61.060 鞋类 标准查询与下载

T/CIDADS 00006-2022 休闲跑鞋设计指南

本标准给出了休闲跑鞋的鞋楦主要部位尺寸，提供了鞋帮结构设计和样板规范的指南。

Design guidelines for casual running shoes

T/CIDADS 00005-2022 女式皮靴（拉链式）帮样板设计指南

本标准规定了女式皮靴（拉链式）产品分类，提供了帮面结构、帮样板主要部位、鞋面材料厚度的设计指南。

Upper pattern design guidelines for women’s leather boots with zipper

BS EN ISO 19574:2022 鞋类和鞋类零部件 评估抗真菌活性的定性测试方法（生长测试）

What is ISO 19574- T est method to assess the antifungal activity of footwear and footwear components about? ISO 19574 is an international standard on footwear and footwear components that discusses the test method to assess the antifungal activity of footwear and footwear components to ensure protection to the wearer from antifungal activity. ISO 19574 specifies a test method (growth test) for the qualitative evaluation of the antifungal activity of footwear and footwear components exposed to the action of filamentous micro-fungi. ISO 19574 is only applicable to footwear and components that claim to have antifungal (antimycotic) or antimicrobial treatment effects. Who is ISO 19574- T est method to assess the antifungal activity of footwear and footwear components for ? ISO 19574 on the test method to assess the antifungal activity of footwear and footwear components is useful for: Footwear and footwear components manufacturers Footwear and footwear components test personnel Occupational health and safety departments Quality assu...

Footwear and footwear components. Qualitative test method to assess antifungal activity (growth test)

T/NHXY 10-2022 内翻鞋

规定了内翻鞋的术语和定义、要求、试验方法、检验规则、标志、包装、运输和贮存

Inverted shoes

T/NHXY 9-2022 高强度注塑鞋跟

规定了高强度注塑鞋跟的术语和定义、要求、试验方法、检验规则、标志、包装、运输和贮存。

High strength injection molded heel

ASTM D3851-17(2022) 微孔聚氨酯鞋底材料的标准规范

1.1 This specification covers microcellular polyurethane materials for shoe soling applications. It provides physical property requirements and identifies test methods for determining those specific properties. 1.2 SI units are to be regarded as the preferred units of measurements for values. The inch-pound values in parentheses can be used if there is an agreement between the contractual parties. NOTE 1—There is no known ISO equivalent to this standard. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Microcellular Polyurethane Shoe Soling Materials

EN ISO 19574:2022 鞋类和鞋类部件.评估抗真菌活性的定性试验方法（生长试验）

This document specifies a test method (growth test) for the qualitative evaluation of the antifungal activity of footwear and footwear components exposed to the action of filamentous micro-fungi. This document is only applicable to footwear and components that claim to have antifungal (antimycotic) or antimicrobial treatment effects.

Footwear and footwear components - Qualitative test method to assess antifungal activity (growth test) (ISO 19574:2022)

ISO 19574:2022 鞋类和鞋类部件.评估抗真菌活性的定性试验方法（生长试验）

This document specifies a test method (growth tes t) for the qualitative evaluation of the antifungal activity of footwear and footwear components exposed to the action of filamentous micro-fungi. This document is only applicable to footwear and components that claim to have antifungal (antimycotic) or antimicrobial treatment effects.

Footwear and footwear components — Qualitative test method to assess antifungal activity (growth test)

DIN CEN/TR 15990:2022 数据表 鞋类测试材料和测试粘合剂；德文版 CEN/TR 15990:2021

For research, development and quality certification purposes, some simply formulated 1- and 2-part “reference test adhesives” have been developed and, from the most important and most often applied, some materials have been selected as “reference test materials”. This document of

Data sheets - Footwear tests materials and test adhesives; German version CEN/TR 15990:2021

BS EN ISO 16190:2021 鞋类 鞋类和鞋类部件中可能存在的关键物质 鞋材中多环芳烃（PAHs）定量测定的试验方法

What is ISO 16190 about?   ISO 16190 specifies a method to determine the amounts of polycyclic aromatic hydrocarbons (PAHs) in footwear and footwear components.   ISO 16190 helps you improve the safety of the footwear.   Who is ISO 16190 for?   ISO 16190 on the determining polycyclic aromatic...

Footwear. Critical substances potentially present in footwear and footwear components. Test method to quantitatively determine polycyclic aromatic hydrocarbons (PAHs) in footwear materials

BS EN ISO 21061:2021 鞋类 化学测试 样品制备的一般原则

What is ISO 21061 about?    ISO 21061 discusses footwear. Footwear refers to  garments  worn on the feet, which typically serves the purpose of  protection  against adversities of the environment such as wear from ground textures and temperature. ISO 21061 specifies the range of procedures for the sample preparation of footwear and footwear components to carry out the chemical test. It further specifies how to designate samples. The sampling procedures specified are designed to allow concurrent chemical testing footwear.   ISO 21061 is applicable to all types of footwear and footwear components.   Who is ISO 21061 for?   ISO 21061 on footwear is useful for:  

Footwear. Chemical tests. General principles on the preparation of samples

BS EN ISO 16189:2021 鞋类 鞋类和鞋类部件中可能存在的关键物质 鞋材中二甲基甲酰胺定量测定的试验方法

What is ISO 16189 about? ISO 16189 specifies a method to determine the amounts of dimethylformamide (DMF) in footwear and footwear components containing polyurethane (PU) coated material. NOTE 1- In the footwear industry, when PU is injected (reaction moulded), this process does not require the use of DMF. For PU-coated material, the use of DMF is possible. Who is ISO 16189 for ? ISO 16189 on critical substances potentially present in footwear and footwear components-test method to quantitatively determine dimethylformamide in footwear materials are applicable to: Footwear manufactures Chemical laboratories Footwear material suppliers Why should you use ISO 16189? DMF is a colorless, fishy-smelling liquid that is miscible with water and many other organic solvents. It is a solvent commonly used in the production of polyurethane-coated materials such as synthetic leather. It can also be used to process coatings, adhesives, plastics, acrylic fibers, PU resins, or as a cleaning solvent. ISO 16189 helps you determine dimethylformamide in footwear materials.   By determining dimethylformamide from footwear materials, it can help to improve the quality of footwear to check if the footwear is in good condition, comfortable and safe.  ISO 16189 helps you to improve the quality of the footwear in terms of safety. What’s changed since the last update? BS EN ISO 16189:2021 supersedes ISO/TS 16189:2013 . BS EN ISO 16189:2021 includes some technical changes with respect to ISO/TS 16189:2013 . These include: Internal standard solution added

Footwear. Critical substances potentially present in footwear and footwear components. Test method to quantitatively determine dimethylformamide in footwear materials

T/PTSHOES GS006-2021 皮鞋

本文件规定了各种工艺制作的皮鞋的分类、要求、试验方法、检验规则和标志、包装、 运输、贮存。

Leather shoes

T/NHXY 7-2021 鞋用反应型聚氨脂热熔胶

文件规定了鞋用反应型聚氨脂热熔胶的要求、试验方法、检验规则及标志、包装、运输和贮存

Reactive polyurethane hot melt adhesive for shoes

T/PTSHOES 009-2021 橡塑鞋底热压模零件

规定了橡塑鞋底热压模零件的结构、尺寸、材料、热处理等技术要求。

Hot pressing mold parts for rubber and plastic soles

T/PTSHOES GS008-2021 鞋类区域品牌标识使用评定规则

本文件规定了莆田鞋类区域品牌标识使用评定的通用要求和具体方法。 

Footwear Regional Brand Assessment Rules for the Use of Logo

T/PTSHOES GS007-2021 皮凉鞋

本文件规定了使用胶粘、缝制、模压、硫化、注塑、灌注等工艺，以天然皮革、人造革、合成革、纺织物或多种材料为帮面制造的皮凉鞋的技术要求、试验方法、检验规则及包装、运输、贮存。

Leather Sandals

T/PTSHOES GS010-2021 橡塑鞋底热压模 多板式矩形模

本文件规定了橡塑鞋底热压模 多板式矩形模的术语定义、要求、检验方法、验收、标 志、包装、运输和贮存。 本文件适用于橡塑鞋底热压模的多板式矩形模。

Hot pressing mold for rubber and plastic sole Multi-plate rectangular mold

T/PTSHOES GS009-2021 橡塑鞋底热压模 零件

本文件规定了橡塑鞋底热压模 零件的结构、尺寸、材料、热处理等技术要求。 本文件适用于橡塑鞋底热压模 零件。

Hot pressing mold for rubber and plastic sole parts

T/NHXY 8-2021 鞋业企业资源计划（ERP）应用指南

文件给出了鞋业企业资源计划（ERP）应用中的信息化应用领域、ERP系统的管控核心、ERP的工作原理和应用、ERP系统选型、ERP系统的实施和应用等内容

Footwear Enterprise Resource Planning (ERP) Application Guide