共找到 250 条与 农产品加工和贮存用建筑物和装置 相关的标准,共 17 页
1.1 This test method covers the determination of carbohydrates present in a biomass sample, expressed as the percent, by mass, of each sugar on a 105 °C dried mass basis. NOTE 1—The percent sugar must be corrected for the water of hydrolysis before calculating the actual mass percent of the polysaccharide in the original biomass sample. 1.2 Sample materials suitable for this procedure include hard and soft woods, herbaceous materials (such as switchgrass and sericea), agricultural residues (such as corn stover, wheat straw, and bagasse), wastepaper (such as office waste, boxboard, and newsprint), acid or alkaline-pretreated biomass (washed free of any residual acid or alkali), and the solid fraction of fermentation residues. All results are reported relative to the 105 °C oven-dried mass of the sample. 1.3 The options for the types of samples to be analyzed in this test method are as follows: 1.3.1 Prepared Biomass Samples: 1.3.1.1 Air Dried (%Tad)—The percent, by mass, of total solids of the air-dried sample. 1.3.1.2 45 °C Dried (%T45)—The percent, by mass, of total solids of the 45 °C dried sample. 1.3.1.3 Freeze Dried (%Tfd)—The percent, by mass, of total solids of the freeze dried sample. 1.3.2 Extractives-Free Sample (%T ext)—The percent, by mass, of total solids of the extracted sample determined at 105°C. 1.4 The values stated in SI units are to be regarded as the standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Specific precautionary statements are given in Note 3 and Note 4. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Test Method for Determination of Carbohydrates in Biomass by High Performance Liquid Chromatography
1.1 This test method covers the determination of ash, expressed as the mass percent of residue remaining after dry oxidation (oxidation at 575 6 25 °C), of hard and soft woods, herbaceous materials (such as switchgrass and sericea), agricultural residues (such as corn stover, wheat straw, and bagasse), wastepaper (such as office waste, boxboard, and newsprint), acid and alkaline pretreated biomass, and the solid fraction of fermentation residues. All results are reported relative to the 105 °C oven-dried mass of the sample. For particulate wood fuels, Test Method E1534 should be used. 1.2 The values stated in SI units are to be regarded as the standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Test Method for Ash in Biomass
1.1 This test method covers the determination of the amount of total solids remaining after drying a sample. Materials suitable for this procedure include samples prepared in accordance with Practice E1757 and extractive-free material prepared in accordance with Test Method E1690. For particulate wood fuels, Test Method E871 should be used. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Test Method for Determination of Total Solids in Biomass
Grade assessment of pig slaughtering plants (fields)
本标准规定了横向智能通风技术的术语和定义、数据及通讯、智能控制、硬件和安全的要求。 本标准适用于不同储粮生态区原粮储藏过程中横向通风仓房通风作业的智能控制。
Horizontal Intelligent Ventilation Technical Requirements
Technical regulations for horizontal ventilation of bungalow warehouses
Technical Specifications for Green Grain Storage (Temperature and Nitrogen Control)
Technical specifications for the construction and management of fresh milk purchasing stations
本标准规定了棉花轧工质量分级检测方法(仪器法)的术语和定义、检测原理、设备和材料、试验方法、结果计算、精密度。本标准适用于锯齿加工细绒棉轧工质量等级(仪器法)的测定。
Instrumental method for testing quality grading of cotton ginning
Automatic cotton bale polyester strapping machine
本标准规定了棉花轧工质量分级仪(以下简称分级仪)的型号、技术要求、试验方法、检验规则、标志、包装、运输与贮存。本标准适用于棉花加工检验过程中使用的棉花轧工质量等级检测的仪器。
Cotton ginning quality grader
1.1 This practice covers a reproducible way to convert hardwoods, softwoods, herbaceous materials (such as switchgrass and sericea), agricultural residues (such as corn stover, wheat straw, and bagasse), wastepaper (such as office waste, boxboard, and newsprint), cellulosic feedstocks pretreated to improve suitability for fermentation, cereal grains, cereal grain fermentation mash, cereal grain fermentation beer, and fermentation residues into a uniform material suitable for compositional analysis. This practice is intended for samples that need to be dried prior to analysis. 1.2 Milling and sieving actions both produce large amounts of dust. This dust can be a nuisance hazard and irritant. Use appropriate respiratory protection as needed. If excessive amounts of dust are allowed to become airborne a potential explosion hazard is possible. Provide appropriate dust control measures as needed. 1.3 The values stated in SI units are to be regarded as standard. The values given in parentheses after SI units are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Practice for Preparation of Biomass for Compositional Analysis
Technical regulations for storage, preservation and commercialization of navel oranges
本标准规定了蒸汽式湿法鱼粉干燥机的术语与定义、基本要求、技术要求、试验方法、检验规则、标志、运输、贮存及质量承诺。 本标准适用于蒸汽为介质的湿法鱼粉干燥机(以下简称“干燥机”)。
Indirect-steam wet fish meal dryer
Sheep Slaughter Operation Procedures
Standardized Slaughter Inspection Operation Procedures for Pig Slaughtering Plants
Complete set of equipment for rubbing and sorting green peppers
Construction and management regulations of fresh milk purchase station
Potato Cultivation Technical Regulations
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号