共找到 125 条与 其他纺织机械 相关的标准,共 9 页
To be read in conjunction with BS EN ISO 11111-1
Textile machinery - Safety requirements - Yarn processing, cordage and rope manufacturing machinery
To be read in conjunction with BS EN ISO 11111-1, BS EN ISO 11111-2, BS EN ISO 11111-6, BS EN ISO 11111-7
Textile machinery - Safety requirements - Nonwoven machinery
To be read in conjunction with BS EN ISO 11111-1
Textile machinery - Safety requirements - Fabric manufacturing machinery
This part of ISO 11111 is intended to be used in conjunction with ISO 11111-1, ISO 11111-2, ISO 11111-6 and ISO 11111-7. It specifies significant hazards and corresponding safety requirements and/or measures for nonwoven machinery. By taking into account the scope of ISO 11111-1 as far as is relevant, this part of ISO 11111 is applicable to all machinery, plant and related equipment intended to be used for opening, cleaning, blending, carding, needle punching, cylinder drying and batching, as specified in Clause 5
Textile machinery - Safety requirements - Part 3: Nonwoven machinery (ISO 11111-3:2005)
This part of ISO 11111 is intended to be used in conjunction with ISO 11111-1. It specifies significant hazardsand corresponding safety requirements and/or measures for yarn processing, cordage and ropemanufacturing machinery. By taking into account the scope of ISO 11111-1 as far as is relevant,This part ofISO 11111 is applicable to all machinery, plant and related equipment intended to be used for doubling,twisting, texturing, reeling, winding, ball winding, cordage, rope manufacturing and braiding, as specified inClause 5.
Textile machinery - Safety requirements - Part 4: Yarn processing, cordage and rope manufacturing machinery (ISO 11111-4:2005)
This part of ISO 11111 is intended to be used in conjunction with ISO 11111-1, ISO 11111-2, ISO 11111-6 and ISO 11111-7. It specifies significant hazards and corresponding safety requirements and/or measures for nonwoven machinery. By taking into account the scope of ISO 11111-1 as far as is relevant, this part of ISO 11111 is applicable to all machinery, plant and related equipment intended to be used for opening, cleaning, blending, carding, needle punching, cylinder drying and batching, as specified in Clause 5.
Textile machinery - Safety requirements - Part 3: Nonwoven machinery
本标准规定了化纤打包机的分类、基本参数、技术要求、试验方法和检验规则、标志、包装、运输、贮存。 本标准适用于年处理化学短纤维能力0.75~3万t的自动计量提箱式双箱液压打包机。
Bale press for man-made staple fibres
本标准规定了纺织机械(不包括手提式)的电气和电子设备(不包括微处理机)。 注:本标准中的“电气”术语中包含了电气和电子两内容。例如“电气设备”即指电气与电子设备. 本标准中电气设备范围是指设备电源的进线开始,直到拖动机械的电气设备为止。 本标准适用于交流额定电压为500V(包括500V) 、额定频率为200Hz(包括200Hz),直流500V(包括500V)以下的设备如电压和频率超过上述指标时,应由用户厂与制造厂协商解决。 注:左上角有“,”者,仅适用于电子设备。
Technical conditions for electrical equipment of textile machinery
本标准规定了普通络筒机用控制箱的基本参数、技术要求、试验方法、检验规则及标志、包装、运输、贮存的要求。 本标准适用于普通络筒机用控制箱。该控制箱是与槽筒式络筒机配套使用的无触点交流控制设备。
Common winder control box
本标准规定了化纤纺丝计量泵的产品分类、技术要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于粘胶、睛纶、维纶湿法纺丝,睛纶千法纺丝与锦纶、涤纶、丙纶熔融法纺丝使用的齿轮式计量泵。
Chemical fiber spinning metering pump
Temperature circuit detection and control device for chemical fiber equipment
Настоящий стандарт распространяется на машины и оборудование для прачечных и предприятий химчистки и устанавливает общие требования без
Occupational safety standards system. Machines and equipment for laundries and dry-cleaning enterprises. General safety requirements
Knitting Needles Classification Terminology and Product Code Code Product Code Code
Setting stenters. Types and main parameters
Textile machines, tenters. Specific energy consumption values
Machines for textile web length measuring. Types, basic parameters and technical requirements
These construction and safety rules do not apply to the following centrifuges, which are expressively excluded from the field of application of this International Standard: centrifuges in which the kinetic energy of the loaded rotor is less than 750 J; centrifuges considered to be electric motor-driven domestic machines; centrifuges with a circumferential speed greater than 300 m/s; centrifuges used exclusively for processing of atomic energy products.
Centrifuges; Construction and safety rules; Method for the calculation of the tangential stress in the shell of a cylindrical centrifuge rotor
本标准适用于碳弧灯型耐光试验机。
Apparatus for Testing of Colour Fastness to Carbon Arc Lamp Light
Настоящий стандарт распространяется на ленточные машины, применяемые при переработке срдневолокнистого и тонковолокнистого хлопка, хим
Drawframes for cotton and man-made fibres. General specifications
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号