59.100.01 复合增强材料综合 标准查询与下载

BS EN ISO 3344:1997 增强制品.水份含量的测定

This International Standard specifies a method for the determination of the moisture content of reinforcement products, such as continuous-filament yam, staple-fibre yam, rovings, chopped strands, mats, fabrics and other forms of reinforcement made from textile glass, carbon or aramid fibres.

Reinforcement products - Determination of moisture content

EN ISO 3344:1997 增强制品.水份含量的测定ISO 3344-1997

Reinforcement Products - Determination of Moisture Content ISO 3344: 1997

EN ISO 1890:1997 增强纱线.转数测定 ISO 1890-1997

Reinforcement Yarns - Determination of Twist ISO 1890: 1997

EN ISO 1889:1997 增强丝纱.线密度的测定 ISO 1889-1997

Reinforcement Yarns - Determination of Linear Density ISO 1889: 1997

ISO 1890:1997 增强纱 捻度的测定

This International Standard specifies a method for the determination of twist in yarns made from textile glass, carbon or aramid filaments. The method applies to single yarns (one twist) and to folded or cabled yarns (two or more twists). For folded and cabled yarns, the method is generally applied only to the final twist step. This International Standard is applicable to package-wound yarns. If the measurement is carried out on yarns taken from a beam (or warp) or from a fabric, the result is of an indicative nature only. The method is not applicable to products made from staple fibres.

Reinforcement yarns - Determination of twist

ISO 3344:1997 增强制品 含湿量的测定

This International Standard specifies a method for the determination of the moisture content of reinforcement products, such as continuous-filament yarn, staple-fibre yarn, ravings, chopped strands, mats, fabrics and other forms of reinforcement made from textile glass, carbon or aramid fibres.

Reinforcement products - Determination of moisture content

ISO 1889:1997 增强纱 线密度的测定

This International Standard specifies a method for the determination of the linear density of glass-fibre, carbon-fibre and aramid-fibre yarns. It is applicable to all types of yarn, including single yarns, double and cabled yarns, textured yarns, ravings and staple-fibre yarns.

Reinforcement yarns - Determination of linear density

YB/T 917-1997 碳素材料钒的比色测定

Carbonaceous materials.Determination of vanadium content.Colorimetric method

NF T25-023*NF ISO 10122:1996 加固材料.管式编织管套.规范基础

Reinforcement materials. Tubular braided sleeves. Basis for a specification.

BS ISO 10371:1993 纤维增强塑料 用于复合材料增强的编织带 规范的基础

1   Scope This International Standard provides a basis for specifications applicable to braided tapes used as reinforcements in plastics. It deals with tapes braided from all types of yarn or roving.

Fibre reinforced plastics. Braided tapes for composite materials reinforcement. Basis for a specification

BS ISO 10371:1995 纤维加强塑料.复合加强材料用编织带.规范基础

Applies to tapes braided from all types of yarn or roving used as reinforcements in plastics. Deals with designation, characteristics to be specified, defects, sampling and selection of test pieces, test methods, packaging and ordering.

Fibre reinforced plastics - Braided tapes for composite materials reinforcement - Basis for a specification

ISO 10122:1995 增强材料 管型编织套 基本规范

Provides a basis for specifications applicable to tubular braided sleeves used as reinforcements in plastics. Deals with tubular sleeves braided from all types of yarn or roving.

Reinforcement materials - Tubular braided sleeves - Basis for a specification

HB 7071-1994 碳纤维复合材料层合板边缘分层拉伸试验方法

本标准规定了碳纤维复合材料层合板边缘分层拉伸试验的试样、试验标准环境条件及度样状态调节、试验设备、试验频、试验结果以及试验报告。 　　本标准适用于测定韧性树脂基碳纤维复合材料〔±30°/±30°/90°/90°〕s层合板的边缘分层层间断裂韧度Gc。

Method for tensile test of edge delamination on laminated sheet of carbon fiber composite materials

ISO 10371:1993 增强材料 编织带 基本规范

Applies to tapes braided from all types of yarn or roving used as reinforcements in plastics. Deals with designation, characteristics to be specified, defects, sampling and selection of test pieces, test methods, packaging and ordering.

Reinforcement materials; braided tapes; basis for a specification

HB 6741-1993 碳纤维复合材料层合板开孔压缩试验方法

本标准规定了碳纤维复合材料层合板开孔压缩强度试验的试样、试验设备、试验步骤、结果计算和试验报告内容。 　　本标准适用于测定碳纤维复合材料［45/0/-45/90］2s层合板的开孔压缩强度。

Method for compressive test of open hole on laminated sheet of carbon fiber composite materials

ASTM D4393/D4393M-10 橡胶化合物补强用线绳或织物的搭接脱落粘合力的标准试验方法

Single Test Cord8212; Adhesive treating of cords singly or adhesive treating individual ends simultaneously (referred to as “multi-cord treating” as opposed to “fabric treating”) and winding the cords as single ends is the most common laboratory method of preparing reinforcement materials for evaluation in reinforced rubber articles such as tires, belts, and hoses. This system of adhesive treating facilitates the study of a large number of adhesion variables at minimum cost. This test method provides a good comparison of variables on adhesion because it produces both an average numerical value of peel force over several linear centimetres of cord and provides convenient specimens for assessing appearance (see 11.3) of the peeled area as well. It may be used for purchase specification requirements for adhesive treated cords, steel tire cord, adhesives, rubber compounds, or manufacturing control of such products. Preparation of weftless fabric from single cord is not recommended for acceptance testing of commercial shipments of tire cord fabric because single cords of long length cannot be conveniently obtained from fabric for drumwinding. See 5.2.2. This test method is usually not preferred for acceptance testing of commercial shipments of adhesive treated cord, such as single end cord for hose. The more usual and convenient method for acceptance testing of such single cords is to prepare from a shipment a test piece or article in the same manner as the commercial article to be produced and to test cord-adhesion characteristics in this piece in a manner that compares its adhesion characteristics against a previously established, acceptable control. “H” and“ U” tests (Test Methods ) provide convenient and rapid adhesion results for acceptance testing of textile cords if needed. For steel cord, Test Method D2229 provides convenient and rapid adhesion results. Using Woven Fabric8212;The woven fabric method of 4.2-4.4 is often chosen for rapid adhesion testing of textile woven fabric being adhesive treated in large volume. Fabric is tested “as is” and, through experience, constitutes a valuable process control tool. The same basic test can be conveniently executed by the receiving customer for process control purposes by sampling rubberized fabric from that to be processed into finished rubber articles. This test method may be used for acceptance testing of commercial shipments of adhesive treated fabric, but duplicate numerical values for peel force and appearance are not to be expected between two testing locations. Rubber compound differences are only one of many parameters affecting peel force and appearance. Nevertheless, the expected range of values which characterize acceptable adhesion can be determined in any cord-rubber combination with experience. For this reason, the buyer normally establishes a minimum level of adhesion to be obtained by the seller in the seller's laboratory using either the seller's standard rubber compound or the buyer's rubber compound on the fabric made to the buyer's specification. In case of a dispute arising from differences in reported test results when using Test Method D4393 for acceptance testing of commercial ship......

Standard Test Method for Strap Peel Adhesion of Reinforcing Cords or Fabrics to Rubber Compounds