59.100.01 复合增强材料综合 标准查询与下载

DS/EN ISO 1890:2009 增强纱线捻度的测定

This International Standard specifies a method for the determination of twist in yarns made from textile glass, carbon, aramid or any other reinforcement fibres.The method applies to single yarns (one twist) and to folded or cabled yarns (two or more twists). For folded and cabled yarns, the method is generally applied only to the final twist step.This International Standard is applicable to package-wound yarns. If the measurement is carried out on yarns taken from a beam (or warp) or from a fabric, the result is of an indicative nature only.The method is not applicable to products made from staple fibres.

Reinforcement yarns - Determination of twist

EN ISO 1889:2009 加固纱线.线性密度的测定

This International Standard specifies a method for the determination of the linear density of glass-fibre, carbon-fibre, aramid-fibre and any other reinforcement-fibre yarns.It is applicable to all types of yarn, including single yarns, double and cabled yarns, textured yarns, rovings and staple-fibre yarns.

Reinforcement yarns - Determination of linear density (ISO 1889:2009)

ISO 1889:2009 加固纱线.线密度测定

Reinforcement yarns - Determination of linear density

EN ISO 1890:2009 加固纱线.捻度的测定

This International Standard specifies a method for the determination of twist in yarns made from textile glass, carbon, aramid or any other reinforcement fibres.The method applies to single yarns (one twist) and to folded or cabled yarns (two or more twists). For folded and cabled yarns, the method is generally applied only to the final twist step.This International Standard is applicable to package-wound yarns. If the measurement is carried out on yarns taken from a beam (or warp) or from a fabric, the result is of an indicative nature only.The method is not applicable to products made from staple fibres

Reinforcement yarns - Determination of twist (ISO 1890:2009)

ISO 1890:2009 增强纱线.捻度的测定

This International Standard specifies a method for the determination of twist in yarns made from textile glass, carbon, aramid or any other reinforcement fibres. The method applies to single yarns (one twist) and to folded or cabled yarns (two or more twists). For folded and cabled yarns, the method is generally applied only to the final twist step. This International Standard is applicable to package-wound yarns. If the measurement is carried out on yarns taken from a beam (or warp) or from a fabric, the result is of an indicative nature only. The method is not applicable to products made from staple fibres.

Reinforcement yarns - Determination of twist

LST EN 13417-2-2002 增强材料 机织物规范 第2部分：测试方法和一般要求

Reinforcement - Specifications for woven fabrics - Part 2: Methods of test and general requirements

LST EN 13417-1-2002 增强材料 机织物规范 第1部分：名称

Reinforcement - Specifications for woven fabrics - Part 1: Designation

LST EN 13417-3-2002 增强材料 机织物规范 第3部分：特殊要求

Reinforcement - Specifications for woven fabrics - Part 3: Specific requirements

DIN EN 13417-3:2002 增强材料.机织物规范.第3部分:特殊要求

This Part 3 of EN 13417 a specification for woven fabrics made from continuous filament reinforcement yarns, tows and rovings, which may be used as the basis for specifications. The specification defines those parameters which shall be specified plus other parameters which may be specified if required for a particular application or processing method. The specification does not define absolute or nominal values for any parameter.

Reinforcement - Specifications for woven fabrics - Part 3: Specific requirements; German version EN 13417-3:2001

DIN EN 13417-1:2002 增强材料.机织物规范.第1部分:命名

Reinforcement - Specifications for woven fabrics - Part 1: Designation; German version EN 13417-1:2001

DS/EN 13417-3:2001 增强材料 机织物规范 第3部分：特殊要求

This part 3 of EN 13417 defines a specification for woven fabrics made from continuous filament reinforcement yarns, tows and rovings, which may be used as the basis for specifications. The specification defines those parameters which shall be specified plus other parameters which may be specified if required for a particular application or processing method.

Reinforcement - Specifications for woven fabrics - Part 3: Specific requirements

DS/EN 13417-2:2001 增强材料 机织物规范 第2部分：测试方法和一般要求

This part 2 of EN 13417 defines the test methods to be used to determine the designated and specified properties given in Part 1 &3 respectively. This part 2 of EN 13417 defines the general requirements applicable to the specification of all typer of woven fabrics falling within the scope of this specification as defined in Part 1 of the standard.

Reinforcement - Specifications for woven fabrics - Part 2: Methods of test and general requirements

DS/EN 13417-1:2001 增强材料 机织物规范 第1部分：名称

This Part 1 of EN 13417 establishes a method of designation for woven fabrics which may be used as a basis for specifications of fabrics used for the reinforcement of plastics. This designation system applies to fabrics made from para-aramid, carbon, glass, polyethylene, polyester and ceramic fibre in the form of single yarns, plied yarns, cabled yarns, textured yarns, rovings, tows, etc. and which are intended to provide reinforcement in plastic composite materials.

Reinforcement - Specifications for woven fabrics - Part 1: Designation

BS EN 13417-3:2001 加筋.机织物规范.专门要求

1.1This Part 3 of EN 13417 defines a specification for woven fabrics made from continuous filament reinforcement yarns,tows and rovings,which may be used as the basis for specifications. The specification defines those parameters which shall be specified plus other parameters which may be specified if required for a paticular application or processing method. 1.2 The specification does not define absolute or nominal values for any parameter.The value of a specified parameter is to be defined by the manufacturer but thes specification defines the method of test to be used to determine the value of each specified parameter and the tolerance about which the parameter shall be controlled by the manufacturer. 1.3 The parameters which shall always be defined in any woven reinforcement fabric specification are defined in 4.1 In 4.2 the manufacturer shall define other obligatory information to be included in the specification.Other parameters can be included in the specification by agreement between manufacture and customer.These parameters are defined inclause 4.3.

Reinforcement - Specifications for woven fabrics - Specific Requirements

BS EN 13417-1:2001 加筋.机织物规范.标识

1.1 basis for specifications of fabrics used for the reinforcement of plastics. This Part 1 of EN 13417 establishes a method of designation for woven fabrics which may be used as a 1.2 This designation system applies to fabrics made from para-aramid, carbon, glass, polyethylene, polyester and ceramic fibre in the form of single yarns, plied yarns, cabled yarns, textured yarns, rovings, tows, etc. and which are intended to provide reinforcement in plastic composite materials. The material used may be used on its own or in combination (hybrids). 1.3 families and sub-families of fabrics. The designation of a fabric is structured in a product hierarchy which includes several levels which determine It is not intended that this hierarchy takes into account all the attributes of individual fabrics which may use different yarn types or different yarn counts. Neither is it intended to imply that woven fabrics having the same designation give necessarily the same performance. This Part 1 of EN 13417 does not give engineering data, performance data or data which may be required to specify woven fabrics for a particular application or method of processing. If such additional properties are required they shall be determined in accordance with the test methods specified in EN 1341 7-2.

Reinforcement - Specifications for woven fabrics - Designation

BS EN 13417-2:2001 加筋.机织物规范.试验方法和一般要求

1.1 properties given in Parts 1 & 3 respectively. This Part 2 of EN 13417 defines the test methods to be used to determine the designated and specified 1.2 woven fabrics falling within the scope of this specification as defined in Part 1 of the standard. This Part 2 of EN 13417 defines the general requirements applicable to the specification of all types of

Reinforcement - Specifications for woven fabrics - Methods of test and general requirements

DS/EN 13473-1:2001 增强材料 多轴向多层织物规范 第1部分：名称

This part 1 of EN 13473 establishes a method of designation for multi-axial multi-ply fabrics which shall be used for specifications for the reinforcement of materials. The method of designation defines the structure of the multi-axial multi-ply construction and the binding system.

Reinforcement - Specifications for multi-axial multi-ply fabrics - Part 1: Designation

DS/EN 13473-3:2001 增强材料 多轴多层织物规范 第3部分：特殊要求

This Part 3 of EN 13473 is a specification of multi-axial multi-ply fabrics made from reinforcement yarns, tows, rovings, fibre fleeces, films, foams or other materials which are intended to provide reinforcement in compostie materials and which is bound to a multi-ply construction. This specification defines those parameters which are required for a particular application or processing method.

Reinforcement - Specifications for multi-axial multi-ply fabrics - Part 3: Specific requirements

DS/EN 13473-2:2001 增强材料 多轴多层织物规范 第2部分：测试方法和一般要求

This part 2 of EN 13473 defines the test methods to be used to determine the designated and specified properties given in Part 1 and 3 respectively. Part 2 of EN 13473 defines the general requirements applicable to the specification of all types of multi-axial multi-ply fabrics falling within the scope of this specification as defined in Part 1 of this Standard.

Reinforcement - Specifications for multi-axial multi-ply fabrics - Part 2: Methods of test and general requirements

EN 13417-2:2001 加强物.编织品规范.第2部分:试验方法和一般要求

This Part 2 of EN 13417 definesThe test methods to be used to determineThe designated and specifiedproperties given in Parts 1&3 respectively.1.2 This Part 2 of EN 13417 definesThe general requirements applicable toThe specification of all types ofwoven fabrics falling withinThe scope of this specification as defined in Part 1 of the standard.

Reinforcement - Specifications for woven fabrics - Part 2: Methods of test and general requirements