59.080.40 涂覆织物 标准查询与下载
共找到 885 条与 涂覆织物 相关的标准，共 59 页
PVC artificial leather for tents
- ICS
- 59.080.40
- CCS
- Y47
- 发布
- 2021-05-17
- 实施
- 2021-10-01
本文件规定了革用聚氨酯树脂绿色设计产品（以下简称“绿色产品”）的术语和定义、评价要求、 产品生命周期评价报告编制方法和评价结论。 本文件适用于革用聚氨酯树脂的绿色设计产品评价。
Technical specification for evaluation of green design products Polyurethane resin for leather
- ICS
- 59.080.40
- CCS
- C265
- 发布
- 2021-05-10
- 实施
- 2022-05-31
本文件规定了家居用水性聚氨酯合成革绿色设计产品（以下简称“绿色产品”）的术语和定义、评 价要求、产品生命周期评价报告编制方法、评价结论。 本文件适用于家居用水性聚氨酯合成革的绿色设计产品评价。
Green Design Product Evaluation Technical Specifications Household Water-based Polyurethane Synthetic Leather
- ICS
- 59.080.40
- CCS
- C292
- 发布
- 2021-05-10
- 实施
- 2022-05-31
本文件规定了按摩椅用聚氨酯超细纤维合成革的产品分类、要求、试验方法、检验规则、标志、包装、运输和贮存。 本文件适用于以超细纤维非织造布为基布、聚氨酯树脂等为主要原料，经聚氨酯树脂浸渍、湿法、减量、后处理及干法贴面等一系列工艺制成的按摩椅用聚氨酯超细纤维合成革。
Polyurethane microfiber synthetic leather for massage chair
- ICS
- 59.080.40
- CCS
- C292
- 发布
- 2021-05-10
- 实施
- 2022-05-31
1.1?This test method covers the determination of the wear resistance of fabrics coated with rubber or plastics to abrasion. The abrasion is measured by mass loss or number of cycles required to wear through the coating to initially expose the base fabric. 1.2?The values stated
Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform Abrader)
- ICS
- 59.080.40
- CCS
- 发布
- 2021-05-01
- 实施
Rubber- or plastics-coated fabrics —Determination of coating adhesion
- ICS
- 59.080.40
- CCS
- 发布
- 2021-03-16
- 实施
Rubber- or plastics-coated fabrics —Determination of coating adhesion
- ICS
- 59.080.40
- CCS
- 发布
- 2021-03-16
- 实施
本文件规定了镀银纤维纺织品的产品分类、技术要求、试验方法及标志、包装、运输和贮存。 本文件适用于采用镀银纤维织造或特殊方法对织物进行镀银加工制成的镀银纤维纺织品，包括机织物、针织物和无纺布及纺织制品。
Silver plated fiber textiles
- ICS
- 59.080.40
- CCS
- C177
- 发布
- 2021-03-09
- 实施
- 2021-07-05
Rubber- or plastics-coated fabrics - Determination of bursting strength - Part 1: Steel-ball method (ISO 3303- 1:2020)
- ICS
- 59.080.40
- CCS
- 发布
- 2021-03-08
- 实施
- 2021-03-08
Rubber- or plastics-coated fabrics - Determination of bursting strength - Part 2: Hydraulic method (ISO 3303- 2:2020)
- ICS
- 59.080.40
- CCS
- 发布
- 2021-03-08
- 实施
- 2021-03-08
Rubber or plastic coated fabrics - Physical and mechanical test - Determination of bending force (ISO 22751:2020)
- ICS
- 59.080.40
- CCS
- 发布
- 2021-03-04
- 实施
- 2021-03-04
Rubber or plastic coated fabrics - Physical and mechanical test - Determination of bending force (ISO 22751:2020)
- ICS
- 59.080.40
- CCS
- 发布
- 2021-01-00
- 实施
- 2021-01-01
Rubber- or plastics-coated fabrics - Determination of bursting strength - Part 1: Steel-ball method (ISO 3303-1:2020)
- ICS
- 59.080.40
- CCS
- 发布
- 2021-01-00
- 实施
- 2021-01-01
Rubber- or plastics-coated fabrics - Determination of bursting strength - Part 2: Hydraulic method (ISO 3303-2:2020)
- ICS
- 59.080.40
- CCS
- 发布
- 2021-01-00
- 实施
- 2021-01-01
Rubber- or plastics-coated fabrics. Determination of tensile strength and elongation at break
- ICS
- 59.080.40
- CCS
- 发布
- 2021-00-00
- 实施
- 2022-06-01
Rubber- or plastics-coated fabrics. Determination of tear resistance. Part 1. Constant rate of tear methods
- ICS
- 59.080.40
- CCS
- 发布
- 2021-00-00
- 实施
- 2022-06-01
1.1 Fabrics coated with rubber or rubber-like materials display increased stiffening when exposed to decreasing ambient temperatures. This test method describes a simple pass/ fail procedure whereby material flexibility at a specified low temperature can be determined. Failure is indicative of unacceptability of the coated fabric for use at that temperature. 1.2 The values stated in SI units are to be regarded as standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific precautionary statement see 8.1. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Test Method for Coated Fabrics—Low-Temperature Bend Test
- ICS
- 59.080.40
- CCS
- 发布
- 2021
- 实施
- 0000-00-00
Rubber- or plastics-coated fabrics - Determination of bursting strength - Part 1: Steel-ball method (ISO 3303-1:2020)
- ICS
- 59.080.40
- CCS
- 发布
- 2020-12-15
- 实施
- 2020-12-15
Rubber- or plastics-coated fabrics - Determination of bursting strength - Part 1: Steel-ball method (ISO 3303-1:2020)
- ICS
- 59.080.40
- CCS
- 发布
- 2020-12-15
- 实施
- 2020-12-15
Rubber or plastic coated fabrics - Physical and mechanical test - Determination of bending force (ISO 22751:2020)
- ICS
- 59.080.40
- CCS
- 发布
- 2020-12-15
- 实施
- 2020-12-15
