹持在试验装置中,并在试验过程中翻折后的褶皱可沿试样往复运动的,在完成曲挠次数(见3.2)或在指定的曲挠循环次数后,以试样的外观变化作为折叠条件下耐曲挠性衡量标准的橡 胶或塑料涂覆织物。
Rubber- or plastics-coated fabrics—Physical and mechanical tests—Determination of flex resistance by the flexometer method
本文件描述了测定人造革合成革潜在酚黄变的试验方法。 本文件适用于测定人造革合成革潜在酚黄变。
Test method of artificial leather and synthetic leather—Determination of the potential to phenolic yellowing
本文件描述了四种评价涂覆织物耐加速老化性能的试验方法。
Rubber- or plastics-coated fabrics—Accelerated-ageing tests
本文件规定了汽车用聚氨酯合成革的通用技术要求、试验方法和检验规则。 本文件适用于以布基、聚氨酯树脂等为主要原料,经湿法或干法聚氨酯涂层以及后加工而制成的汽车用聚氨酯合成革。
General technical requirements for polyurethane synthetic leather used for vehicle
本文件描述了使用泰伯磨耗机测定涂覆织物耐磨性的方法。
Rubber- or plastics-coated fabrics—Determination of abrasion resistance—Taber abrader
本文件描述了将橡胶或塑料涂覆织物暴露在低温一定时间后,在规定温度下承受弯曲,以测定其抗低温性能的试验方法。 本文件适用于厚度为0.1 mm~2.2 mm 的涂覆织物。对于大于上述厚度的材
Rubber- or plastics-coated fabrics—Low-temperature bend test
本标准规定了测定人造革合成革拉伸负荷及断有伸长率的原理、三种试验方法,即条样法(A法)、抓样法(B法)、哑铃形样法(C法),以及试验报告。本标准适用于人造革合成革进行拉伸负荷及断裂伸长率测定的试验。
Test method of artificial leather and synthetic leather—Determination of tensile load and elongation at break
本标准规定了人造革合成革耐揉搓性的测定试样制备、试验方法、试验报告。本标准适用于测定人造革合成革及其制成品的耐揉搓性。
Test method of artificial leather and synthetic leather—Determination of rubbing resistance
本标准规定了人造革合成革及其制成品耐寒性测定的原理.试样制备.试验方法(A法.B法和C法)以及试验报告。本标准适用于测定人造草合成革及其制成品的耐寒性。
Test method of artificial leather and synthetic leather—Determination of cold resistance
Rubber-or plastics-coated fabrics—Test method for wicking of the cloth
Rubber-or plastics-coated fabrics—Test method for liquid contamination
Rubber-or plastics-coated fabrics—Determination of bursting strength—Part 2: Hydraulic method
Rubber-or plastics-coated fabrics—Determination of oil permeability resistance—Cup method
Terminology of artificial leather and synthetic leather
本标准规定了橡胶或塑料涂覆织物接缝耐静载剪切性能测试方法。 本标准适用于橡胶或塑料涂覆织物及制品。
Rubber-or plastics-coated fabrics—Determination of seam dead load shear resistance
GB/T 20027的本部分规定了用机械式操作钢球法测定橡胶或塑料涂覆织物破裂力的试验方法。
Rubber-or plastics-coated fabrics.Determination of bursting strength.Part 1:Steel-ball method
本标准规定了采用红外光谱法和差示扫描量热法,对于主要原料为聚丙烯(PP-R、PP-B或PP-H)的管材、管件的材质鉴别方法,并给出了试样制备和谱图解析的指南。 本标准适用于由单一聚丙烯树脂(PP-R、PP-B或PP-H)制成的管材、管件的材质鉴别,聚丙烯树脂也可参照使用。 本标准不适用于共混树脂制成的管材、管件的材质鉴别,也不适用于β-PP材料。
Identification method for material of polypropylene (PP-R,PP-B,PP-H) pipes or fittings
本标准规定了防水透湿和不透湿服装用涂覆织物的要求。本标准不涉及涂覆织物服装产品的制作方法,但服装的抗渗水性能应不低于涂覆织物的抗渗水性能。
Rubber-or plastics-coated fabrics for water-resistant clothing.Specification
本标准规定了以燃烧法为辅助手段,采用衰减全反射红外光谱法鉴定涂层主体成分的方法。 本标准适用于以纺织品为基布,以聚氨酯.聚毛乙烯\聚丙烯酸酯\橡胶等为涂层的涂层织物。
Textiles.Test method for identification of coated material
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号