59.120.30 织机、织造机器 标准查询与下载
共找到 423 条与 织机、织造机器 相关的标准，共 29 页
This International Standard specifies the dimensions of paper patterns for dobbies for use in the textile industry.
Textile machinery and accessories -- Paper patterns for dobbies -- Dimensions
- ICS
- 59.120.30
- CCS
- 发布
- 2015-09-03
- 实施
This International Standard gives the principle for the numbering of the heald frames and drop wire bars of the warp stop motions in a loom.
Textile machinery and accessories -- Numbering of heald frames and drop wire bars in a loom
- ICS
- 59.120.30
- CCS
- 发布
- 2015-09-03
- 实施
This part of ISO 366 specifies the dimensions and designation of profile capsules for weaving machine reeds. These capsules are used to manufacture plastic-bound metal reeds according to ISO 366-4.
Textile machinery and accessories -- Reeds -- Part 5: Dimensions and designation of profile capsules
- ICS
- 59.120.30
- CCS
- 发布
- 2015-09-03
- 实施
This International Standard gives the designations of dimensions of serrated bars for mechanical warp stop motions. Values of the dimensions of the cross-section of assembled serrated bars are also given. NOTE— In addition to the designations given in the three official ISO languages (English, French and Russian), this International Standard gives, in an annex, the equivalent designations in German; these have been included at the request of ISO Technical Committee TC 72 and are published under the responsibility of the member body for Germany (DIN). However, only the designations given in the three official languages can be considered as ISO designations.
Textile machinery and accessories -- Serrated bars for mechanical warp stop motions -- Designations of dimensions, and dimensions of cross-section
- ICS
- 59.120.30
- CCS
- 发布
- 2015-09-03
- 实施
This International Standard specifies the main dimensions and the co-ordination of heald carrying rods for healds with closed"0"-shaped end loops.
Textile machinery and accessories -- Heald carrying rods for healds with closed "O"-shaped end loops
- ICS
- 59.120.30
- CCS
- 发布
- 2015-09-03
- 实施
This International Standard lays down the main dimensions of twin wire healds with inset mail for Jacquard weaving.
Textile machinery and accessories -- Twin wire healds with inset mail for Jacquard weaving
- ICS
- 59.120.30
- CCS
- 发布
- 2015-09-03
- 实施
This International Standard specifies the dimensions of 90° shuttles for pirn changing automatic looms used in the textile industry.
Textile machinery and accessories -- Shuttles for pirn changing automatic looms -- Dimensions
- ICS
- 59.120.30
- CCS
- 发布
- 2015-09-03
- 实施
This part of ISO 366 specifies the dimensions and designation of metal reeds with double-spring baulk for weaving machines.
Textile machinery and accessories -- Reeds -- Part 3: Dimensions and designation of metal reeds with double-spring baulk
- ICS
- 59.120.30
- CCS
- 发布
- 2015-09-03
- 实施
This International Standard establishes a system for the numbering of harnesses used for drawing-in on Jacquard weaving machines. It covers continuous pattern cards, banded pattern cards, Jacquard machines, comber boards and harness cord guides for the manufacture of fabrics, the face sides of which lie uppermost in the weaving machine. This International Standard does not cover Jacquard equipment for special patterns (for example, symmetrical harnesses) where the standardized pattern holes, hooks and harness cords do not control the first warp threads but rather those determined by the particular type of equipment used. This International Standard may also not apply fully to some types of Wilton carpet weaving, where certain full rows of cords from the Jacquard do not go straight down to the same appropriate rows in the comber board, and full rows of cords across the Jacquard must be crossed back to the front of the comber board. When reference is made to the drawing-in of harnesses, this is always to complete rows of hooks for the sake of greater clarity.
Textile machinery and accessories -- Numbering of harnesses for drawing-in on Jacquard machines
- ICS
- 59.120.30
- CCS
- 发布
- 2015-09-03
- 实施
本标准规定了挠性剑杆织机用导剑钩（以下简称“导剑钩”）的术语和定义、分类和标记、要求、试验方法、检验规则、包装、标志、运输和储存。 本标准适用于挠性剑杆织机用导剑钩。
Rapier guiding hooks for flexible rapier machines
- ICS
- 59.120.30
- CCS
- W94
- 发布
- 2015-07-14
- 实施
- 2016-01-01
This part of ISO 9473 specifies the dimensions and the designation of hardened strip steel used to manufacture dents of reeds, according to ISO 366-1, ISO 366-2, ISO 366-3, and ISO 366-4
Textile machinery and accessories -- Strip steel for dents of reeds -- Part 2: Hardened strip steel
- ICS
- 59.120.30
- CCS
- 发布
- 2014-12-25
- 实施
This International Standard defines the basic terms, lays down the main dimensions and gives specifications of cloth rollers used for winding fabrics and feeding subsequent machines. NOTE — In addition to terms given in the three official ISO languages (English, French, and Russian), this International Standard also gives the equivalent terms in German; these terms have been included at the request of ISO/TC 72 and are published under the responsibility of the member bodies for the Federal Republic of Germany (DIN) and Switzerland (SNV). However, only the terms and definitions given in the official languages may be considered as ISO terms and definitions.
Textile machinery -- Cloth rollers -- Terminology and main dimensions
- ICS
- 59.120.30
- CCS
- 发布
- 2014-12-25
- 实施
This International Standard specifies the dimensions and designation for reeds used for air jet weaving machines.
Textile machinery and accessories -- Profile reeds for air jet weaving machines -- Dimensions
- ICS
- 59.120.30
- CCS
- 发布
- 2014-12-25
- 实施
This International Standard specifies the various maximum usable widths for the entry and delivery sections of a warp sizing machine.
Textile machinery -- Warp sizing machines -- Maximum usable width
- ICS
- 59.120.30
- CCS
- 发布
- 2014-12-25
- 实施
本标准规定了储纬器分类及基本参数、技术要求、试验方法、检验规则、标志、包装、运输和贮存。本标准适用于与无梭织机配套的储纬器。本标准不适用于无驱动电机纯机械类储纬器。
Weft accumulator
- ICS
- 59.120.30
- CCS
- W94
- 发布
- 2014-05-06
- 实施
- 2014-10-01
This part of ISO 8118 defines the basic terms and gives the nomenclature, technical specifications and designation for weaving machine temple cylinders used in the textile industry.
Textile machinery -- Weaving machine temples -- Part 1: Temple cylinders
- ICS
- 59.120.30
- CCS
- 发布
- 2013-12-31
- 实施
Textile machinery -- Weaving machine temples -- Part 1: Temple cylinders
- ICS
- 59.120.30
- CCS
- W91
- 发布
- 2013-12-31
- 实施
This part of ISO 8118 defines the basic term and gives the nomenclature, technical specifications and designation for full-width weaving machine temples used in the textile industry.
Textile machinery - Weaving machine temples - Part 2: Full-width temples
- ICS
- 59.120.30
- CCS
- 发布
- 2013-12-31
- 实施
本标准规定了纸容器缺陷在线检测仪(以下简称检测仪)的要求、试验方法、检验规则和标志、包装、运输及贮存。本标准适用于纸杯、纸碗、纸塑杯等纸容器包装品的外观缺陷检测仪器。
Online checkout equipment for paper container defect
- ICS
- 59.120.30
- CCS
- Y91
- 发布
- 2013-12-31
- 实施
- 2014-07-01
